Manual do usuario da pistola de cola quente sen fíos WORKPRO de 3.6 V

1. Introdución

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and retain it for future reference.

This cordless hot glue gun is designed for various crafting and DIY projects, offering fast heating, energy efficiency, and portability. It is suitable for use with materials such as plastics, wood, paper products, textiles, and shells.

2. Produto rematadoview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun.

Figura 2.1: Labeled components of the WORKPRO Cordless Hot Glue Gun, including Nozzle, ON/OFF Switch, Glue Stick insertion point, LED Indicator, Trigger Lever, Type-C Cable, Retractable Stand-up Base, and Type-C Charging Port.

• Boquilla: Dispenses melted glue.
• Interruptor ON / OFF: Acende ou apaga o dispositivo.
• Glue Stick Insertion Point: Where glue sticks are loaded.
• Indicador LED: Displays heating status and battery charge level.
• Palanca de disparo: Activates glue dispensing.
• Cable tipo C: Para cargar a batería interna.
• Retractable Stand-up Base: Provides stability when the glue gun is not in use.
• Porto de carga tipo C: Conecta o cable de carga.

3. Que está incluído

The WORKPRO 3.6V Cordless Hot Glue Gun kit typically includes the following items:

• WORKPRO 3.6V Cordless Hot Glue Gun (Model: W125235)
• 20 Pcs Mini Glue Sticks (0.27" Dia)
• Cable de carga tipo C
• Built-in Lithium Ion Battery (2500mAh)

Figura 3.1: The WORKPRO Cordless Hot Glue Gun and included glue sticks.

4. Información de seguridade

ADVERTENCIA: Lea todas as advertencias e instrucións de seguridade. O incumprimento das advertencias e instrucións pode producir descargas eléctricas, incendios e/ou lesións graves.

• Always wear appropriate personal protective equipment, such as safety glasses, when operating the glue gun.
• The nozzle and melted glue become very hot. Avoid direct contact with skin to prevent burns.
• Do not touch the nozzle or melted glue immediately after use. Allow the tool to cool completely.
• Asegúrese de que a zona de traballo estea ben ventilada.
• Do not leave the hot glue gun unattended while it is on or heating.
• Mantéñase fóra do alcance dos nenos. Isto non é un xoguete.
• Use only glue sticks of the specified diameter (0.27" / 7mm).
• Do not pull out the melting glue stick from the glue gun after work is finished. Keep it inside for next use.
• The glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.
• Non mergulles a pistola de cola en auga nin noutros líquidos.
• Do not use the glue gun in damp ou condicións húmidas.
• Only use the provided Type-C charging cable or a compatible 5V 1A input charger.

5. Configuración

5.1 Charging the Glue Gun

Before first use, fully charge the glue gun. The 2500mAh lithium battery provides long-lasting power.

1. Connect the provided Type-C charging cable to the Type-C Charging Port on the glue gun.
2. Connect the other end of the cable to a 5V 1A power source, such as a power bank, computer USB socket, or car USB socket.
3. The LED Indicator will show the charging status. A red light indicates charging, and a green light indicates a full charge.

Figura 5.1: Charging the glue gun via a Type-C cable. The LED indicator shows charging status.

5.2 Inserting a Glue Stick

Ensure the glue gun is off before inserting a new glue stick.

1. Insert a 0.27" (7mm) diameter mini glue stick into the Glue Stick Insertion Point at the rear of the gun.
2. Push the glue stick in until it stops. Do not force it.

Figura 5.2: Step 1 of operation: Inserting a glue stick.

6. Instrucións de funcionamento

6.1 Acendido e quecemento

1. Press and hold the ON/OFF Switch for 3 seconds to turn on the glue gun. The LED Indicator will light up red, indicating it is heating.
2. Allow approximately 90 seconds for the glue gun to preheat. The LED Indicator will change from red to green when it is ready for use.

Figura 6.1: The glue gun heating process, showing the red LED indicator and the 90-second heating time.

Figura 6.2: Visual guide for operating the glue gun, from inserting the stick to pulling the trigger.

6.2 Aplicación de cola

Once the LED Indicator is green, the glue gun is ready to dispense glue.

1. Position the nozzle close to the surface where glue is needed.
2. Gently pull the Trigger Lever to dispense melted glue. The glue gun has a fast glue output of 0.14 oz/min.
3. Solte o gatillo para deter o fluxo de cola.
4. The less-drip nozzle design helps reduce glue spillage.

Figura 6.3: Comparison showing the superior glue output and clarity of the WORKPRO glue gun.

6.3 Automatic Safety Power-Off

For safety and energy saving, the glue gun will automatically power off if not used for 8 minutes. To resume operation, simply press the ON/OFF switch again.

7. Mantemento

• Limpeza: Ensure the glue gun is completely cool before cleaning. Use a dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
• Almacenamento: Store the glue gun in a cool, dry place, away from direct sunlight and moisture. Ensure it is fully charged before long-term storage.
• Barras de cola: Do not remove a partially used glue stick from the gun. Leave it in for the next use to prevent damage to the feeding mechanism.

8 Solución de problemas

9. Especificacións

• Modelo: W125235
• Voltage: 3.6 voltios
• Wattage: 9 vatios
• Batería: Ión de litio de 2500 mAh (incluída)
• Entrada de carga: 5V 1A (Type-C)
• Tempo de quecemento: Aproximadamente 90 segundos
• Saída de cola: ≥0.14 oz/min
• Diámetro de barra de cola compatible: 0.27 polgadas (7 mm)
• Apagado automático: 8 minutos de inactividade
• Peso do artigo: 1.1 libras
• Dimensións: 8.11 x 7.52 x 2.13 polgadas (dimensións do paquete)
• Materiais compatibles: Wood, Ceramic, Metal, Stone, Plastics, Paper products, Textiles, Shells
• UPC: 820909689782

Figura 9.1: Key dimensions of the WORKPRO Cordless Hot Glue Gun.

10. Vídeos oficiais de produtos

Neste momento non hai vídeos de produtos oficiais creados polo vendedor dispoñibles para a súa inserción.

11. Garantía e soporte

For warranty information or technical support, please contact WORKPRO customer service. Refer to the product packaging or the official WORKPRO websitio para os detalles de contacto.

Websitio: www.workprotools.com