Información importante de seguridade
Read this instruction manual carefully before use to ensure safe operation and prevent damage to the product or injury.
This product is not a toy and should be operated with caution. Keep out of reach of small children. Always ensure proper battery installation and disposal. Do not expose the device to moisture or extreme temperatures.
Produto rematadoview
An image showing the Absima CR9T RC Pistol Transmitter, a black and grey device with a screen displaying numerical information and a large steering wheel on the right side. The handle is ergonomically designed for grip.
The Absima CR9T is a 2.4 GHz 9-channel RC pistol transmitter designed for precise control of remote-controlled vehicles. It features an ergonomic design, a clear display for settings, and intuitive controls for an enhanced user experience.
Configuración
- Instalación da batería: Open the battery compartment cover located at the bottom of the transmitter. Insert the required batteries (not included) according to the polarity indicators. Close the cover securely.
- Vinculación do receptor: Refer to your receiver's manual for specific binding instructions. Generally, power on the receiver in binding mode, then power on the transmitter while holding the bind button (if applicable).
- Calibración inicial: After binding, perform a basic calibration of the steering and throttle channels to ensure proper response.
Instrucións de funcionamento
- Encendido/apagado: Press and hold the power button until the display illuminates/shuts off.
- Control da dirección: Use the steering wheel on the right side to control the vehicle's direction.
- Control do acelerador: Use the trigger for forward and reverse movement. Pull for forward, push for reverse.
- Asignación de canles: Utilize the various switches and knobs on the transmitter to control auxiliary channels (e.g., lights, winches) as configured on your receiver.
- Mostrar navegación: Use the navigation buttons around the screen to access and adjust settings such as trim, EPA (End Point Adjustment), D/R (Dual Rate), and model memory.
Mantemento
- Limpeza: Use a soft, dry cloth to clean the transmitter. Do not use harsh chemicals or solvents.
- Almacenamento: Garde o transmisor nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas. Retire as pilas se o garda durante períodos prolongados.
- Coidado da batería: Always use fresh batteries of the recommended type. Do not mix old and new batteries or different battery types.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O transmisor non se acende | Baterías agotadas ou mal instaladas | Substituír as pilas; comprobar a polaridade |
| Sen resposta de control do vehículo | Not bound to receiver; receiver not powered; out of range | Re-bind transmitter and receiver; check receiver power; move closer to vehicle |
| Erratic control | Interference; low battery on transmitter/receiver | Move to a different location; replace batteries |
Especificacións
| Característica | Detalle |
|---|---|
| Dimensións do produto | 14 x 10 x 18.5 cm |
| Peso | 320 g |
| Número de modelo do artigo | 2000012 |
| Número de elementos | 1 |
| Requírense baterías? | No (for product, but required for operation) |
| Pilas incluídas? | Non |
| ASIN | B0CP34F5K2 |
| Primeira data dispoñible | 24 de abril de 2024 |
Garantía e Soporte
We understand that it can be frustrating if a product does not work properly or becomes defective. Fortunately, we provide a warranty for a period of at least 2 years after purchase.
For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Absima website. Please have your model number (2000012) and proof of purchase ready when contacting support.
