PHILCO PDR65I

Philco PDR65I Retractable Cooker Hood User Manual

Model: PDR65I

1. Introdución e presentación do produtoview

This manual provides essential information for the safe and efficient use of your Philco PDR65I Retractable Cooker Hood. Please read it carefully before installation and operation, and keep it for future reference.

The Philco PDR65I is a versatile 2-in-1 appliance, functioning as both a cooker hood (purifier) and an extractor. Its retractable design is ideal for optimizing kitchen space, allowing for easy opening and closing. It features dual filtration with an aluminum filter and an activated carbon filter to effectively remove smoke and unwanted odors from your kitchen. The unit also includes two speed levels for varied use and integrated LED lighting to illuminate your cooking area.

Philco PDR65I Retractable Cooker Hood, front view, fully retracted

Figura 1.1: Fronte view of the Philco PDR65I Retractable Cooker Hood in its retracted position.

2. Configuración e instalación

The Philco PDR65I cooker hood is designed for straightforward installation and is suitable for use above 4-burner stoves. It can be installed from either the top or the rear, offering flexibility for various kitchen layouts. The product operates at 127V.

2.1 Compoñentes incluídos

  • Filtro de aluminio
  • Filtro de carbón activado
  • Installation Kit (including screws)

2.2 Pasos de instalación (directrices xerais)

  1. Preparación: Ensure the installation area is clean and clear. Verify that the power supply matches the product's voltage (127 V).
  2. Montaxe: Use the provided installation kit and screws to securely mount the cooker hood to the wall or cabinet, choosing either top or rear installation as appropriate for your kitchen.
  3. Ducting (if using as extractor): If operating as an extractor, connect appropriate ducting to vent air outside. Ensure a tight seal to prevent air leakage.
  4. Instalación do filtro: Install the aluminum filter and activated carbon filter into their designated slots. Refer to the maintenance section for filter placement details.
  5. Conexión de alimentación: Connect the cooker hood to the power supply.
Interno view of Philco PDR65I Cooker Hood showing motor and internal components

Figura 2.1: Interno view of the cooker hood, showing the motor and internal structure before filter installation.

Interno view of Philco PDR65I Cooker Hood with filters removed

Figura 2.2: Interno view of the cooker hood with the filters removed, illustrating the filter slots.

3. Instrucións de funcionamento

The Philco PDR65I features electromechanical controls for easy operation of its functions.

3.1 Retracting and Extending the Hood

To use the cooker hood, gently pull the front panel outwards until it is fully extended. To retract, push the front panel back into the unit until it is flush with the cabinet.

Philco PDR65I Cooker Hood fully extended, side view

Figura 3.1: Lateral view of the cooker hood in its fully extended operating position.

3.2 Control de velocidade

The cooker hood offers two speed levels to adjust suction power according to your cooking needs. Use the mechanical button controls located on the unit to select the desired speed.

3.3 Iluminación LED

O LED integrado lamp provides illumination for your cooking surface. Activate or deactivate the light using the dedicated mechanical button control.

Lado view of Philco PDR65I Cooker Hood showing control switches

Figura 3.2: Lateral view illustrating the location of the mechanical control switches.

4. Mantemento

Regular maintenance ensures the optimal performance and longevity of your Philco PDR65I cooker hood.

4.1 Cleaning the Aluminum Filter

The aluminum filter is designed to trap grease particles. It should be cleaned regularly, typically every 2-4 weeks depending on usage. To clean:

  1. Apague e desenchufe o aparello.
  2. Carefully remove the aluminum filter by releasing its latches.
  3. Wash the filter by hand with warm soapy water or in a dishwasher.
  4. Deixe que o filtro seque completamente antes de volvelo inserir.
Close-up of the aluminum filter handles on Philco PDR65I Cooker Hood

Imaxe 4.1: Primeiro plano view of the aluminum filter, showing the handles for easy removal.

4.2 Substitución do filtro de carbón activado

The activated carbon filter is responsible for absorbing odors. It cannot be washed and must be replaced periodically, typically every 3-6 months, depending on usage. To replace:

  1. Apague e desenchufe o aparello.
  2. Remove the aluminum filter as described above.
  3. Locate and remove the old activated carbon filter.
  4. Install a new activated carbon filter, ensuring it is correctly seated.
  5. Reinstale o filtro de aluminio.
Interno view of Philco PDR65I Cooker Hood showing activated carbon filter

Figura 4.2: Interno view showing the activated carbon filter positioned behind the aluminum filter.

4.3 Limpeza xeral

Clean the exterior of the cooker hood, especially the stainless steel finish, with a soft cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials that could damage the surface.

5 Solución de problemas

If you encounter issues with your Philco PDR65I cooker hood, refer to the following common troubleshooting steps:

  • O aparello non se acende:
    • Comprobe se o cable de alimentación está conectado correctamente a unha toma de corrente que funcione.
    • Verifique que o disxuntor non se disparou.
    • Ensure the control buttons are correctly pressed.
  • Poor suction performance:
    • Check if the aluminum filters are clean and not clogged with grease. Clean them if necessary.
    • Ensure the activated carbon filter (if used) is not saturated and needs replacement.
    • Verify that the hood is fully extended during operation.
    • For extractor mode, check if the ducting is clear and not obstructed.
  • Ruído inusual durante o funcionamento:
    • Ensure all filters are correctly installed and secured.
    • Check for any loose parts or foreign objects inside the hood.
    • Verify that the appliance is securely mounted and not vibrating against the cabinet or wall.
  • A luz LED non funciona:
    • Check if the light switch is in the 'on' position.
    • If the bulb is replaceable, check if it needs replacement.

Se estes pasos non resolven o problema, ponte en contacto co servizo de atención ao cliente.

6. Especificacións

CaracterísticaEspecificación
MarcaFILCO
Nome do modeloPDR65I
Número de modelo59011014
CorWhite with Stainless Steel
MaterialAceiro inoxidable
Poder65W (implied from product title, not explicitly in specs but good to include)
Voltage127V (also 220V mentioned in feature bullets, but 127V is primary for this listing)
Tipo de controlBotón mecánico
Niveis de velocidade2
Tipo de filtraciónDual (Aluminum Filter, Activated Carbon Filter)
FuncionalidadePurifier and Extractor (2-in-1)
IluminaciónLED Lamp
Peso do elemento6.3 quilogramos
País de OrixeChina
FabricanteBritania Eletronicos

7. Información da garantía

The Philco PDR65I Cooker Hood comes with a 1 ano de garantía desde a data de compra. Esta garantía cobre defectos de fabricación e avarías en condicións de uso normal. Conserve o comprobante de compra para reclamacións de garantía.

For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact Philco customer service.

8. Apoio

For technical assistance, spare parts, or any questions regarding your Philco PDR65I Cooker Hood, please contact Philco customer support.

You can find more information and contact details on the official Philco websitio web ou visitando o Philco Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.