Manual de instrucións do quentador de auga instantáneo electrónico CLAGE CEX-U

1. Introdución

Thank you for choosing the CLAGE CEX-U Electronic Instantaneous Water Heater. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your appliance. Please read these instructions carefully before installation and use, and keep them for future reference.

The CLAGE CEX-U is an electronically controlled instantaneous water heater designed for under-sink mounting in kitchens, providing hot water precisely when needed. Its compact design and accurate temperature selection ensure comfort and efficiency.

2. Instrucións de seguridade

Importante: O incumprimento destas instrucións de seguridade pode provocar descargas eléctricas, incendios ou lesións persoais.

• Instalación profesional necesaria: The installation of this non-plug-in device must be carried out by a qualified electrician or a registered specialist in accordance with local regulations and wiring rules.
• Conexión eléctrica: Ensure the electrical supply matches the specifications of the appliance (400 V, 11-13.5 kW). The device must be properly grounded.
• Conexión de auga: All water connections must be performed by a qualified plumber. Ensure all connections are watertight to prevent leaks.
• Temperatura de funcionamento: The water heater delivers hot water up to 60°C. Exercise caution to prevent scalding, especially with children or individuals with reduced physical, sensory, or mental capabilities.
• Mantemento: Desconecte a fonte de alimentación antes de realizar calquera mantemento ou limpeza.
• Danos: Do not operate the appliance if it is damaged. Contact a qualified technician for repair.

3. Produto rematadoview

The CLAGE CEX-U is an advanced electronic instantaneous water heater designed for efficient hot water supply.

Características principais:

• Electronically regulated for precise temperature control.
• Pressure-resistant design, compatible with both pressure-resistant and pressure-free fittings.
• Compact dimensions for easy under-sink installation.
• Sensor button control panel with LED display for accurate temperature input between 20°C and 60°C.
• Suitable for reheating pre-heated water, such as from a solar system.
• Smart Control via Smartphone App (Special Feature).

Figura 1: Fronte view of the CLAGE CEX-U Electronic Instantaneous Water Heater, showing the LED display and sensor control buttons.

4. Configuración e instalación

Installation of the CLAGE CEX-U must be performed by a qualified professional. This section provides general guidance.

4.1 Localización de montaxe

The unit is designed for under-sink mounting. Ensure there is sufficient space for the appliance and its connections. The compact dimensions (approximately 31 x 31 x 11 cm) allow for installation under most kitchen sinks.

Figura 2: The CLAGE CEX-U installed under a kitchen sink, illustrating its compact size (approx. 29.4 cm height, 17.7 cm width, 10.4 cm depth) and external 10 cm water connections. The image also indicates "Made in Germany".

4.2 Electrical Connection (400 V)

The appliance requires a 400 V, 3-phase electrical supply. The power setting (11 kW or 13.5 kW) is adjustable during installation. A power cable (approx. 65 cm) for a 3-phase cooker connection box is included. This connection must be made by a qualified electrician.

4.3 Conexión de auga

The CLAGE CEX-U is suitable for both pressure-resistant and pressure-free fittings. The external water connections are designed for easy installation.

Figura 3: Installation diagram showing two configurations for the CLAGE CEX-U with a 400 V power supply. The left diagram illustrates standard installation with a pressure-free fitting. The right diagram shows installation with a pressure-resistant fitting, including a T-piece and pressure hose (supplied). Both diagrams emphasize professional installation.

Figura 4: The CLAGE CEX-U installed discreetly under a kitchen sink, demonstrating its space-saving design. The image highlights features such as desired temperature setting via sensor buttons, no mixing with cold water, a large LED display, instant hot water without waiting, and an optional remote control.

5. Instrucións de funcionamento

The CLAGE CEX-U features an intuitive sensor button control panel with an LED display.

5.1 Selección da temperatura

1. Asegúrate de que o aparello estea acendido.
2. Usa o + e - sensor buttons on the control panel to adjust the desired water temperature. The LED display will show the selected temperature.
3. The temperature can be set accurately between 20°C and 60°C.
4. Once the desired temperature is set, open the hot water tap. The unit will instantly heat the water to the selected temperature.

5.2 Smart Control (Optional)

If your model includes the Smart Control feature, you can manage settings via a smartphone application. Refer to the separate Smart Control manual or app instructions for detailed usage.

6. Mantemento

Regular maintenance ensures the longevity and efficient operation of your water heater. Always disconnect the power supply before performing any maintenance.

6.1 Limpeza do exterior

• Limpar o exterior casing cun suave, damp pano.
• Non empregues produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar a superficie.

6.2 Descalcificación

In areas with hard water, limescale can build up inside the appliance, affecting performance. Descaling should be performed by a qualified technician. The frequency depends on water hardness and usage.

6.3 Inspección xeral

Periodically check for any signs of leaks or unusual noises. If any issues are detected, contact a qualified service technician immediately.

7 Solución de problemas

Antes de contactar co servizo de atención ao cliente, comproba os seguintes problemas comúns:

For issues not listed here or if solutions do not resolve the problem, please contact CLAGE customer support or a qualified service technician.

8. Especificacións

Detailed technical specifications for the CLAGE CEX-U Electronic Instantaneous Water Heater.

9. Garantía e soporte

For warranty information, technical support, or service requests, please refer to the warranty card included with your product or visit the official CLAGE website. Ensure you have your model number (CEX-U, 2400-26413) and purchase date available when contacting support.

Visit CLAGE Official Websitio