BISSELL SpotClean Auto Pro Select 3730N User Manual

1. Produto rematadoview

The BISSELL SpotClean Auto Pro Select 3730N is a powerful spot cleaner designed for deep cleaning of soft surfaces such as textiles, sofas, beds, car interiors, carpets, and rugs. It features a dual-tank system that keeps clean water separate from dirty water, ensuring effective cleaning results.

2. Configuración e montaxe

Before first use, ensure all components are present and undamaged. Refer to the packaging for a complete list of contents.

1. Desempaquetar a unidade: Carefully remove the SpotClean Auto Pro Select from its packaging.
2. Attach Hose and Tools: Connect the flexible hose to the main unit. Attach the desired cleaning tool (e.g., the large stain tool or crevice tool) to the end of the hose.
3. Enche o depósito de auga limpa:
   • Retire o depósito de auga limpa da unidade.
   • Unscrew the cap and fill the tank with warm tap water (up to 60°C/140°F) and the recommended BISSELL cleaning formula. Do not use boiling water.
   • Volva colocar a tapa de forma segura e insira o depósito na unidade.
4. Position the Dirty Water Tank: Ensure the dirty water collection tank is correctly seated in its designated slot.

3. Instrucións de funcionamento

Follow these steps for effective spot cleaning:

1. Pretratamento (opcional): For tough stains, pre-treat the area with a suitable cleaning solution according to the solution's instructions.
2. Conectar: Enchufe o cable de alimentación a unha toma eléctrica conectada a terra.
3. Encendido: Acende a unidade usando o interruptor de acendido.
4. Limpar a zona:
   • Hold the cleaning tool firmly against the soiled surface.
   • Press the spray trigger to dispense cleaning solution while pulling the tool slowly over the stain.
   • Release the spray trigger and pull the tool slowly over the same area to suction up the dirty solution. Repeat until the area is clean and no more dirty water is being extracted.
   • For best results, make several dry passes to remove as much moisture as possible.

4. Mantemento e coidados

Regular maintenance ensures optimal performance and longevity of your SpotClean Auto Pro Select.

1. Baleirar e enxaugar o depósito de auga sucia: After each use, remove the dirty water tank, empty its contents, and rinse thoroughly with clean water.
2. Enxágüe o depósito de auga limpa: Se queda algunha solución, baleira e enxágüe o depósito de auga limpa.
3. Clean Tools and Hose: Rinse the cleaning tools under running water. For the hose, you can suction clean water through it to flush out any residue.
4. Unidade de limpeza: Limpe o exterior da unidade cun suave, damp pano.
5. Almacenar correctamente: Store the unit in a dry, protected area. Ensure the hose and tools are neatly stored on the unit.

5 Solución de problemas

If you encounter issues with your SpotClean Auto Pro Select, refer to the following common problems and solutions:

6. Especificacións

7. Garantía e soporte

For warranty information, product registration, or further assistance, please visit the official BISSELL website or contact their customer support. Keep your purchase receipt as proof of purchase.

Soporte en liña: www.bissell.com