ERYUE LED Motorcycle Tail Light with Integrated Turn Signals User Manual

1. Introdución

Thank you for choosing the ERYUE LED Motorcycle Tail Light with Integrated Turn Signals. This product is designed to enhance visibility and safety for your motorcycle. It features a super bright LED tail light with integrated running, brake, and sequential turn signal functions. This manual provides essential information for proper installation, operation, and maintenance of your new tail light.

This tail light is a direct replacement for various Yamaha models, including YZF R3, R25, Y15ZR, MT07, FZ07, and LC150.

2. Información de seguridade

Please read all safety warnings and instructions carefully before installation and use. Failure to follow these instructions may result in electrical shock, fire, and/or serious injury.

• Desconecte sempre a batería da motocicleta antes de realizar calquera traballo eléctrico.
• Asegúrate de que todas as conexións estean seguras e debidamente illadas para evitar curtocircuítos.
• If you are unsure about the installation process, consult a qualified motorcycle technician.
• Do not modify the product in any way, as this may void the warranty and compromise safety.
• This product is designed for 12V DC motorcycle electrical systems only.

3. Contido do paquete

Comprobe que todos os elementos estean presentes e sen danos ao abrir o paquete.

• 1 x ERYUE LED Motorcycle Tail Light with Integrated Turn Signals

Note: Additional tools and wiring connectors may be required for installation and are not included.

4. Configuración e instalación

This tail light features an easy plug-and-play installation with an included sub-harness. However, basic mechanical and electrical knowledge is recommended.

4.1 Ferramentas necesarias (non incluídas)

• Xogo de desaparafusadores (Phillips e de punta plana)
• Set de chaves de tubo
• Wire strippers/crimpers (if custom wiring is needed)
• Cinta illante ou tubo termorretráctil

4.2 Pasos da instalación

1. Preparar a motocicleta:

   Park the motorcycle on a stable, level surface. Turn off the ignition and remove the key. Disconnect the negative terminal of the motorcycle battery to prevent accidental electrical shorts during installation.
2. Access the Existing Tail Light:

   Locate and remove any fairings, seats, or panels necessary to access the existing tail light assembly and its wiring. Refer to your motorcycle's service manual for specific instructions on removing these components.

3. Remove the Old Tail Light:

   Unplug the wiring harness from the existing tail light. Unscrew or unbolt the old tail light from its mounting points and carefully remove it.

   

   Image 1: ERYUE LED Tail Light installed on a motorcycle, displaying the running light function.
4. Install the New ERYUE Tail Light:

   Position the new ERYUE LED Tail Light into the mounting location. Secure it using the original screws or bolts. Ensure it is firmly seated and aligned correctly.

   

   Imaxe 2: Fronte view of the ERYUE LED Tail Light, highlighting the smoked lens design.

5. Conecte o cableado:

   Connect the included sub-harness to the new tail light and then to the motorcycle's existing wiring harness. The plug-and-play design should make this straightforward. Ensure the connectors click into place securely.

   Wiring Color Code (Typical):

   • Negro: Terra (-)
   • Vermello: Brake Light (+)
   • Verde: Running Light (+)
   • amarelo: Left Turn Signal (+)
   • Azul: Right Turn Signal (+)

   Note: Actual wire colors on your motorcycle may vary. Always verify with a multimeter or your motorcycle's wiring diagram if unsure.

   

   Imaxe 3: Traseira view of the ERYUE LED Tail Light, showing the integrated wiring harness.

6. Proba as luces:

   Reconnect the motorcycle battery. Turn on the ignition and test all functions: running light, brake light, left turn signal, and right turn signal. Ensure all lights illuminate correctly and the sequential turn signals operate as expected.

   

   Image 4: ERYUE LED Tail Light displaying the bright red brake light function.
   

   Image 5: ERYUE LED Tail Light with the amber sequential turn signal illuminated.

7. Remontar:

   Once all functions are verified, carefully reassemble any removed fairings, seats, or panels.

5. Instrucións de funcionamento

The ERYUE LED Motorcycle Tail Light operates automatically with your motorcycle's electrical system.

• Luz de funcionamento: When the motorcycle's ignition is on and headlights are activated, the tail light will illuminate with a low-brightness red light.
• Luz de freo: When the brake lever or pedal is applied, the tail light will illuminate with a high-brightness red light. It also features a stop alert function, where the brake light flashes 3 times rapidly when the brakes are first applied, then remains solid.
• Sinais de giro: When the left or right turn signal switch is activated, the corresponding side of the tail light will illuminate with sequential amber LEDs, indicating the direction of the turn.

6. Mantemento

The ERYUE LED Motorcycle Tail Light is designed for durability and requires minimal maintenance.

• Limpeza: Limpar a lente cun suave, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the plastic lens.
• Inspección: Periodically check the tail light for any signs of damage, loose connections, or moisture ingress. Ensure all mounting hardware remains secure.
• Impermeabilización: The product has an IPX66 waterproof rating, meaning it is protected against powerful water jets. However, avoid submerging the light. Ensure all seals and connections are intact after installation.

7 Solución de problemas

If you encounter issues with your ERYUE LED Motorcycle Tail Light, refer to the following common problems and solutions:

8. Especificacións

Detailed technical specifications for the ERYUE LED Motorcycle Tail Light.

9. Garantía e soporte

ERYUE products are manufactured to high-quality standards. For warranty information and customer support, please refer to the retailer where you purchased this product or visit the official ERYUE websitio.

Conserve o comprobante de compra para calquera reclamación de garantía.