1. Introdución
This user manual provides essential information for the safe and efficient operation of your WZRELB 6000W Split Phase Pure Sine Wave Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference. This inverter converts 24V DC power from batteries into 120V/240V AC power, suitable for various off-grid and backup power applications.
2. Instrucións de seguridade
WARNING: Improper installation or use can result in electric shock, fire, or serious injury. Always follow safety guidelines.
- Ensure all connections are tight and secure to prevent loose connections that can cause overheating.
- Do not expose the inverter to rain, snow, spray, or excessive dust.
- Operate the inverter in a well-ventilated area.
- Non abra o inversor casing. Non hai pezas que o usuario poida reparar no interior. Encárguese do mantemento por persoal cualificado.
- Always disconnect battery power before working on the inverter or its connections.
- Asegúrese de que a entrada de CC voltage matches the inverter's rated voltage (24 V CC).
- Connect the inverter to a properly grounded system.
3. Produto rematadoview
3.1 Características principais
- Potente saída: 6000 watts continuous, 12000 watts peak power, 24V DC to 120V/240V AC split phase pure sine wave output.
- Alta eficiencia: Up to 91.6% conversion efficiency.
- Múltiples saídas de CA: Two 120V AC circuits with four AC outlets (each supporting 3000W max) and one 240V AC circuit (max 6000W output).
- Hardwire Terminal: Includes an AC hardwire terminal for flexible wiring (L1+L2=240V, L1+N=120V, L2+N=120V).
- Control intelixente: LCD display monitors battery status, working temperature, and output voltage.
- Proteccións completas: Features against overload, short circuit, over temperature, high/low voltage, and battery reverse polarity.
- Ampla compatibilidade: Compatible with AGM, gel, flooded, lead-acid, and lithium-ion batteries.
3.2 Que hai na caixa
- Inversor de onda sinusoidal pura de fase dividida WZRELB 6000 W
- DC Input Cables
- Fusibles de recambio
- Manual de usuario (este documento)
3.3 Especificacións
| Especificación | Valor |
|---|---|
| Potencia continua nominal | 6000 W |
| potencia de saída de pico | 12000 W |
| Vol. De entrada CCtage | 24V DC |
| Vol. De entrada CCtage Alcance | 20 ~ 30 V CC |
| Saída CA Voltage (nominal) | 120 VCA e 240 VCA |
| Frecuencia de saída de CA | 60 ± 2 Hz |
| Forma de onda de saída de CA. | Pura Sine Wave |
| Eficiencia de conversión | ≥ 91.6 % |
| Temperatura ambiente de funcionamento | 0 ℃ - 70 ℃ (32 ℉ - 104 ℉) |
| Método de arrefriamento | Ventilador intelixente controlado por temperatura |
| Dimensións (L x W x H) | 21.8" x 10" x 5.3" |
| Peso | 25 libras |
4. Configuración
4.1 DC Connection Guide
Follow these steps to connect the inverter to your 24V DC battery bank. Use the provided cables for optimal performance and safety.
- Connect Negative Cable First: After connecting the black cable to the battery's negative terminal, connect the other end of the black cable to the negative terminal of the inverter.
- Contacting Spark-Proof Nut: After connecting the red cable to the battery's positive terminal, briefly contact the other side of the red cable to the spark-proof nut on the inverter's positive terminal for 3-5 seconds. This helps to prevent sparks during final connection.
- Connect Positive Cable: Securely connect the red cable to the positive terminal of the inverter to complete the DC wiring.
4.2 Conexión de saída de CA
The inverter provides both 120V AC outlets and a hardwire terminal for 120V/240V split-phase output. Ensure all AC connections are made by a qualified electrician and comply with local electrical codes.
- Tomas de corrente de 120 V CA: The inverter features four standard US outlets, divided into two circuits, each capable of supporting up to 3000W.
- Hardwire Terminal: For 120V/240V split-phase applications, connect to the hardwire terminal. The connections are L1 (Hot 1), N (Neutral), L2 (Hot 2), and G (Ground).
5. Instrucións de funcionamento
5.1 Pantalla LCD
The LCD display provides real-time information about the inverter's status and performance.
- Estado: Indicates normal operation or fault conditions.
- Batería Voltage & Capacity: Mostra o volume de entrada de CC actualtage and estimated battery charge level.
- Temperatura: Mostra a temperatura interna do inversor.
- AC1/AC2 120V Output: Mostra voltage e amperage for each 120V circuit.
- Saída 240 V: Mostra o volume de saídatage and frequency for the 240V circuit.
5.2 Funcionamento xeral
- After completing all DC and AC connections, ensure the inverter's power switch is in the OFF position.
- Turn on the DC power from your battery bank.
- Switch the inverter's power button to the ON position. The LCD display will illuminate, showing operational status.
- Connect your AC loads to the outlets or hardwire terminal. Do not exceed the inverter's rated continuous power.
- To turn off the inverter, first disconnect all AC loads, then switch the inverter's power button to OFF, and finally disconnect the DC power from the battery bank.
6. Mantemento
Un mantemento regular garante a lonxevidade e o funcionamento fiable do seu inversor.
- Limpeza: Limpa periodicamente o exterior do inversor cun pano suave e seco. Asegúrate de que as aberturas de ventilación estean libres de po e residuos. Non empregues produtos de limpeza líquidos.
- Conexións: Annually check all DC and AC connections for tightness. Loose connections can cause resistance, heat buildup, and potential damage.
- Saúde da batería: Monitor your battery bank's health and charge levels regularly, as poor battery performance can affect inverter operation.
- Ambiente: Ensure the inverter is operating within the recommended ambient temperature range and in a dry, well-ventilated location.
7 Solución de problemas
Esta sección aborda problemas comúns que podes atopar co teu inversor.
| Problema | Causa posible | Solución |
|---|---|---|
| O inversor non se acende | Sen alimentación de CC de entrada; Volumen baixo da bateríatage; Blown fuse; Loose connections. | Comprobe as conexións da batería e o voltage. Ensure batteries are charged. Inspect DC input fuses. Tighten all connections. |
| Sen saída de CA | Overload; Over-temperature; Short circuit; Inverter fault. | Reduce AC load. Allow inverter to cool down. Check AC wiring for short circuits. If problem persists, contact support. |
| A pantalla LCD mostra o código de erro | Specific fault condition (e.g., high/low voltage, overload). | Refer to the LCD display section for error code meanings. Address the indicated issue (e.g., check battery voltage, reduce load). |
| Unusual noises from inverter | Loose internal components; Fan obstruction; Component failure. | Ensure the inverter is on a stable surface. Check for fan obstructions. If noises persist or are accompanied by other issues, discontinue use and contact support. |
8. Vídeo do produto
Watch the official product video for a visual guide on the WZRELB 6000W Split Phase Pure Sine Wave Inverter.
Official product video demonstrating the features and applications of the WZRELB 6000W Split Phase Pure Sine Wave Inverter.
9. Garantía e soporte
The WZRELB 6000W Split Phase Pure Sine Wave Inverter comes with a garantía dun ano desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal.
For technical support, warranty claims, or service inquiries, please contact WZRELB customer service through the retailer where the product was purchased or visit the official WZRELB websitio para información de contacto.