Introdución
Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
Instrucións de seguridade importantes
- Desconecte a alimentación antes da instalación ou mantemento.
- This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltage requisitos.
- Do not expose the light to excessive moisture or extreme temperatures.
- Handle the LED board with care to avoid damage to components.
- Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
- Se non tes dúbidas, a instalación debe ser realizada por unha persoa cualificada.
Contido do paquete
- 1 x SAMCON SBE-C-1 DC LED Light with Switch
Produto rematadoview
The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.
Figura 1: Fronte view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.
Figura 2: Atrás view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.
Instrucións de instalación
- Prepare a superficie de montaxe: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
- Fixar a luz LED: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
- Conectar enerxía:
- Identify the positive (+) and negative (-) terminals of your DC power source.
- Conecta o fío vermello from the LED light to the terminal positivo (+) of your DC power source.
- Conecta o fío negro from the LED light to the terminal negativo (-). of your DC power source.
- Warning: Ensure correct polarity to prevent damage to the LED light.
- Verificar conexións: Comprobe dúas veces todas as conexións para asegurarse de que estean seguras e polarizadas correctamente.
Instrucións de funcionamento
- Encendido: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
- Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.
Mantemento
- Limpeza: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Inspección: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
- Xestión de calor: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | Sen fonte de alimentación | Check if the DC power source is active. |
| A luz non se acende | Polaridade do cableado incorrecta | Verify that the red wire is connected to positive (+) and the black wire to negative (-). |
| A luz non se acende | Interruptor defectuoso | Ensure the integrated switch is pressed to the ON position. |
| Luz parpadea | Fonte de alimentación inestable | Ensure a stable DC power source is used. |
| Luz parpadea | Conexións soltas | Comprobe e axuste todas as conexións dos cables. |
Especificacións
| Característica | Detalle |
|---|---|
| Marca | SAMCON |
| Modelo | SBE-C-1 |
| Tipo de luz | LED |
| Fonte de luz Wattage | 10 vatios |
| Característica especial | Eficiencia enerxética |
| Tipo de controlador | Pulsador |
| Cor | Branco |
| Compoñentes incluídos | Luz |
Garantía e Soporte
For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.