Manual de usuario do dispensador automático de xabón de mans Miffy

Introdución

This manual provides essential information for the safe and efficient operation of your Miffy Automatic Hand Soap Dispenser. Please read this manual thoroughly before using the product and retain it for future reference.

The Miffy Automatic Hand Soap Dispenser is designed for convenient and hygienic hand washing, featuring a touchless operation and a charming Miffy design.

Información de seguridade

• Do not immerse the entire unit in water. The unit is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction, but not full submersion.
• Manter fóra do alcance dos nenos a menos que estea supervisado por un adulto.
• Use only recommended soap types. Avoid detergents with solid particles, as they may clog the dispenser.
• Ensure the USB charging port is dry and properly sealed with the rubber plug before exposure to water.
• Non intente desmontar nin reparar a unidade vostede mesmo. Póñase en contacto co servizo de atención ao cliente para obter axuda.

Contido do paquete

Comprobe se o paquete contén os seguintes elementos:

• Miffy Automatic Hand Soap Dispenser (Yellow)
• Cable de carga USB
• Soporte de montaxe en parede
• Manual de usuario (este documento)

Produto rematadoview

Familiarize yourself with the main components of your Miffy Automatic Hand Soap Dispenser.

Figura 1: Fronte view of the Miffy Automatic Hand Soap Dispenser.

Figure 2: Miffy Automatic Hand Soap Dispensers in yellow and pink, highlighting the design.

• Dispenser Nozzle: Where the foam is dispensed.
• Sensor infravermello: Detects hand movement for automatic dispensing.
• Soap Reservoir: Holds the liquid soap, visible through the clear window with the Miffy character.
• Porto de carga: Porto USB para recargar a batería interna.
• Luz indicadora: Shows charging status (red when charging, white when fully charged).

Configuración

1. Charging the Dispenser

Before first use, fully charge the dispenser. A full charge can last for approximately 2-3 months or 5000 uses.

1. Locate the USB charging port, usually at the back or bottom of the unit.
2. Connect the provided USB charging cable to the dispenser and a suitable power source (e.g., USB wall adapter, computer USB port).
3. The indicator light will illuminate red during charging.
4. Charge for 2-3 hours until the indicator light turns white, indicating a full charge.

2. Filling with Soap

The dispenser is compatible with both foam soap and liquid soap. Proper dilution is crucial for liquid soaps to ensure optimal foam production and prevent clogging.

Figure 3: The dispenser ready for use on a surface.

• For Foam Soap: Pour foam soap directly into the reservoir. No dilution is needed.
• For Liquid Soap (e.g., shampoo, face cleaner, dish detergent):
  1. Dilute the liquid soap with water at a ratio of 1:4 (1 part soap to 4 parts water). For example, if you add 50ml of liquid soap, add 200ml of water.
  2. Stir the mixture thoroughly until well combined.
  3. Carefully pour the diluted mixture into the dispenser's reservoir.

  Important: Do not use sticky, creamy hand sanitizers, or detergents containing solid particles directly, as this will block the dispenser.

3. Montaxe na parede (opcional)

A wall mount bracket is included to prevent splashing and keep your bathroom tidy.

Figure 4: The dispenser shown with its wall mount bracket.

1. Clean and dry the desired wall surface.
2. Attach the wall mount bracket to the wall using the adhesive backing or appropriate fasteners (not included for adhesive).
3. Ensure the bracket is securely fixed before placing the dispenser.
4. Carefully place the Miffy Automatic Hand Soap Dispenser onto the bracket.

Instrucións de funcionamento

Using your Miffy Automatic Hand Soap Dispenser is simple and hygienic.

Figure 5: Hand placed under the sensor for foam dispensing.

1. Ensure the dispenser is charged and filled with appropriate soap.
2. Place your hand within the sensing area, typically directly under the nozzle.
3. The high-precision infrared sensor will detect your hand and dispense foam in approximately 0.25 seconds.
4. Remove your hand once the desired amount of foam is dispensed.

Mantemento

Regular cleaning ensures the longevity and optimal performance of your dispenser.

• Limpeza exterior: Limpe o exterior do dispensador cun pano suave eamp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Limpeza de boquillas: If the nozzle becomes clogged, gently wipe it with a damp cloth. Do not insert any objects into the nozzle.
• Soap Reservoir: If changing soap types or if the dispenser will not be used for an extended period, empty and rinse the reservoir with clean water. Dispense some clean water through the nozzle to clear any residue.
• Almacenamento: When not in use for a long time, ensure the dispenser is clean, dry, and fully charged. Store it in a cool, dry place.

Resolución de problemas

Se tes problemas co teu dispensador, consulta os seguintes problemas e solucións comúns:

Especificacións

Garantía e Soporte

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official MIPOW websitio. Garde o recibo da compra como xustificante da mesma.

Para obter máis axuda, tamén podes contactar directamente co vendedor a través da plataforma onde compraches o produto.