Introdución
The Disney Wish Star Squishy Light is a soft, squeezable LED night light designed to provide adjustable illumination. This product can be powered via a USB-C cable or AAA batteries, offering versatility for various uses. This manual provides essential information for the safe and effective use of your new light.
Vídeo: Rematadoview of the Disney Wish Star Squishy Light, demonstrating its soft texture and light features.
Información de seguridade
- Este produto está deseñado só para uso en interiores.
- Keep the light away from water and excessive moisture.
- Non intente desmontar nin modificar a luz.
- Use only specified power sources (3 AAA batteries or 5V, 1A USB-A adapter).
- Despeje as pilas correctamente segundo a normativa local.
- Asegúrate de que o compartimento da batería estea ben pechado para evitar o acceso dos nenos.
- The light is cool to the touch, but avoid prolonged direct contact with the LED source.
Contido do paquete
- 1 x Disney Wish Star Squishy Light
- 1 x cable USB-C
Note: 3 AAA batteries and a 5V, 1A USB-A power adapter are not included.
Configuración
Alimentando o dispositivo
Your Disney Wish Star Squishy Light can be powered in two ways: via USB-C cable or with AAA batteries.
- Battery Installation (3 x AAA, not included):
To install batteries, locate the battery compartment on the base of the light. Use a small screwdriver to remove the screw securing the battery cover. Insert three (3) AAA batteries, ensuring correct polarity (+/-). Replace the battery cover and secure it with the screw. - USB-C Power Connection:
Insert the USB-C end of the included cable into the port on the back of the light. Plug the USB-A end of the cable into a 5V, 1A USB-A power adapter (not included) or a compatible USB port.
Image: The two power options for the light: USB-C cable and 3 AAA batteries.
Video: Step-by-step guide on setting up the Disney Wish Star Squishy Light, including battery installation and USB connection.
Operación
- Encendido/apagado:
Locate the ON/OFF button on the base of the light. Press the button once to turn the light ON. Press and hold the button to turn the light OFF. - Axuste do brillo:
Once the light is ON, gently tap or squeeze the soft silicone body of the Star Squishy Light to cycle through three levels of white light (high, medium, low).
Image: Demonstrating how to tap the light to adjust brightness.
Automatic Shut-Off (Battery Mode Only): When powered by batteries, the light will automatically turn off after 60 minutes to conserve battery life.
Mantemento
- To clean the light, gently wipe the silicone surface with a soft, damp pano.
- Do not use abrasive cleaners or immerse the light in water.
- Ensure the light is completely dry before reconnecting to power.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | No power, dead batteries, or loose connection. | Check battery installation and replace if necessary. Ensure USB-C cable is securely connected to a working power source. |
| Brightness does not change. | Insufficient tap/squeeze force or sensor issue. | Ensure you are gently tapping or squeezing the light's body. If the issue persists, try turning the light off and on again. |
| Light turns off automatically. | Operating on battery power. | This is a normal feature when using batteries (60-minute auto-off). For continuous operation, use USB-C power. |
Especificacións
- Número de modelo: 79616
- Dimensións: 5.5" D x 5.6" W x 6.1" H
- Material: Goma de silicona branda
- Fonte de luz: LED
- Fonte de enerxía: 3 x AAA Batteries (not included) or USB-C (5V, 1A USB-A adapter required, not included)
- Método de control: Touch/Squeeze
- Características: Dimmable (3 levels of white light), 60-minute auto-off (battery mode)
- Fabricante: Jasco Products Company, LLC
Image: Product dimensions of the Star Squishy Light.
Garantía e Soporte
This Disney Wish Star Squishy Light is covered by a 90-day manufacturer's warranty. For warranty claims or technical support, please contact Jasco Products Company, LLC directly. Refer to the product packaging or manufacturer's websitio para información de contacto.
