Rosewill CMG5 1000W Modular Power Supply User Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your Rosewill CMG5 1000W Modular Power Supply. Please read this manual thoroughly before installation and retain it for future reference.

The Rosewill CMG5 1000W is a fully modular 80 PLUS Gold certified power supply designed for personal computers. It is compatible with ATX 3.0 & 3.1 standards and features a native 600W PCIe 5.0 / Gen 5 12+4 Pin 12V-2x6 cable, supporting modern high-performance graphics cards.

Imaxe: Fronte view of the Rosewill CMG5 1000W Modular Power Supply, showing the fan grille and branding.

2. Información de seguridade

WARNING: Improper installation or use can lead to serious injury or equipment damage. Always follow these safety guidelines:

• Asegúrese de que a fonte de alimentación estea desconectada da toma de corrente alterna antes da instalación ou manipulación.
• Non abra a fonte de alimentación. Alto volumetagHai pezas no interior e non hai pezas que o usuario poida reparar.
• Install the power supply in a well-ventilated area. Do not block any ventilation openings.
• Use only the modular cables provided with this power supply. Using incompatible cables can damage the PSU and connected components.
• Ensure all cable connections are secure and fully seated to prevent electrical shorts or overheating.
• Evite expoñer a fonte de alimentación á humidade ou a temperaturas extremas.
• If the power supply emits smoke, unusual odors, or loud noises, immediately disconnect it from the AC power and contact support.

3. Contido do paquete

Verifica que todos os elementos estean presentes no teu paquete:

• Rosewill CMG5 1000W Modular Power Supply Unit
• Cable de alimentación de CA
• Modular Cable Set (see below for details)
• Parafusos de montaxe
• Manual de usuario (este documento)

Image: Rear panel of the Rosewill CMG5 1000W Power Supply showing the modular cable connection ports labeled for MB, CPU, PERIF/SATA, PCI-E 5.0, and PCI-E.

Conxunto de cables modulares:

Image: Diagram illustrating the types and lengths of modular cables included with the Rosewill CMG5 1000W Power Supply, including 24-pin Motherboard, 12+4-pin PCIe 5.0, 4+4-pin CPU, 6+2-pin PCIe, SATA, and 4-pin Molex connectors.

• 1x 24-pin Motherboard Cable (600mm)
• 1x 12+4-pin PCIe 5.0 Cable (600mm)
• 2x 4+4-pin CPU Cables (700mm each)
• 4x 6+2-pin PCIe Cables (500mm each, with two connectors per cable)
• 2x SATA Cables (500mm, with four SATA connectors per cable)
• 1x 4-pin Molex Cable (500mm, with four Molex connectors)

4. Configuración e instalación

Follow these steps to install your Rosewill CMG5 1000W Power Supply:

1. Prepara o teu sistema:
   • Apague o ordenador e desconecte o cable de alimentación CA da toma de corrente.
   • Abre a carcasa do teu ordenador.
   • If replacing an existing power supply, disconnect all cables from the old PSU and remove it from the case.
2. Install the Power Supply:
   • Carefully place the new Rosewill CMG5 1000W PSU into the power supply bay of your computer case.
   • Secure the PSU to the case using the provided mounting screws. Ensure the fan is facing the correct direction for optimal airflow (typically facing down if there's a bottom vent, or up if not).
3. Conectar cables modulares:
   • Identify the necessary cables for your components (Motherboard, CPU, PCIe, SATA, Molex). Refer to the "Package Contents" section for cable types.
   • Connect the required modular cables to the corresponding ports on the power supply unit. Ensure they click firmly into place.
   • Connect the other end of each cable to your motherboard, CPU, graphics card(s), storage drives, and other peripherals. Pay close attention to the orientation of each connector.
   • For PCIe 5.0 graphics cards, use the dedicated 12+4-pin PCIe 5.0 cable. Ensure it is fully inserted into both the PSU and the graphics card.
4. Comprobacións finais:
   • Double-check all cable connections to ensure they are secure. Loose connections can cause system instability or damage.
   • Organize cables to improve airflow within the case.
   • Pecha a caixa do ordenador.
5. Encendido:
   • Conecte o cable de alimentación de CA á fonte de alimentación e despois a unha toma de parede.
   • Flip the main power switch on the back of the PSU to the "ON" position.
   • Acende o teu ordenador.

Imaxe: Traseira view of the Rosewill CMG5 1000W Power Supply, showing the AC power input, main power switch, and an "ECO" mode switch.

5. Instrucións de funcionamento

The Rosewill CMG5 1000W Power Supply is designed for reliable and efficient operation.

Eco Silent Mode:

• The power supply features an "ECO" mode switch located on the rear panel.
• When the ECO mode is ON, the 120mm Fluid Dynamic Bearing (FDB) fan will operate in a semi-fanless mode. The fan will remain off under low to moderate loads, providing silent operation. It will automatically spin up when the load increases to maintain optimal temperatures.
• When the ECO mode is DESACTIVADO, the fan will operate continuously, adjusting its speed based on the internal temperature and load.
• Choose the mode that best suits your preference for noise levels and cooling performance.

Power Excursion Capabilities:

This power supply is designed to handle power excursions up to 235% and GPU power excursions up to 300%, ensuring stable power delivery during peak demands from high-performance components.

6. Mantemento

Un mantemento axeitado garante a lonxevidade e o rendemento óptimo da súa fonte de alimentación.

• Limpeza: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components. Ensure the PSU is powered off and unplugged before cleaning.
• Xestión de cables Ensure cables are not obstructing airflow within your computer case. Re-route or tie cables as needed to maintain good ventilation.
• Condicións ambientais: Operate the power supply in a clean, dry environment with adequate ventilation. Avoid extreme temperatures and humidity.

7 Solución de problemas

Se tes problemas coa fonte de alimentación, consulta os seguintes problemas e solucións comúns:

8. Especificacións

Imaxe: Lateral view of the Rosewill CMG5 1000W Power Supply, displaying the electrical specifications label including AC input, DC output voltages, and total output power.

9. Garantía e soporte

Información da garantía:

The Rosewill CMG5 1000W Power Supply comes with a 5 anos de garantía do fabricanteEsta garantía cobre defectos de materiais e fabricación en condicións normais de uso. Conserve o comprobante de compra para reclamacións de garantía.

For detailed warranty terms and conditions, please refer to the official Rosewill websitio ou póñase en contacto co seu servizo de atención ao cliente.

Atención ao cliente:

If you have any questions, require technical assistance, or need to initiate a warranty claim, please contact Rosewill customer support:

• Websitio: Visit the official Rosewill websitio web con recursos de asistencia, preguntas frecuentes e información de contacto.
• Correo electrónico/Teléfono: Refer to the Rosewill websitio web para obter os datos de contacto máis actuais.

When contacting support, please have your product model (CMG1000G5) and proof of purchase readily available.