1. Produto rematadoview
The Electro-Harmonix Pico Triboro Bridge is a versatile multi-mode drive pedal designed to provide a wide range of tonal possibilities. It features three distinct modes: Overdrive, Distortion, and Fuzz, allowing musicians to bridge any gap in their gain requirements. With its powerful EQ capabilities, input contouring, and compact pico-sized footprint, the Triboro Bridge can serve as a foundational element for your tone or offer a fresh alternative to your existing drive pedals.
Características principais:
- Wide range of saturation with Overdrive, Distortion, and Fuzz modes.
- Treble control boosts or cuts high end in Overdrive and Distortion modes.
- Bass control boosts or cuts low end in Overdrive and Distortion modes.
- Fuzz mode features a dedicated Gate control and a Low Pass Filter.
- Includes a power adapter for immediate use.
Imaxe: En ángulo view of the Electro-Harmonix Pico Triboro Bridge pedal, highlighting its compact size and control knobs.
2. Configuración e conexións
Follow these steps to connect your Pico Triboro Bridge pedal to your audio setup:
- Conexión de alimentación: Connect the included 9V DC power adapter to the power jack on the top of the pedal. Ensure the power supply meets the pedal's specifications (9V DC, center-negative).
- Conexión de entrada: Connect your instrument (guitar, bass, etc.) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- Conexión de saída: Conecte a toma OUTPUT do lado esquerdo do pedal ao seu amplificador ou o seguinte pedal da túa cadea de sinal usando un cable de instrumento estándar de 1/4 de polgada.
- Encendido: Once all connections are secure, plug the power adapter into a wall outlet. The pedal's LED will illuminate when active.
Imaxe: Traseira view of the Pico Triboro Bridge pedal, showing the power input jack for connecting the power adapter.
3. Controles e funcionamento
The Pico Triboro Bridge features intuitive controls for shaping your desired drive tone. Understanding each knob and button is key to unlocking its full potential.
Mandos de control:
- VOL (volume): Controls the overall output level of the pedal. Adjust this to balance the effect's volume with your bypassed signal or other effects.
- GAÑA: Controls the intensity of the drive, distortion, or fuzz effect. Higher settings result in more saturation and sustain.
- BASS / GATE:
- In Overdrive and Distortion modes, this knob functions as a Bass control, allowing you to boost or cut low frequencies.
- In Fuzz mode, this knob functions as a PORTA control, adjusting the noise gate threshold to eliminate unwanted noise and feedback.
- TREBLE / TONE:
- In Overdrive and Distortion modes, this knob functions as a TREBLE control, allowing you to boost or cut high frequencies.
- In Fuzz mode, this knob functions as a TONO control, specifically a Low Pass Filter, for extreme tonal variations and shaping the fuzz character.
TYPE Button:
The small button labeled "TYPE" at the top of the pedal is used to select between the three primary drive modes and to engage the Input Contour Mode.
- Selección de modo: Pressing the TYPE button cycles through the Overdrive (green LED), Distortion (orange LED), and Fuzz (red LED) modes.
- Input Contour Mode: Press and hold the TYPE button to enable or disable the Input Contouring EQ. When active, this mode applies a specific EQ to the input signal for a tighter, more modern character across all drive modes.
Imaxe: Arriba view of the Pico Triboro Bridge pedal, illustrating the layout of the VOL, GAIN, BASS/GATE, TREBLE/TONE knobs, and the TYPE button.
4. Drive Modes Explained
The Pico Triboro Bridge offers three distinct drive modes, each with its unique sonic characteristics:
- Overdrive Mode (Green LED): This mode provides a gain spectrum ranging from low to mid-level saturation with an open voicing. It is ideal for use as a subtle "always-on" drive, adding warmth and grit, or as a solo boost to push your ampmáis vivo.
- Distortion Mode (Orange LED): Engaging this mode provides additional gain-staging, delivering tones from crunchy rhythms to fully saturated leads. It offers a more aggressive and compressed sound compared to the Overdrive mode.
- Fuzz Mode (Red LED): This mode transforms the pedal into a high-gain fuzz effect with over-the-top saturation. The BASS knob becomes a GATE control, and the TREBLE knob becomes a Low Pass Filter, allowing for unique and extreme tonal variations specific to fuzz.
Video: Official demonstration of the Electro-Harmonix Pico Triboro Bridge pedal, showcasing its Overdrive, Distortion, and Fuzz modes, along with an overview of its controls and input contouring feature. This video highlights the tonal versatility of the pedal for both guitar and bass.
5. Especificacións
| Característica | Especificación |
|---|---|
| Peso do elemento | 1.21 libras (0.55 quilogramos) |
| Dimensións do produto | 3.65" de longo x 2" de ancho x 2" de alto (3.65 x 2 x 2 polgadas) |
| Número de modelo do artigo | PICO TRIBORO |
| Material do corpo | Plástico, Metal |
| Cor | Azul |
| Tipo de conector | Power Adapter (1/4-inch Audio Hardware Interface) |
| Formato de sinal | Analóxico |
| Fonte de enerxía | Eléctrico con cable |
| Voltage | 9 voltios |
6. Mantemento
To ensure the longevity and optimal performance of your Pico Triboro Bridge pedal, follow these maintenance guidelines:
- Limpeza: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Almacenamento: Garda o pedal nun lugar fresco e seco, lonxe da luz solar directa, de temperaturas extremas e de alta humidade cando non o uses.
- Conexións: Comprobe periodicamente todas as conexións dos cables para detectar desgaste. Asegúrese de que os conectores estean libres de po e residuos.
- Fonte de alimentación: Always use the recommended 9V DC center-negative power adapter. Using an incorrect power supply can damage the unit and void the warranty.
7 Solución de problemas
If you encounter issues with your Pico Triboro Bridge pedal, refer to the following common troubleshooting steps:
- Sen son:
- Check all cable connections (instrument to input, output to amp).
- Asegúrate de que o adaptador de corrente estea conectado correctamente e funcione.
- Verify that your instrument and ampo lifier funcionan correctamente.
- Check the pedal's bypass status; if it's true bypass, sound should pass even if the pedal is off.
- Weak or Distorted Sound (unexpectedly):
- Check the GAIN and VOL knob settings.
- Ensure the correct drive mode (Overdrive, Distortion, Fuzz) is selected for your desired sound.
- If in Fuzz mode, adjust the GATE and TONE (Low Pass Filter) knobs, as extreme settings can significantly alter the sound.
- Test with different cables and power supplies to rule out faulty accessories.
- Ruído/zunido excesivo:
- Ensure you are using a regulated, isolated power supply.
- If in Fuzz mode, adjust the GATE knob to reduce unwanted noise.
- Check for ground loops in your setup.
- Move the pedal away from power transformers or other sources of electromagnetic interference.
8. Garantía e soporte
Electro-Harmonix products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official Electro-Harmonix websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o recibo da compra como proba de compra para reclamacións de garantía.
Para obter máis axuda, visite: www.ehx.com