BBAUER AC Power Cord Cable

BBAUER AC Power Cord Cable Instruction Manual

For Blackweb BWD19AAS10 & BWD19AAS11 Party Speakers

Introdución

This manual provides essential instructions for the safe and effective use of your BBAUER AC Power Cord Cable, designed for Blackweb BWD19AAS10 and BWD19AAS11 Party Speakers. Please read this manual thoroughly before use and retain it for future reference.

Produto rematadoview

BBAUER AC Power Cord Cable

Image showing the BBAUER AC Power Cord Cable with a two-prong plug on one end and a figure-8 connector on the other, suitable for connecting to compatible devices.

The BBAUER AC Power Cord Cable serves as a replacement or spare power supply cable specifically for Blackweb BWD19AAS10 and BWD19AAS11 Party Speaker models. It ensures proper and reliable power delivery to your audio device.

Configuración

Follow these steps to correctly connect your BBAUER AC Power Cord Cable:

  1. Identify the Power Port: Locate the AC power input port on your Blackweb BWD19AAS10 or BWD19AAS11 Party Speaker. This port is typically a figure-8 (C7) type connector.
  2. Conectar ao altofalante: Insert the figure-8 end of the BBAUER AC Power Cord Cable firmly into the power input port of your speaker. Ensure a snug and secure fit.
  3. Conectar á toma de corrente: Insert the two-prong plug end of the power cord into a standard, grounded AC wall outlet (100-240V, 50/60Hz).
  4. Verificar a conexión: Confirm that both ends of the cable are securely connected before attempting to power on your speaker.

En funcionamento

Once the BBAUER AC Power Cord Cable is correctly connected to both the Blackweb Party Speaker and a functional power outlet, the speaker is ready to receive electrical power. Proceed to turn on your speaker using its dedicated power button or switch.

Nota importante de seguridade:

  • Always ensure the power cord is free from kinks, severe bends, damage, or obstructions during operation to prevent overheating or electrical hazards.
  • Do not attempt to modify the power cord or use it with incompatible devices.

Mantemento

Proper care and maintenance will extend the life of your power cord:

  • Limpeza: Always disconnect the power cord from both the wall outlet and the speaker before cleaning. Wipe the cable with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the insulation.
  • Almacenamento: When not in use, store the power cord in a cool, dry place, away from direct sunlight, excessive heat, and extreme cold. Avoid tightly coiling or bending the cable sharply, which can cause internal wire damage.
  • Inspección: Periodically inspect the entire length of the power cord for any signs of wear, cuts, fraying, exposed wires, or damage to the insulation or connectors. If any damage is observed, discontinue use immediately and replace the cable with a new, compatible one.

Resolución de problemas

If you encounter issues with your power cord, consider the following:

Speaker Does Not Power On

  • Comproba as conexións: Ensure both ends of the BBAUER AC Power Cord Cable are securely plugged into the speaker's power input and a live wall outlet.
  • Verificar a toma de corrente: Test the wall outlet with another known working device (e.g., a lamp) to confirm it is supplying power.
  • Inspeccionar o cable: Carefully examine the power cord for any visible damage such as cuts, kinks, or frayed wires. A damaged cable should not be used and must be replaced.
  • Botón de encendido do altofalante: Ensure the speaker's own power button or switch is pressed or toggled to the "ON" position.

Intermittent Power to Speaker

  • Conexións seguras: Disconnect and then firmly re-seat both ends of the power cord to ensure a stable connection.
  • Danos no cable: Inspect the cable for any signs of internal or external damage that might cause intermittent electrical contact. Replace the cable if any damage is suspected.

Especificacións

CaracterísticaDetalle
Tipo de produtoAC Power Cord Cable
MarcaBBAUER
Device Connector TypeFigure-8 (IEC C7)
Wall Connector Type2-Prong US Standard (NEMA 1-15P)
CompatibilidadeNegroweb BWD19AAS10, Blackweb BWD19AAS11 Party Speakers
Vol. De entradatage Alcance100-240V AC
Frecuencia50/60 Hz

Garantía e Soporte

For information regarding warranty coverage or technical support for your BBAUER AC Power Cord Cable, please refer to any documentation provided with your purchase or contact the manufacturer directly. Specific warranty details for this accessory may vary and are typically separate from the warranty of the Blackweb Party Speaker itself.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.