Introdución
Thank you for choosing the Ledagic 100ft RGB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read it thoroughly before installation and operation.
These LED strip lights offer vibrant color-changing capabilities, music synchronization, and convenient control via a 60-key remote or a dedicated mobile application. They are designed for indoor use to enhance the ambiance of bedrooms, living rooms, and other indoor spaces.
Contido do paquete
- 1 x 100ft LED Strip Lights
- 1 x controlador
- 1 x mando a distancia de 60 teclas
- 1 x adaptador de alimentación
- 1 x manual de instrucións
Precaucións de seguridade
- This product is for indoor use only. It is not waterproof.
- Asegúrese de que a fonte de alimentación estea desconectada antes da instalación ou mantemento.
- Do not connect the LED strip to the power supply while it is still rolled on the reel to prevent overheating.
- Avoid bending the LED strip at sharp angles to prevent damage to the circuit.
- Manter fóra do alcance dos nenos.
- Use só o adaptador de alimentación proporcionado.
Instrucións de configuración
- Prepare a superficie: Ensure the surface where you plan to install the LED strip is clean, dry, and smooth. Dust or uneven surfaces can affect adhesive performance.
- Medir e cortar (opcional): If necessary, measure the desired length for your installation. The LED strip can be cut along the designated cutting lines (marked with a scissor icon) to fit your space.
- Coloque a tira LED: Carefully peel off the adhesive backing from the LED strip. Press the strip firmly onto the prepared surface, ensuring good contact along its entire length.
- Conecta o controlador: Connect the LED strip to the controller. Ensure the arrows on the strip and controller align correctly.
- Conecte o adaptador de alimentación: Connect the power adapter to the controller, then plug the adapter into a standard electrical outlet.
- Remove Remote Insulation: Before using the 60-key remote control, remove the clear plastic insulation tab from the battery compartment.
Instrucións de funcionamento
A. Control remoto
The included 60-key remote control allows for basic functions:
- Encendido/apagado: Usa os botóns específicos para acender ou apagar as luces.
- Selección de cor: Choose from a wide range of preset colors.
- Axuste de brillo: Aumentar ou diminuír a intensidade da luz.
- Selección de modo: Select various dynamic modes such as flashing, breathing, strobe, or gradient effects.
B. App Control (HiLighting App)
For advanced features and customization, download the HiLighting aplicación desde a tenda de aplicacións do teu teléfono intelixente.
- Descarga a aplicación: Scan the QR code on the controller or search for "HiLighting" in your app store.
- Activar Bluetooth: Asegúrate de que o Bluetooth estea activado no teu dispositivo móbil.
- Conectar dispositivo: Open the HiLighting app. The app should automatically detect the LED strip lights. Follow the in-app instructions to connect.
- Personalizar a configuración: Unha vez conectado, podes:
- Select from 16 million colors.
- Adjust brightness and saturation.
- Create custom lighting modes.
- Utilize the Music Sync feature.
- Set up Timing Mode.
C. Music Sync Mode
The built-in high-sensitivity microphone allows the lights to change color and rhythm with music or sound, creating an immersive atmosphere.
- Activate Music Sync via the remote or app.
- Adjust microphone sensitivity in the app for optimal response.
D. Timing Mode
Set a schedule for your LED lights to automatically turn on or off at specific times with desired colors.
- Access the Timing Mode feature within the HiLighting app.
- Set desired on/off times and select preferred colors for each schedule.
Mantemento
- Limpeza: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Almacenamento: If storing the lights for an extended period, ensure they are clean and dry. Roll them loosely on the original reel or a similar spool to prevent damage.
- Adhesivo: The adhesive is designed for single application. Re-applying may reduce stickiness.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| As luces non se acenden. | Power connection issue, remote battery dead, app not connected. | Check all connections. Replace remote battery. Ensure app is connected via Bluetooth. |
| O control remoto/a aplicación non responde. | Obstruction between remote and IR receiver, Bluetooth disconnected. | Ensure clear line of sight for IR remote. Reconnect Bluetooth in the app. |
| Lights are dim or inconsistent. | Low power, damaged section of strip. | Ensure power adapter is correctly connected. Inspect strip for physical damage. |
| O adhesivo non se pega. | Surface not clean/smooth, re-application. | Clean and dry surface thoroughly. Use additional mounting clips if needed. |
Especificacións
| Característica | Detalle |
|---|---|
| Marca | Ledagic |
| Número de modelo | Led-rgb001-1 |
| Lonxitude | 100 pés |
| Cor clara | RGB (Color Changing) |
| Método de control | Control de aplicacións, control remoto |
| Características especiais | Corded, Color Changing, Dimmable, Timer, Automatic On-Off, Music Sync |
| Uso interior/exterior | Interior |
| Fonte de enerxía | AC |
| Voltage | 24 voltios |
| Material | Cobre, plástico |
| Peso do elemento | 8.5 onzas (0.24 quilogramos) |
Garantía
Specific warranty details for this product are not provided in the available information. Please refer to the product packaging or the manufacturer's official websitio web para consultar os termos e condicións completos da garantía.
Apoio
For any questions, issues, or support needs regarding your Ledagic LED Strip Lights, please refer to the contact information provided on the product packaging or visit the official Ledagic website. You may also find additional resources and FAQs on their support page.
For app-related inquiries, please visit the HiLighting app support page.