Manual de instrucións do kit de accesorios para aspiradora húmida e seca sen fíos Eureka NEW400

1. Introdución

This instruction manual provides guidance for the proper installation, replacement, and maintenance of the Eureka NEW400 Cordless Wet Dry Vacuum accessory kit. This kit includes one specialized roller brush and two replacement filters, designed to maintain the optimal performance of your Eureka NEW400 vacuum cleaner.

Contido do paquete:

1 x Specialized Roller Brush
2 x Foam Filters

Eureka NEW400 accessory kit showing one roller brush and two blue foam filters — Image 1.1: Contents of the Eureka NEW400 Accessory Kit, including one roller brush and two foam filters.

2. Compatibilidade

Important: This accessory kit is specifically designed for the Eureka NEW400 Cordless Wet Dry Vacuum Cleaner. Ensure your vacuum model is NEW400 to guarantee proper fit and function. Using incompatible parts may damage your appliance or affect its performance.

3. Roller Brush Installation and Replacement

Follow these steps to replace the roller brush in your Eureka NEW400 Cordless Wet Dry Vacuum Cleaner:

Apagado: Ensure the vacuum cleaner is turned off and unplugged from its charging base before proceeding.
Access Brush Roll Cover: Locate the brush roll cover on the vacuum head. It typically has a latch or button to release it. Open the cover.
Remove Old Brush Roll: Gently pull the old roller brush upwards and out of its compartment.
Insert New Brush Roll: Align the new roller brush with the slots in the vacuum head. Push it down firmly until it clicks into place.
Pechar a cuberta: Close the brush roll cover securely.

Two images showing the process of replacing the roller brush in the Eureka NEW400 vacuum. The top image shows opening the brush roll cover, and the bottom image shows pulling the roller brush upwards to remove it. — Image 3.1: Visual guide for replacing the roller brush. First, open the brush roll cover, then pull the old brush upwards to remove it.

4. Instalación e substitución do filtro

Follow these steps to replace the foam filters in your Eureka NEW400 Cordless Wet Dry Vacuum Cleaner:

Apagado: Asegúrate de que o aspirador estea apagado e desconectado da base de carga.
Localizar o compartimento do filtro: Identify the filter compartment, typically located within the dirty water tank or a dedicated filter housing.
Eliminar filtros antigos: Open the filter housing and carefully remove the old foam filters. Note their orientation.
Inserir novos filtros: Place the new foam filters into the housing, ensuring they are correctly seated. The image indicates placing the filter sponge upward.
Pechar o compartimento: Close the filter housing securely.

Three images illustrating the filter replacement process for the Eureka NEW400 vacuum. The first shows the cartridge, the second shows removing the filter upwards, and the third shows inserting the new filter sponge. — Image 4.1: Step-by-step guide for replacing the filter sponge. The filter cartridge is shown, followed by the removal of the old filter and insertion of the new filter sponge.

5. Programa de mantemento e substitución

Regular replacement of the roller brush and filters is crucial for maintaining the cleaning efficiency and longevity of your Eureka NEW400 Cordless Wet Dry Vacuum Cleaner.

Cepillo de rolo: It is recommended to replace the roller brush every 6 months with normal use. Inspect the brush regularly for wear, damage, or excessive debris accumulation that cannot be cleaned.
Foam Filters: It is recommended to replace the foam filters every 6 months with normal use. Clogged or dirty filters can reduce suction power and affect cleaning performance.

For optimal performance, clean the roller brush and filters after each use as per your vacuum cleaner's main instruction manual.

6. Especificacións

Característica	Detalle
Nome do produto	Eureka NEW400 Cordless Wet Dry Vacuum Specialized Accessories Kit
Compatibilidade de modelos	Eureka NEW400 Cordless Wet Dry Vacuum Cleaner
Número de peza	12175000A41056
Contido do paquete	1 x Roller Brush, 2 x Foam Filters
Dimensións do paquete	10.51 x 5.35 x 2.2 polgadas
Peso do elemento	7 onzas
Fabricante	EUREKA
Pilas necesarias	Non

7 Solución de problemas

If you encounter issues after replacing your accessories, consider the following:

Accessory Does Not Fit: Double-check that your vacuum cleaner is indeed the Eureka NEW400 model. This accessory kit is specifically designed for this model.
Potencia de succión reducida: Ensure filters are correctly installed and not clogged. If filters are new, check the main vacuum unit for other potential issues as per its instruction manual.
O cepillo de rolos non xira: Verify the roller brush is properly seated and the brush roll cover is securely closed. Check for any obstructions around the brush.
Ruídos pouco comúns: Ensure all parts are correctly installed and there are no foreign objects caught in the brush roll area.

For further assistance, refer to your Eureka NEW400 Cordless Wet Dry Vacuum Cleaner's main instruction manual or contact Eureka customer support.

8. Garantía e soporte

For information regarding the warranty of your Eureka NEW400 Cordless Wet Dry Vacuum Cleaner and its accessories, please refer to the warranty card included with your original vacuum purchase or visit the official Eureka websitio.

For technical support, replacement parts, or service inquiries, please contact Eureka Customer Service:

Websitio: www.eureka.com (Consulte o formulario oficial websitio web para obter a información de contacto máis actualizada).
Atención ao cliente: Refer to the contact section on the Eureka website or your original product manual.

Eureka NEW400 Accessory Kit