Manual de usuario

1. Introdución

This manual provides detailed instructions for the setup, operation, and maintenance of your Waytronic Infrared Motion Sensor Activated Sound Speaker. This device is designed to detect motion and play a pre-recorded or custom voice message, serving various purposes such as greeting visitors, providing security alerts, or acting as a reminder.

2. Características do produto

The Waytronic Infrared Motion Sensor Activated Sound Speaker offers the following key functionalities:

• Customizable Voice Recording: Equipped with a built-in microphone, allowing users to record and customize their own voice messages. Recording is initiated by pressing a button.
• Extended Recording Capacity: Supports recording up to 130 seconds, with the ability to segment recordings.
• Detección de movemento amplo: Features a detection range with a 120-degree horizontal and 60-degree vertical angle.
• Volume axustable: Provides two distinct volume levels for clear audio output.
• Opcións de enerxía flexibles: Can be powered by three AAA dry batteries or a DC5V USB power supply.
• Easy Re-recording: Messages can be re-recorded as many times as needed, simply by pressing a button.

3. Contido do paquete

Comprobe que todos os elementos estean presentes no paquete:

• Infrared Motion Sensor Activated Sound Speaker (Black)
• Parafusos de montaxe
• Ball Mounting Accessories
• Manual de usuario (este documento)

4. Produto rematadoview

Figura 4.1: Fronte e lateral view of the Waytronic Infrared Motion Sensor Activated Sound Speaker. The front features the PIR sensor and speaker grille, while the side shows the mounting bracket.

Figura 4.2: Fronte detallada view of the speaker with key components labeled: PIR Sensor, Volume/ON/OFF switch, Button A (Record), Button B (Play/Stop), and the built-in speaker/microphone. The ball mounting accessory is also shown.

Figura 4.3: Traseira view of the speaker showing the Screw Mounting Hole, Bracket Mounting points, and the Battery Case for three AAA batteries.

Figura 4.4: Lado view illustrating the USB port for power supply (DC5V) and the 360-degree rotatable mounting bracket.

5. Instalación

1. Fonte de alimentación:
   • Insert three AAA batteries into the battery case located on the back of the device (refer to Figure 4.3). Ensure correct polarity.
   • Alternatively, power the device using a DC5V USB cable connected to the USB port on the side (refer to Figure 4.4).
2. Lugar de montaxe:
   • Choose an indoor location such as a front door, corridor, or shop entrance.
   • For optimal performance and to prevent false triggers, avoid areas with direct sunlight, significant temperature variations, or proximity to air conditioners and heaters.
3. Montaxe do dispositivo:
   • Use the provided mounting screws and ball mounting accessories to secure the speaker to a wall or surface. The ball mounting allows for 360-degree rotation to adjust the detection angle.
   • Ensure the PIR sensor (Figure 4.2) faces the area where motion detection is desired.

6. Funcionamento

6.1. Recording a Message

1. Ensure the device is powered on using the Volume/ON/OFF switch (Figure 4.2).
2. Mantén premido Button A (Record). The indicator light may change to confirm recording mode.
3. Speak clearly into the built-in microphone (located near the speaker grille, Figure 4.2). The maximum recording time is 130 seconds.
4. Lanzamento Botón A to stop recording. A successful recording typically requires more than 3 seconds of audio.
5. To re-record, simply repeat the process. The new recording will overwrite the previous one.

6.2. Playing a Message

1. After recording, the device is ready to play the message upon motion detection.
2. To manually play the current message, press Button B (Play/Stop). Press again to stop playback.

6.3. Axuste do volume

Usa o Volume/ON/OFF switch (Figure 4.2) to select between two volume levels. Slide the switch to the desired position.

6.4. Detección de movemento

Once powered on and a message is recorded, the device will automatically play the message when motion is detected within its 120-degree horizontal and 60-degree vertical detection range.

Figura 6.1: This diagram illustrates that audio files are changed via button recording, not through USB data cable or TF card.

7. Aplicacións

The Waytronic Motion Sensor Speaker can be utilized in various scenarios:

• Greeting Visitors: Place at an entrance to play a welcoming message.
• Security Reminder: Record a warning message to deter intruders or remind individuals of security protocols.
• Daily Audio Reminders: Use for personal reminders in homes or offices.
• Sale Advertising: Play promotional messages in retail environments.
• Animal Deterrent: Record sounds to discourage animals from entering certain areas.
• Event Enhancement: Integrate into festive displays or haunted house setups for interactive sound effects.

Figura 7.1: Examples of applications including entrance door greeting, celebrating festivals, and home daily reminders.

Figura 7.2: The speaker used to greet visitors upon entry.

Figura 7.3: The speaker playing a security message to an approaching individual.

Figura 7.4: The speaker used to deter animals, such as a lemur, with an audible message.

8 Solución de problemas

9. Especificacións

10. Información de seguridade

• Non expoñas o dispositivo a temperaturas extremas, luz solar directa nin humidade elevada.
• Manteña o dispositivo lonxe da auga e doutros líquidos.
• Non intente abrir nin reparar o dispositivo vostede mesmo. Consulte persoal cualificado para o seu mantemento.
• Desfágase das baterías segundo a normativa local. Non mesture baterías vellas e novas nin baterías de diferentes tipos.
• Manter fóra do alcance dos nenos para evitar a inxestión accidental de pezas pequenas ou pilas.

11. Atención ao cliente

If you have any questions or encounter issues with your Waytronic Infrared Motion Sensor Activated Sound Speaker, please contact our customer support team. We are committed to assisting you within 24 hours.

Para obter asistencia, visite o Waytronic Store on Amazon ou consulte a información de contacto proporcionada coa súa compra.