Introdución
This manual provides instructions for the safe and efficient use of your RadioShack Y665 Wireless Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference. This compact and portable speaker features Bluetooth 5.0 connectivity, a 5W audio output, and an 800mAh rechargeable battery, offering 5 to 6 hours of continuous playback.
Produto rematadoview
Contido do paquete
- RadioShack Y665 Wireless Bluetooth Speaker
- Cable de carga USB
- Cable auxiliar de 3.5 mm
Identificación de compoñentes
This image displays the top panel of the speaker, highlighting the control buttons. From left to right, these include the Power button, Play/Pause button, Volume Down button, Volume Up button, and Mode (M) button.
This image shows the speaker alongside its USB charging cable. The charging port is typically located on the side or back of the speaker.
- Botón de encendido: Manteña premido para activar ou desactivar o altofalante.
- Botón Reproducir/Pausa: Preme para reproducir ou pausar o audio.
- Baixar o volume (-): Prema para diminuír o volume.
- Subir volume (+): Prema para aumentar o volume.
- Botón de modo (M): Press to switch between Bluetooth and Auxiliary input modes.
- Porto de carga: Porto micro USB para cargar o altofalante.
- Entrada auxiliar: Conector de 3.5 mm para conexión de audio con cable.
Configuración
Cargando o altofalante
Antes do primeiro uso, carga completamente o altofalante para garantir un rendemento óptimo da batería.
- Connect the small end of the included USB charging cable to the charging port on the speaker.
- Conecta o extremo grande do cable USB a un adaptador de corrente USB (non incluído) ou ao porto USB dun ordenador.
- A luz indicadora de carga acenderase (a cor pode variar) durante a carga e apagarase ou cambiará de cor cando estea completamente cargada.
- Charging typically takes 2 to 3 hours.
Encendido/apagado
To turn the speaker ON, press and hold the Botón de encendido until you hear an audible prompt or see an indicator light.
To turn the speaker OFF, press and hold the Botón de encendido again until you hear an audible prompt or the indicator light turns off.
Instrucións de funcionamento
Emparejamento Bluetooth
- Ensure the speaker is charged and powered ON. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
- No teu dispositivo móbil (teléfono intelixente, tableta, etc.), activa o Bluetooth e busca os dispositivos dispoñibles.
- Select "RadioShack Y665" (or similar name) from the list of found devices.
- Unha vez emparellado, o altofalante emitirá unha confirmación audible e o indicador LED deixará de parpadear e permanecerá fixo.
- O altofalante volverá conectarse automaticamente co último dispositivo emparellado ao acendelo, se o dispositivo está dentro do alcance e o Bluetooth está activado.
Auxiliary (AUX) Mode
- Connect one end of the 3.5mm auxiliary cable to the AUX input port on the speaker.
- Connect the other end of the auxiliary cable to the headphone jack of your audio source device.
- Preme o Botón de modo (M). on the speaker to switch to AUX mode.
- Play audio from your connected device. Volume can be controlled via both the speaker and the source device.
Reprodución de música
- Reproducir/Pausa: Preme o Botón Reproducir/Pausa to start or pause music.
- Axuste de volume: Preme o Subir volume (+) or Baixar volume (-) buttons to adjust the speaker's volume.
Mantemento
Limpeza
- Disconnect the speaker from all power sources before cleaning.
- Use un pano suave e seco para limpar o exterior do altofalante.
- Non empregue produtos de limpeza abrasivos, ceras nin solventes.
- Evite a entrada de humidade en calquera abertura.
Almacenamento
- Garde o altofalante nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- Se a gardas durante un período prolongado, cárgaa periodicamente para manter a súa vida útil.
Resolución de problemas
Problemas comúns e solucións
| Problema | Solución |
|---|---|
| O altofalante non se acende. | Asegúrate de que a batería estea cargada. Conecta o altofalante a unha fonte de alimentación mediante o cable USB. |
| Sen son. | Check the volume level on both the speaker and your connected device. Ensure the speaker is in the correct mode (Bluetooth or AUX). |
| Non se pode emparellar por Bluetooth. | Ensure the speaker is in pairing mode (flashing LED). Turn off Bluetooth on your device and turn it back on. Move the speaker closer to your device. Clear previous Bluetooth connections on your device. |
| Mala calidade de son. | Ensure the speaker and connected device are within Bluetooth range (10m). Check for interference from other wireless devices. Try a different audio source or cable (for AUX mode). |
Especificacións
Especificacións técnicas
| Característica | Especificación |
|---|---|
| Modelo | 100124414 (Y665) |
| Potencia de saída | 5W |
| Versión Bluetooth | 5.0 |
| distancia wireless | Ata 10 metros (33 pés) |
| Capacidade da batería | 800 mAh |
| Tempo de reprodución | 5 a 6 horas |
| Tempo de carga | 2 a 3 horas |
| Potencia de entrada | 5 V CC, 1 A |
| Banda de frecuencia | 2400 MHz - 2483.5 MHz |
| Cor | Negro |
| UPC/GTIN | 793945379804 |
| Accesorios incluídos | USB Charging Cable, 3.5mm Auxiliary Cable |
Información da garantía
This product is covered by a warranty of 1 month from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to your retailer or the official RadioShack websitio.
Atención ao cliente
For technical assistance or further information, please visit the official RadioShack websitio: www.radioshack.com.mx
You may also contact customer service at: 55 2582 0999.