Aigo AC SE 360 Rainbow 360mm Water Cooler Instruction Manual

1. Introdución

Thank you for choosing the Aigo AC SE 360 Rainbow 360mm Water Cooler. This all-in-one liquid cooling solution is designed to provide efficient thermal management for your high-performance CPU, featuring a 360mm triple radiator and vibrant ARGB lighting. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your product.

Image 1.1: Aigo AC SE 360 Rainbow 360mm Water Cooler assembled view.

2. Información de seguridade

• Always disconnect power from your computer before installation or maintenance.
• Manexa os compoñentes con coidado para evitar danos.
• Asegurar a posta a terra adecuada para evitar riscos eléctricos.
• Manteña o produto lonxe da humidade e das temperaturas extremas.
• Do not attempt to open the pump or radiator, as this may void the warranty and cause leaks.
• Manter fóra do alcance dos nenos.

3. Contido do paquete

Verifique que todos os compoñentes que se indican a continuación estean presentes no seu paquete:

• 1x Aigo AC SE 360 Water Cooler Unit (Radiator, Pump/CPU Block, Tubing)
• 3 ventiladores ARGB de 120 mm
• Mounting Hardware for Intel Sockets (LGA 115X, 1200, 1700, 2011, 2066)
• Mounting Hardware for AMD Sockets (AM2, AM3, AM4, AM5)
• Pasta Térmica
• Parafusos do ventilador e parafusos do radiador
• ARGB Controller (if included with your specific model)

Image 3.1: All components included in the Aigo AC SE 360 package.

4. Configuración e instalación

Follow these steps for proper installation of your Aigo AC SE 360 Water Cooler:

1. Preparar a placa base: Install the appropriate backplate and standoffs for your CPU socket (Intel: 115X, 1200, 1700, 2011, 2066; AMD: AM2, AM3, AM4, AM5). Refer to your motherboard manual for specific instructions.
2. Aplicar pasta térmica: Clean the CPU surface. Apply a small amount of thermal paste to the center of the CPU IHS (Integrated Heat Spreader).
3. Mount the CPU Block/Pump: Carefully place the CPU block onto the CPU, aligning it with the standoffs. Secure it with the provided screws, tightening them in a diagonal pattern until snug. The magnetic block design allows for easy rotation to align the logo or tubing as desired.
4. Instalar ventiladores no radiador: Attach the three 120mm ARGB fans to the radiator using the longer screws provided. Ensure the fan airflow direction is correct for your case configuration (typically blowing air through the radiator).
5. Montar o radiador: Install the radiator assembly into your PC case. The 360mm radiator is compatible with most ATX cases that support this size. Secure it with the appropriate screws.
6. Connect Fans (Daisy Chain): The fans feature a daisy chain connection system. Connect the fans to each other in series, then connect the final fan's cable to the motherboard's fan header or an ARGB controller. This simplifies cable management by reducing the number of cables.
7. Conectar a iluminación ARGB: Connect the ARGB cables from the fans and pump to a 3-pin, 5V ARGB header on your motherboard or a dedicated ARGB controller. Ensure the voltage is correct (5V) to prevent damage.
8. Conectar a alimentación da bomba: Connect the pump's 4-pin power connector to a dedicated AIO_PUMP or CPU_FAN header on your motherboard.
9. Xestión de cables Organize all cables neatly to ensure proper airflow and a clean build.

5. Instrucións de funcionamento

Once installed, the Aigo AC SE 360 Water Cooler operates automatically to maintain optimal CPU temperatures. Here are key operational aspects:

• Refrixeración automática: The pump and fans will adjust their speed based on CPU temperature, ensuring efficient cooling. The pump operates at 12V with 3200 RPM, and fans operate between 800-1800 RPM.
• Control de iluminación ARGB: The Rainbow ARGB lighting can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through an included ARGB controller. This allows for various lighting effects and synchronization with other ARGB components.
• Nivel de ruído: The cooler is designed for quiet operation, with a noise level of approximately 30 dB.

6. Mantemento

Regular maintenance helps ensure the longevity and performance of your water cooler:

• Limpeza do po: Limpa periodicamente as aletas do radiador e as aspas do ventilador para evitar a acumulación de po, que pode dificultar o fluxo de aire e o rendemento da refrixeración. Usa aire comprimido ou un cepillo suave.
• Inspeccionar tubos: Comprobe se a tubaxe presenta algún sinal de dobras, fugas ou danos.
• Monitorización de temperaturas: Usa software de monitorización para vixiar as temperaturas da CPU. Os aumentos significativos poden indicar a necesidade dunha inspección ou limpeza adicional.
• Pasta térmica: While not frequently required, reapplying thermal paste every few years can help maintain optimal thermal transfer.

7 Solución de problemas

If you encounter issues with your Aigo AC SE 360 Water Cooler, refer to the following common problems and solutions:

8. Especificacións

9. Garantía e soporte

The Aigo AC SE 360 Water Cooler comes with a 12 meses de garantía desde a data de compra. Esta garantía cobre defectos de fabricación en condicións de uso normais.

For technical support, warranty claims, or any questions not covered in this manual, please contact your retailer or the Aigo customer support team. Please have your proof of purchase and product model number (ACSE360) ready when contacting support.