WORKPRO W130016A

WORKPRO LED Work Light (Model W130016A) Instruction Manual

Introdución

Thank you for choosing the WORKPRO LED Work Light (Model W130016A). This versatile and durable work light is designed to provide bright, reliable illumination for a wide range of tasks and environments. Featuring multiple light modes, a rotatable stand, strong magnetic base, and power bank functionality, it is an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before use to ensure proper operation and maintenance.

Two blue WORKPRO LED Work Lights, one facing forward and one angled, showcasing o seu deseño compacto.

Figure 1: WORKPRO LED Work Light (Model W130016A)

Características do produto

  • Catro modos de luz: High, Medium, Low, and Flashing modes to suit various lighting requirements.
  • Soporte xiratorio de 180°: Adjustable stand with 7 locking positions allows for precise light angle adjustment.
  • Rechargeable & Power Bank Function: Equipped with two built-in 3.7V, 2000mAh batteries. Features a Type-C input for charging the light and a USB-A output to function as a power bank for other devices.
  • Base magnética forte: Four N42 magnets on the back allow secure attachment to metal surfaces, providing hands-free operation.
  • Construción duradeira: Made from Acrylonitrile Butadiene Styrene (ABS) and metal with TPR soft rubber for corrosion, wear, and impact resistance.
  • Impermeable e resistente aos golpes: Designed to withstand challenging environments, passing high and low temperature tests.
Graphic showing the WORKPRO LED Work Light with icons for 4 Light Modes, Rechargeable Design, 180° Adjustable Bracket, 4 N42 Magnets, and Waterproof features.

Figura 2: Características principaisview

Configuración e carga

Cargo Inicial

Before first use, fully charge the WORKPRO LED Work Light. Connect the provided Type-C charging cable to the light's input port and to a compatible USB power adapter (not included). The charging indicator light will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.

Función Power Bank

To use the work light as a power bank, open the protective cover on the back of the light. Connect your device's charging cable to the USB-A output port on the work light. The output indicator light will show blue when charging an external device.

Close-up of the back of the WORKPRO LED Work Light showing the Type-C input, USB output, and power button, with a phone connected for charging.

Figure 3: Charging Ports and Power Bank Function

WORKPRO LED Work Light charging a smartphone on an outdoor table, demonstrating its power bank capability.

Figure 4: Power Bank in Use

Instrucións de funcionamento

Encendido/apagado e selección de modo

Locate the power button on the back of the work light. Press the button once to turn the light on to the High brightness mode. Subsequent presses will cycle through the modes in the following order: High > Medium > Low > Flashing. To turn the light off, press and hold the power button for 2 seconds, or cycle through all modes until the light turns off.

Graphic illustrating the four light modes: High Brightness (2000 Lumen, 2 hours), Medium Brightness (1000 Lumen, 3 hours), Low Brightness (300 Lumen, 8 hours), and Flashing mode. Also shows the turn-off method.

Figure 5: Light Modes and Operation

Adjusting the Stand and Magnetic Mounting

The integrated stand can be rotated 180° and features 7 adjustable locking positions. Adjust the stand to direct the light as needed. For hands-free use, utilize the four N42 magnets on the back of the light to attach it securely to any metal surface.

Image showing the WORKPRO LED Work Light's dimensions and its 180° rotatable stand with multiple adjustable angles.

Figure 6: Adjustable Bracket

Image showing the WORKPRO LED Work Light magnetically attached to a metal shelf in a warehouse, providing hands-free illumination.

Figure 7: Magnetic Mounting in Use

Mantemento

  • Limpeza: Limpe a luz cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
  • Almacenamento: Store the light in a cool, dry place away from direct sunlight when not in use for extended periods. Ensure the protective cover for the charging ports is securely closed.
  • Coidado da batería: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light regularly, even if not in active use.

Resolución de problemas

ProblemaCausa posibleSolución
A luz non acende.Low battery or power button issue.Charge the light fully. Ensure the power button is pressed correctly.
A saída de luz é débil.Batería baixa ou modo incorrecto.Recharge the light. Cycle through modes to select a brighter setting.
Non se pode cargar o dispositivo externo.Work light battery is low or cable issue.Ensure the work light is sufficiently charged. Try a different USB cable.

Se os problemas persisten, póñase en contacto co servizo de atención ao cliente.

Especificacións

  • Modelo: W130016A
  • Fonte de luz: LED COB
  • Brillo: Up to 2000 Lumens (High Mode)
  • Modos de luz: High, Medium, Low, Flashing
  • Batería: 2 x 3.7V, 2000mAh Lithium-Ion (4000mAh total)
  • Porto de carga de entrada: Type-C (5V, 2A)
  • Porto de carga de saída: USB-A (5V, 1A)
  • Horario de traballo: High: 2 hours, Medium: 3 hours, Low: 8 hours
  • Material: Acrilonitrilo butadieno estireno (ABS), metal
  • Características especiais: 180° Rotatable Stand, 4 N42 Magnets, Waterproof, Shockproof
  • Fabricante: Hangzhou GREATSTAR INDUSTRIAL CO LTD
  • UPC: 820909691396

Vídeo oficial do produto

Video: Perfect Work Lights for Every Job (Duration: 1:44). This video demonstrates the features and versatility of the WORKPRO LED Work Light in various scenarios.

Garantía e Soporte

For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.