Introdución
This manual provides essential instructions for the installation, operation, and maintenance of your Aigo Rainbow Gaming PC Case. Please read this guide thoroughly before beginning the assembly process to ensure proper setup and to maximize the lifespan of your components.
Produto rematadoview
The Aigo Rainbow Gaming PC Case is designed to house your computer components, offering compatibility with various motherboard form factors and cooling solutions. It features a durable construction with an acrylic side panel for component visibility and efficient airflow.
Características principais:
- Factor de forma: ATX
- Soporte para placa base: ATX, M-ATX, ITX
- Portos de E/S frontales: 1 x USB 3.0, 2 x USB 2.0, Audio Jacks
- Panel Materials: SPCC Front Panel, Acrylic Side Panel
- Baías de condución: 2 x 2.5" SSD/HDD, 2 x 3.5" HDD
- Soporte de refrixeración:
- Rear Fan: 1 x 120mm (Fans not included)
- Water Cooler: Rear 120mm, Side 120mm
- Espazo libre dos compoñentes:
- Altura máxima do refrigerador da CPU: 160 mm
- Lonxitude máxima da GPU: 310 mm
- Iluminación: RGB (integrated into front panel design)
Figura 1: Fronte view of the Aigo Rainbow Gaming PC Case. This image displays the front panel with its brushed texture and the distinctive diagonal RGB lighting element.
Figura 2: En ángulo view of the Aigo Rainbow Gaming PC Case. This perspective highlights both the front panel design and the transparent acrylic side panel, allowing a view into the case interior.
Instrucións de configuración
Follow these steps to assemble your computer components within the Aigo Rainbow PC Case.
1. Prepare the Case:
- Coloque a caixa sobre unha superficie estable e plana.
- Carefully remove the acrylic side panel by unscrewing the four thumb screws located at each corner.
- Remove any internal packaging materials.
Figura 3: Lateral view of the Aigo Rainbow Gaming PC Case. This image shows the acrylic side panel, which can be removed for component installation.
2. Instalación da placa base:
- Instale a protección de E/S na abertura traseira da caixa.
- Align your ATX, M-ATX, or ITX motherboard with the standoffs inside the case.
- Secure the motherboard with appropriate screws.
3. Instalación da fonte de alimentación:
- Mount your power supply unit (PSU) into the designated bay, typically at the bottom rear of the case.
- Fixe a fonte de alimentación con parafusos na parte traseira da caixa.
4. Drive Installation (HDD/SSD):
- For 3.5" HDDs: Locate the 3.5" drive bays and slide the drives into place, securing them with screws or tool-less mechanisms if available.
- For 2.5" SSDs/HDDs: Mount the 2.5" drives onto the dedicated mounting points, typically behind the motherboard tray or in specific drive cages, and secure with screws.
5. Graphics Card (GPU) Installation:
- Retire as tapas das ranuras PCIe necesarias da parte traseira da caixa.
- Insira a tarxeta gráfica na ranura PCIe correspondente da placa base.
- Secure the graphics card to the case with screws. Ensure the GPU length does not exceed 310mm.
6. Cooling System Installation (Fans/Water Cooler):
- Fans: Install 120mm fans in the rear position as needed. Note that fans are not included with this case.
- Water Cooler: If using a water cooler, install a 120mm radiator in the rear or side mounting positions.
- Enfriador de CPU: Asegúrate de que a altura do teu refrigerador de CPU non supere os 160 mm.
7. Xestión de cables:
Route all power and data cables through the designated cutouts and tie-down points behind the motherboard tray to ensure clean aesthetics and optimal airflow.
8. Connect Front Panel Cables:
Connect the front panel cables (USB 3.0, USB 2.0, Audio, Power Switch, Reset Switch, HDD LED, Power LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.
Instrucións de funcionamento
Once all components are installed and cables are connected, replace the side panel and secure it with the thumb screws. Connect your peripherals (monitor, keyboard, mouse) and power cable to the power supply. Press the power button on the front panel to start your system.
The integrated RGB lighting on the front panel will illuminate upon system power-on. Specific control over the RGB lighting, if available, will depend on your motherboard's RGB software or any integrated controller within the case (check for a dedicated button on the front I/O if applicable, though not specified for this model).
Mantemento
Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.
- Limpeza do po: Periodically clean dust filters (if present) and the interior of the case using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
- Limpeza de paneis: Wipe the acrylic side panel and front panel with a soft, damp cloth. Avoid abrasive cleaners that may scratch the acrylic.
- Comprobación da xestión de cables: Comprobe ocasionalmente o cableado para asegurarse de que ningún cable obstrua o fluxo de aire ou o funcionamento do ventilador.
Resolución de problemas
- O sistema non se acende:
- Ensure the power supply is properly connected to the wall outlet and the PSU switch is in the 'ON' position.
- Verifique que todos os cables de alimentación da fonte de alimentación estean conectados correctamente á placa base e aos compoñentes.
- Check that the front panel power switch cable is correctly connected to the motherboard header.
- Sen saída de visualización:
- Confirm your monitor is connected to the graphics card (GPU) output, not the motherboard's integrated graphics output (unless you are using integrated graphics).
- Volva colocar a tarxeta gráfica na súa ranura PCIe.
- Problemas de sobrequecemento:
- Ensure all installed fans are spinning correctly.
- Verify proper airflow direction (intake/exhaust).
- Clean any dust buildup from fans and filters.
Especificacións
| Característica | Detalle |
|---|---|
| Marca | aigo |
| Nome do modelo | Aigo-Rainbow-Preto |
| Factor de forma de caso | ATX |
| Compatibilidade da placa base | ATX, M-ATX, ITX |
| Portos de E / S dianteiros | 1 x USB 3.0, 2 x USB 2.0, Audio |
| Material do panel frontal | SPCC |
| Material do panel lateral | Acrílico |
| Unidade Bays | 2 x 2.5" (SSD/HDD), 2 x 3.5" (HDD) |
| Supported Fans (Rear) | 1 x 120mm (Fans not included) |
| Supported Water Cooler | Rear: 120mm, Side: 120mm |
| Altura máxima do refrigerador da CPU | 160 mm |
| Lonxitude máxima da GPU | 310 mm |
| Dimensións do produto (H x P x W) | 50 x 47 x 26 cm |
| Chassis Dimensions (L x W x H) | 380 x 195 x 410 mm |
| Iluminación | RGB (Front Panel) |
Figure 4: Dimensions of the Aigo Rainbow Gaming PC Case. This diagram illustrates the overall measurements of the case.
Garantía e Soporte
This Aigo Rainbow Gaming PC Case comes with a 12 meses de garantía from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
Fabricante: Aigo Darkflash