Franke FJO 624 XS 60cm Chimney Hood Instruction Manual

Introdución

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Franke FJO 624 XS 60cm Chimney Hood. Please read these instructions carefully before use and retain them for future reference.

Imaxe 1: Fronte view of the Franke FJO 624 XS 60cm Chimney Hood. This stainless steel appliance is designed for wall mounting above a cooking surface.

Información de seguridade

Siga sempre as precaucións de seguridade básicas ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica e lesións.

• Asegúrate de que a instalación eléctrica cumpra coa normativa local.
• Non permita que os nenos fagan funcionar o aparello.
• Limpar regularmente os filtros de graxa para evitar riscos de incendio.
• Non flamear baixo a campá extractora.
• Asegúrese de que a habitación teña unha ventilación axeitada cando se use a campá extractora simultaneamente con electrodomésticos de gas ou outros que queimen combustible.
• Desconecte o aparello da rede eléctrica principal antes de calquera limpeza ou mantemento.
• Do not use the hood if the power cord is damaged. Contact qualified personnel for repair.

Configuración e instalación

The Franke FJO 624 XS is a wall-mounted canopy hood. Proper installation is crucial for optimal performance and safety.

Dimensións e espazo libre

Refer to the following dimensions for installation planning:

• Overall Product Dimensions (Depth x Width x Height): 47 cm x 60 cm x 100 cm
• Ancho da base: 598-898 mm
• Base Depth: 471 mm
• Altura do corpo principal: 200 mm
• Filter Minimum Height: 515 mm
• Filter Maximum Height: 795 mm
• Aspiration Minimum Height: 420 mm
• Aspiration Maximum Height: 795 mm
• Chimney Section Width (top): 126 mm
• Chimney Section Depth (top): 81 mm
• Chimney Section Height (top part): 169 mm
• Chimney Section Depth (lower part): 167 mm
• Ducting Outlet Height: 402 mm (from top of main body)
• Hood Edge Thickness: 25.5 mm

• Tipo de montaxe: Soporte de parede.
• Altura recomendada: Ensure the hood is installed at the recommended distance above the cooking surface as per local safety regulations and the appliance manual (typically 65-75 cm for electric hobs and 75-85 cm for gas hobs).
• Canalización: This model supports ducted/vented operation. Connect the exhaust outlet to an external ventilation system using appropriate ducting.

Pasos de instalación (xerais)

1. Mark the drilling points on the wall according to the provided template or dimensions.
2. Perforar buratos e introducir tacos de parede.
3. Fixe o soporte de montaxe á parede.
4. Mount the hood body onto the bracket.
5. Connect the ducting to the exhaust outlet.
6. Install the chimney sections, ensuring they are securely fastened.
7. Conecte o aparello á fonte de alimentación principal.

Instrucións de funcionamento

The Franke FJO 624 XS chimney hood features push-button controls for easy operation.

Panel de control

The control panel is located on the front of the hood and consists of push buttons for various functions.

• Encendido/apagado: Press the main power button to turn the hood on or off.
• Selección de velocidade: The hood has 3 speed settings. Press the corresponding button (1, 2, or 3) to select the desired extraction power.
  • Velocidade 1: Low extraction for light cooking.
  • Velocidade 2: Medium extraction for general cooking.
  • Velocidade 3: High extraction for intense cooking or strong odors.
• Control de luz: Press the light button to turn the LED lights on or off. The hood is equipped with 2x4W LED lights.

For best results, turn on the hood a few minutes before cooking and leave it running for a few minutes after cooking to clear residual fumes.

Mantemento

Regular maintenance ensures the longevity and optimal performance of your chimney hood.

Limpeza dos filtros de graxa

The hood is equipped with mesh filters designed to trap grease particles. These filters should be cleaned regularly, typically every 2-4 weeks depending on usage.

1. Desconectar a enerxía: Always switch off and unplug the hood from the power supply before cleaning.
2. Eliminar filtros: Locate the filter release catches and carefully remove the mesh filters.
3. Limpar filtros: Wash the filters by hand in hot soapy water or in a dishwasher on a low-temperature cycle. Avoid using abrasive detergents.
4. Secar e volver instalar: Asegúrese de que os filtros estean completamente secos antes de volvelos instalar.

Limpeza do Exterior

Clean the stainless steel exterior with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid harsh chemicals or abrasive pads that can scratch the surface.

Replacing Lights

If a light bulb needs replacement, ensure the hood is disconnected from power. Replace with a bulb of the same type and wattage (2x4W LED).

Resolución de problemas

Antes de contactar co servizo de atención ao cliente, consulte os seguintes problemas e solucións comúns:

Especificacións

Detailed technical specifications for the Franke FJO 624 XS Chimney Hood:

Garantía e Soporte

For warranty information, please refer to the documentation provided with your purchase or contact Franke customer support. Keep your proof of purchase for any warranty claims.

For technical assistance, spare parts, or service, please contact your local Franke service center or authorized dealer. You may need to provide the model number (FJO 624 XS) and part number (320.0545.169) when seeking support.

You can find more information on the official Franke websitio: www.franke.com