Be Cool BC121TU2201F

Be Cool 121 cm Tower Fan User Manual

Model: BC121TU2201F

Introdución

Thank you for choosing the Be Cool 121 cm Tower Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and keep it for future reference.

Be Cool 121 cm Tower Fan, front view

Imaxe: Fronte view of the Be Cool 121 cm Tower Fan in white, showcasing its sleek design and tall profile.

Información importante de seguridade

Contido do paquete

Comprobe o contido do paquete ao abrilo para asegurarse de que todos os elementos estean presentes e non estean danados:

Configuración e montaxe

Follow these steps to assemble your Be Cool Tower Fan:

  1. Carefully remove all packaging materials from the fan unit and its components.
  2. Take the two halves of the base and align them. They should snap together or fit snugly.
  3. Place the main fan unit onto the assembled base, ensuring the alignment tabs or slots match.
  4. Secure the fan unit to the base using the provided screws. Typically, these are tightened from the underside of the base.
  5. Coloque o ventilador montado sobre unha superficie firme e nivelada.
  6. Insert the CR2430 battery into the remote control if not already pre-installed.
  7. Conecte o cable de alimentación a unha toma de corrente estándar (220 V).
Be Cool 121 cm Tower Fan, side view

Imaxe: Lateral view of the Be Cool Tower Fan, illustrating its slim profile and stable circular base.

Instrucións de funcionamento

Your Be Cool Tower Fan can be operated using the touch control panel on top of the unit or the included remote control.

Panel de control e pantalla LED

Close-up of Be Cool Tower Fan top control panel

Image: Close-up of the fan's top control panel, showing the touch buttons for Power, Speed, Timer, Oscillation, and Mode.

Close-up of Be Cool Tower Fan LED display

Imaxe: Detallada view of the fan's LED display, showing temperature, mode icons (Nature, Sleep), and oscillation indicator.

The LED display shows the current room temperature and active settings. The touch-sensitive buttons allow for easy control of all functions.

Control remoto

Be Cool Tower Fan remote control

Image: The remote control for the Be Cool Tower Fan, featuring buttons for Power, Speed, Oscillation, Ionizer, Timer, and Mode.

The remote control provides convenient access to all fan functions from a distance.

Mantemento

Un mantemento regular garante un rendemento óptimo e unha maior duración do teu ventilador.

Limpeza

Almacenamento

Cando non o use durante períodos prolongados, garde o ventilador nun lugar fresco e seco, preferiblemente na súa embalaxe orixinal, para protexelo do po e dos danos.

Resolución de problemas

Se tes problemas co teu ventilador, consulta os seguintes problemas e solucións comúns:

ProblemaCausa posibleSolución
O ventilador non se acende.No power supply; power cord not plugged in; power outlet faulty.Ensure the fan is properly plugged into a working electrical outlet. Check the circuit breaker.
Fluxo de aire débil.Fan speed set too low; air inlets/outlets blocked by dust.Increase the fan speed. Clean the air grilles as per maintenance instructions.
O ventilador fai un ruído estraño.Fan not on a stable surface; foreign object inside; internal component issue.Place the fan on a stable, flat surface. Unplug and check for any obstructions. If noise persists, contact customer support.
O control remoto non funciona.Battery depleted or incorrectly inserted; remote out of range.Replace the battery (CR2430). Ensure the remote is pointed towards the fan's receiver and within range.

If the problem persists after trying these solutions, please contact Be Cool customer support for assistance.

Especificacións

CaracterísticaDetalle
MarcaSexa cool
Número de modeloBC121TU2201F
CorBranco
Dimensións (produto)31.5P x 31.5L x 121A cm
Peso3.5 quilogramos
Poder45 vatios
Voltage220 V
MaterialPlástico
Número de velocidades3 (Baixo, Medio, Alto)
Características especiaisIonizer, LED Display, Oscillation, Timer (up to 12h), Remote Control
Tipo de controladorControl remoto, panel táctil
Fonte de enerxíaAlimentación da rede

Garantía e Soporte

Your Be Cool Tower Fan comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact Be Cool customer service through their official websitio web ou a información de contacto proporcionada no seu recibo de compra.