Configuración
Interruptor de selección de modo
The FLYDIGI Direwolf 2 controller features a mode selection switch located on the back. This switch allows you to easily toggle between different connection modes: 2.4 GHz Dongle, Bluetooth, and Nintendo Switch (NS).
Image: Back of the Direwolf 2 controller with the mode selection switch clearly visible.
Conexión por cable
For a stable and low-latency connection, you can connect the controller directly via USB-C cable.
- PC: Set the mode switch to the dongle position. Connect the USB-C cable to the controller and your PC.
- Nintendo Switch: Set the mode switch to the NS position. Connect the USB-C cable to the controller and your Switch dock.
Image: Direwolf 2 controller with the USB-C port visible, indicating wired connection capability.
2.4 GHz Dongle Connection
For wireless connection with optimal performance, use the provided 2.4 GHz dongle.
- PC/Android/Fire TV: Set the mode switch to the dongle position. Plug the 2.4 GHz dongle into a USB port on your device. Hold down the Home button on the controller to connect. If the dongle does not connect immediately, use a pin to press the pinhole button on the dongle until it pairs.
Vídeo: Un overview of the Flydigi Direwolf 2 controller, demonstrating its features and unboxing process.
Conexión Bluetooth
Connect wirelessly to compatible devices using Bluetooth.
- PC/Android/Fire TV: Set the mode switch to the Bluetooth position. Hold down the Home button on the controller to enter pairing mode. On your device, search for and connect to