deli 4V Cordless Electric Screwdriver

Introdución

Thank you for choosing the deli 4V Cordless Electric Screwdriver. This powerful and versatile tool is designed for various tasks, including light fixtures, home furnishings, electronics, and general repairs. Featuring a 3.6V rechargeable battery with a 1500mAh capacity, USB-C charging, and a high 5 N.m torque, this screwdriver offers efficiency and convenience for everyday use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting. Please read it thoroughly before using the product.

Instrucións de seguridade

Siga sempre as precaucións de seguridade básicas ao usar ferramentas eléctricas para reducir o risco de incendio, descarga eléctrica e lesións persoais.

• Manter limpa a zona de traballo: As áreas desordenadas invitan a feridas.
• Evite ambientes perigosos: Non use ferramentas eléctricas en damp ou lugares húmidos, ou expoñelos á choiva. Manter a zona de traballo ben iluminada.
• Mantén os nenos lonxe: Todos os visitantes deben manterse a unha distancia segura da zona de traballo.
• Vístete correctamente: Do not wear loose clothing or jewelry. They can be caught in moving parts. Wear non-slip footwear. Wear hair covering to contain long hair.
• Use protección ocular: Use sempre lentes de seguridade.
• Traballo seguro: Use clamps or a vise to hold work when practical. It's safer than using your hand and frees both hands to operate the tool.
• Non sobrepasar: Manteña a posición correcta e o equilibrio en todo momento.
• Manter as ferramentas con coidado: Mantén as ferramentas afiadas e limpas para un rendemento mellor e máis seguro. Siga as instrucións para lubricar e cambiar os accesorios.
• Ferramentas de desconexión: Disconnect the tool from the power source before servicing, when changing accessories, or when not in use.
• Evitar o arranque accidental: Asegúrese de que o interruptor estea na posición de apagado antes de conectar.
• Comprobar as pezas danadas: Antes de seguir empregando a ferramenta, débese revisar coidadosamente un protector ou outra parte danada para determinar que funcionará correctamente e cumprirá a función prevista.
• Usar o accesorio correcto: Do not use accessories not specifically designed for this tool.
• Never Force the Tool: Fará o traballo mellor e máis seguro ao ritmo para o que foi deseñado.

Contido do paquete

Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete. Se falta algún elemento ou está danado, póñase en contacto co servizo de atención ao cliente.

• deli 5 N.m Power Screwdriver (Model EDL-DP04-E3B1)
• 10x S2 Alloy Steel Bits
• 1x 60mm Magnetic Extension Rod
• 1 cable de carga USB-A a USB-C
• 1 x Manual de usuario

Image: The deli electric screwdriver shown with its complete set of accessories, including the 10 S2 steel bits, magnetic extension rod, and USB-C charging cable.

Produto rematadoview

Familiarize yourself with the components and features of your deli electric screwdriver.

Image: A detailed diagram highlighting the key components of the deli electric screwdriver, including the magnetic chuck, circular LED light, two-way start button, 1500mAh battery, USB-C fast charging port, and its ergonomic design.

• Magnetic Chuck: Suxeita con seguridade as puntas de desaparafusador.
• Circular LED Light: Illuminates the work area, especially useful in narrow or dimly lit spaces.
• Two-Way Start Button: Allows for easy forward and reverse rotation with a single control.
• Batería de 1500 mAh: High-capacity lithium-ion battery for extended use.
• USB-C Fast Charging Port: Interface de carga cómoda e moderna.
• Ergonomic and Minimalist Design: Provides a comfortable and secure grip for safe operation.

Configuración

1. Carga do destornillador

Before first use, fully charge the screwdriver's internal battery.

1. Locate the USB-C charging port on the bottom of the screwdriver handle.
2. Conecta o cable de carga USB-A a USB-C fornecido ao destornillador.
3. Plug the USB-A end of the cable into a compatible USB power adapter (not included), computer USB port, or power bank.
4. The charging indicator light (if present, typically near the charging port) will illuminate to show charging status. Refer to the indicator behavior for full charge status.
5. A full charge can power the screwdriver to drive approximately 300 screws.

Image: The deli electric screwdriver being charged via its USB-C port, demonstrating its compatibility with various USB power sources such as laptops, wall adapters, and power banks.

Imaxe: Un exemplo ilustrativo view of the screwdriver's internal battery, highlighting its 1500mAh capacity and the capability to drive up to 300 screws per charge.

2. Instalación das puntas do destornillador

The screwdriver uses a magnetic chuck for quick and secure bit changes.

1. Select the appropriate S2 alloy steel bit for your task from the included set.
2. Insert the hex end of the bit directly into the magnetic chuck at the front of the screwdriver. The magnetic chuck will hold the bit firmly in place.
3. For hard-to-reach areas, first insert the selected bit into the 60mm magnetic extension rod, then insert the extension rod into the screwdriver's magnetic chuck.
4. Para retirar unha peza, simplemente tíraa directamente do mandril.

Image: The deli electric screwdriver positioned next to its assortment of S2 steel bits and the extension rod, illustrating the circular LED light at the front.

Instrucións de funcionamento

1. Powering On and Direction Control

The screwdriver features an innovative two-way start button for intuitive operation.

• To drive screws (forward rotation), press the "R" (Right/Forward) side of the two-way button.
• To remove screws (reverse rotation), press the "L" (Left/Reverse) side of the two-way button.
• Solte o botón para deter o destornillador.

Imaxe: Primeiro plano view of the screwdriver's yellow two-way start button, clearly marked with 'L' for reverse and 'R' for forward rotation.

2. Uso da luz LED

The screwdriver is equipped with a circular LED light that automatically illuminates when the screwdriver is in operation.

• The three LEDs form a ring light strip around the chuck, providing clear visibility of your work area.
• This feature is particularly useful when working in dimly lit conditions or in confined spaces.

Image: The deli electric screwdriver with its circular LED light activated, illustrating how it illuminates the work area, especially in tight or dark spots.

Mantemento

• Limpeza: Regularly wipe the screwdriver body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the tool.
• Coidado das brocas: Keep the S2 steel bits clean and free from debris. Store them in a dry place to prevent rust. Replace worn or damaged bits to ensure optimal performance and prevent damage to screw heads.
• Almacenamento da batería: If storing the screwdriver for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Avoid storing it in extreme temperatures. Recharge periodically to maintain battery health.
• Inspección xeral: Periodically check the screwdriver for any signs of damage, loose parts, or wear. Do not operate a damaged tool.

Resolución de problemas

Especificacións

Garantía e Soporte

For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: deli

For further assistance, you may visit the official deli store online: deli Official Store