XPG Core Reactor II Power Supply User Manual

1. Introdución

The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.

2. Información de seguridade

Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.

• Seguridade eléctrica: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
• Conexión a terra adecuada: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
• Ventilación: Do not block the ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
• Ambiente: Operate the power supply in a dry, well-ventilated environment. Avoid exposure to moisture, dust, and extreme temperatures.
• Manexo: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
• Servizo autorizado: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.

3. Contido do paquete

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.

• XPG Core Reactor II Power Supply Unit
• Modular Cable Set (including ATX 24-pin, EPS/CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral cables)
• Cable de alimentación de CA
• Parafusos de montaxe
• Manual de usuario (este documento)

Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.

4. Configuración e instalación

Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.

1. Prepara o teu sistema: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your computer case.
2. Retirar a fonte de alimentación antiga (se corresponde): Desconecta todos os cables da túa antiga fonte de alimentación e retira os seus parafusos de montaxe. Deslízaa con coidado para sacala da carcasa.
3. Montar a nova fonte de alimentación: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
4. Conectar cables modulares: Due to its full modular design, you only need to connect the cables required for your components.
   • Potencia da placa base: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
   • Potencia da CPU: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
   • Potencia da tarxeta gráfica: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
   • Dispositivos SATA: Conecta os cables de alimentación SATA aos teus SSD, HDD e unidades ópticas.
   • Dispositivos periféricos: Connect peripheral (Molex) cables for case fans or other accessories as needed.
5. Xestión de cables Pasa os cables con coidado para mellorar a circulación do aire e a estética dentro da túa carcasa.
6. Close Case and Connect Power: Once all connections are secure, close your computer case. Connect the AC power cord to the power supply and then to a wall outlet.

5. Instrucións de funcionamento

Operating the XPG Core Reactor II Power Supply is straightforward once installed.

• Encendido: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
• Eficiencia: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
• Active PFC: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
• Apagado: To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.

6. Mantemento

Un mantemento regular axuda a garantir a lonxevidade e o rendemento óptimo da súa fonte de alimentación.

• Eliminación de po: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
• Inspección de cables: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
• Verificación ambiental: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.

7 Solución de problemas

If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact XPG customer support for further assistance.

8. Especificacións

9. Garantía e soporte

For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG websitio web ou póñase en contacto directamente co servizo de atención ao cliente.

You can also visit the official XPG Store on Amazon for product information and support resources:

Visit the XPG Store on Amazon