Andoer D2 Handheld RGB LED Video Light Wand User Manual

Introdución

Grazas pola compraasing the Andoer D2 Handheld RGB LED Video Light Wand. This manual provides detailed instructions for the safe and effective use of your new light wand. Please read this manual thoroughly before operation and retain it for future reference.

Información de seguridade

• Non expoñas o dispositivo á auga nin a alta humidade.
• Evite a exposición directa dos ollos á fonte de luz.
• Non desmontes nin modifiques o dispositivo. As reparacións só deben ser realizadas por persoal autorizado.
• Manter fóra do alcance dos nenos.
• Use só o cable de carga fornecido ou certificado.
• Non o opere en ambientes con gases ou líquidos inflamables.

Contido do paquete

Comprobe o contido do paquete ao abrilo. Se falta algún artigo ou está danado, póñase en contacto co seu vendedor.

• Andoer D2 Handheld RGB LED Video Light Wand
• Cable de carga USB tipo C
• Manual de usuario (este documento)

Produto rematadoview

Familiarize yourself with the components and controls of the Andoer D2 light wand.

Imaxe: Acabadoview of the Andoer D2 light wand, showing its dimensions (approximately 49.5cm / 19.5in long and 3.8cm / 1.5in diameter) and control panel. The control panel includes a Power Indicator Light, Mode Selection button, Power Switch, Brightness + button, Brightness - button, and a Charging Port.

Funcións do panel de control:

• Interruptor de alimentación: Turns the light wand on or off.
• Selección de modo: Cycles through different lighting modes (e.g., CCT mode, RGB color effects).
• Brillo +: Increases the light brightness.
• Brillo -: Decreases the light brightness.
• Luz indicadora de potencia: Shows the power status and charging status.
• Porto de carga (tipo C): Úsase para cargar a batería interna.

Configuración

Carga inicial:

Before first use, fully charge the light wand. Connect the provided USB Type-C cable to the charging port on the device and the other end to a USB power adapter (not included) or a computer USB port. The power indicator light will show charging status.

Imaxe: Un primeiro plano view of the Type-C charging port, indicating where to connect the charging cable.

Imaxe: The Andoer D2 light wand shown alongside its USB Type-C charging cable, illustrating the charging setup.

Opcións de montaxe:

The Andoer D2 light wand can be used handheld for flexible lighting or mounted for stable positioning. It features a standard 1/4-inch screw hole at the bottom.

Imaxe: Un detallado view of the 1/4-inch screw hole located at the base of the light wand, demonstrating how it can be attached to a light stand or tripod for stable use. Note that the light stand/tripod is sold separately.

• Uso portátil: Simply hold the light wand to direct light as needed.
• Tripod/Light Stand Mounting: Screw the 1/4-inch thread at the bottom of the light wand onto a compatible tripod or light stand. Ensure it is securely fastened before use.

Instrucións de funcionamento

Encendido/apagado:

Manteña premido o Interruptor de alimentación botón para acender ou apagar a varilla da luz.

Axuste do brillo:

The light wand offers 12 levels of adjustable brightness. Use the Brillo + botón para aumentar o brillo e o Brillo - botón para diminuílo.

Imaxe: Illustration of the 12 levels of adjustable brightness, demonstrating the range from dim to bright light output.

Axuste da temperatura da cor (modo CCT):

In CCT mode, you can adjust the color temperature between 2500K (warm light), 5500K (neutral/daylight), and 8500K (cold light). Press the Selección de modo button to cycle to CCT mode, then use the Brillo + e Brillo - buttons to adjust the color temperature.

Imaxe: Visual representation of the adjustable color temperatures, ranging from warm (2500K) to neutral (5500K) to cool (8500K) light.

Activating Colorful Light Effects (RGB Mode):

The light wand features 7 colorful light effects: red, green, blue, orange, purple, light blue, and red & blue flash. Press the Selección de modo button to cycle through these RGB effects. Brightness can still be adjusted in these modes using the Brillo + e Brillo - botóns.

Imaxe: A visual guide to the 7 colorful light effects available, showcasing the vibrant range of colors the light wand can produce.

Cargando

The Andoer D2 light wand has a built-in 2600mAh rechargeable lithium battery. When the battery is low, the power indicator light will signal. To charge:

1. Connect the small end of the USB Type-C charging cable to the charging port on the light wand.
2. Connect the standard USB end of the cable to a USB power source (e.g., wall adapter, power bank, computer USB port).
3. The power indicator light will illuminate or change color to indicate charging. It will change again or turn off when fully charged.

A full charge provides approximately 2.5 hours of continuous use at maximum brightness.

Mantemento

• Clean the light wand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Garde o dispositivo nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
• If not used for extended periods, charge the battery every 3 months to maintain battery health.

Resolución de problemas

Especificacións

Garantía e Soporte

Andoer products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Andoer websitio. Garde o comprobante de compra para reclamacións de garantía.

Andoer Official Websitio: Andoer Store on Amazon