Produto rematadoview
The SCUF Envision Pro is engineered to provide PC gamers with an unparalleled controller experience. It features advanced customization options, ultra-fast connectivity, and responsive mechanical buttons for competitive gameplay.
Imaxe: Anverso e reverso view of the SCUF ENVISION PRO Wireless PC Gaming Controller in Steel Gray.
O que hai na caixa
Image: Contents of the SCUF ENVISION PRO Controller box, including the controller, USB wireless receiver, USB-C cable, extra thumbsticks, SAX button blanks, inner paddle blanks, and paddle removal tool.
- SCUF ENVISION PRO Wireless PC Gaming Controller
- Receptor sen fíos USB
- Braided 1m USB-C Cable
- 1x Short Domed Thumbstick
- 1x Tall Domed Thumbstick
- 2x SAX Button Blanks
- 2x Inner Paddle Blanks
- Inner Paddle Removal Tool
- Adaptador USB-A a USB-C
Configuración
Initial Connection & iCUE Software
To begin, connect your SCUF Envision Pro controller to your PC using the provided USB-C cable. For the Envision Pro model, ensure the controller is in wired mode. The iCUE software is essential for initial setup and full customization.
- Download and install the latest version of the iCUE software from the official SCUF or Corsair websitio.
- Launch iCUE. Your controller should be detected automatically.
- Confirm your controller's firmware is up to date within the iCUE settings.
Image: Screenshot of the iCUE software interface showing the SCUF ENVISION PRO controller and customization options.
Calibración do controlador
Calibration ensures optimal performance of your controller's triggers and thumbsticks. It is recommended to perform calibration if you experience any input inconsistencies.
No official seller videos for calibration were found. Please refer to the iCUE software for detailed instructions.
- Connect the controller to your PC via USB-C cable. Ensure it is in wired mode.
- Open iCUE and select your SCUF Envision Pro controller.
- Navigate to the "Calibration" section in the sidebar.
- Toggle "Device Memory Mode" off.
- Click "Run Wizard" to start the calibration process.
- Follow the on-screen prompts to calibrate triggers and thumbsticks. Do not unplug or switch modes during this process.
- For triggers, ensure they are in full pull mode (not instant) before starting calibration.
- For thumbsticks, move them in cardinal directions (up, down, left, right) and allow them to rest for 2 seconds in the center before moving to the next direction.
- Once all steps are complete, click "Finish" to save the calibration data.
Operating Your Controller
The SCUF Envision Pro offers extensive customization to enhance your gaming experience.
Remappable Inputs
Image: Diagram highlighting the 11 additional remappable inputs on the SCUF ENVISION PRO controller.
- G-Keys: Five fully remappable G-Keys are located on the front of the controller, allowing for advanced macros and integration with Corsair iCUE.
- Remas para as costas: Four rear, remappable paddles enable you to keep your thumbs on the sticks for faster reactions, crucial for competitive play.
- SAX Buttons: Two unique side-mounted SAX buttons provide additional configurability, designed for natural finger placement.
Imaxe: Primeiro plano view of the 5 programmable G-Keys on the SCUF ENVISION PRO controller.
Imaxe: View of the remappable back paddles on the SCUF ENVISION PRO controller, labeled P1, P2, P3, P4.
Instant Triggers & Mechanical Switches
Image: Diagram illustrating the difference between an instant trigger and a regular trigger on the SCUF ENVISION PRO controller.
- Instant Triggers: Adjustable Instant Triggers allow you to quickly switch between mouse-like clicks for rapid firing and a full trigger range for precise control.
- OMRON Mechanical Switches: The OMRON mechanical ABXY and D-Pad buttons provide crisp and responsive clicks, similar to a mouse click, for instant activations.
Imaxe: Primeiro plano view of the ABXY buttons and D-Pad, highlighting the mouse-like mechanical switches.
iCUE Customization
iCUE software unlocks the full potential of your Envision Pro controller, allowing for deep personalization.
- Map fully configurable inputs to any PC shortcut.
- Customize your RGB Lighting Strip to match your gaming setup.
- Tailor your thumbstick and trigger response curves for optimal performance in different games.
Image: Screenshot showing the iCUE software interface for customizing thumbstick response curves.
Mantemento
To ensure the longevity and optimal performance of your SCUF Envision Pro controller, follow these maintenance guidelines:
- Keep the controller clean by wiping it regularly with a dry, soft cloth. Avoid abrasive cleaners or solvents.
- Garde o controlador nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- Handle the controller with care to prevent drops or impacts that could damage internal components.
- Periodically check for and install firmware updates via iCUE to ensure the best performance and compatibility.
Resolución de problemas
If you encounter issues with your SCUF Envision Pro controller, consider the following troubleshooting steps:
| Problema | Posible Solución |
|---|---|
| Controller not responding or input lag in wireless mode. | Ensure the USB Wireless Receiver is securely plugged into your PC. Try a different USB port. Minimize interference from other wireless devices. Ensure iCUE software is running and updated. |
| Firmware update fails or controller malfunctions after update attempt. | Ensure a stable wired connection during firmware updates. Do not unplug or switch modes. Restart iCUE and try again. If issues persist, perform a factory reset (refer to iCUE documentation for specific steps) or contact SCUF support. |
| Buttons or thumbsticks not registering inputs correctly. | Perform a controller calibration through the iCUE software (refer to the Setup section). Ensure no debris is obstructing button movement. |
| Controller randomly stops working or behaves erratically. | If wired, try unplugging and replugging the USB-C cable. If wireless, ensure the battery is charged and the wireless receiver is functioning correctly. Check iCUE for any reported conflicts or errors. |
Especificacións
- Número de modelo: 601-178-03-102-NA
- Conectividade: Ultra-fast wired/wireless (Corsair SlipStream)
- Entradas: 11 additional remappable inputs (5 G-Keys, 2 SAX buttons, 4 rear paddles)
- Botóns: OMRON mechanical ABXY and D-Pad buttons
- Disparadores: Adjustable Instant Triggers (switch between mouse-like clicks and full range)
- Compatibilidade: PC Only (Windows)
- Software: iCUE Compatible (required for initial setup and customization)
- Dimensións: 6.5 x 4.23 x 2.5 polgadas
- Peso: 10.05 onzas
- Batería: 1 batería de iones de litio (incluída)
- Data de lanzamento: 25 de xaneiro de 2024
- Fabricante: corsario
- País de orixe: China
Garantía e Soporte
SCUF provides a limited warranty for its products. For detailed warranty information, product support, and service requests, please visit the official SCUF websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.
Official SCUF Store: SCUF Store on Amazon