RGB Safe Accu 2 Blood Glucose Monitor

1. Introdución

The RGB Sinocare Safe Accu 2 Blood Glucose Monitor is designed for regular monitoring and screening of blood glucose levels. This device incorporates advanced technology to ensure accuracy and safety in home-based blood sugar testing. It features a user-friendly interface with a result indicator that uses green and red lights to signal low, high, and normal test results. The system also provides average result readings for 7, 14, and 28 days, aiding in comprehensive glucose management. A strip ejector is included for contactless strip removal, enhancing hygiene and convenience.

Image: The complete RGB Safe Accu 2 Blood Glucose Monitor kit, including the meter, test strips, lancets, lancing device, and carry case.

2. Información de seguridade

Please read all instructions carefully before using the RGB Safe Accu 2 Blood Glucose Monitor. Proper use is essential for accurate results and safe operation.

• Este dispositivo está destinado a in vitro diagnostic use only. Do not use for diagnosis of diabetes without consulting a healthcare professional.
• Manteña o dispositivo e todos os accesorios fóra do alcance dos nenos.
• Store test strips in their original vial and keep the cap tightly closed. Do not use expired test strips.
• Dispose of used lancets and test strips properly in a sharps container to prevent injury and contamination.
• Consult your healthcare provider for interpretation of results and for any medical concerns.
• Indicacións: This device is indicated for individuals with diabetes mellitus for self-monitoring of blood glucose levels.

3. Contido do paquete

The RGB Sinocare Safe Accu 2 Blood Glucose Monitor kit comes with the following components:

• Medidor RGB Sinocare Safe Accu 2
• 10 RGB Sinocare Safe Accu2 Test Strips
• 10 lancetas
• 1 Dispositivo de punción
• 2 pilas AAA (incluídas)
• Maletín de transporte

Image: A visual representation of the kit contents, clearly labeling the meter, test strips, lancets, lancing pen, and carry case.

4. Configuración

1. Instalar baterías: Open the battery compartment on the back of the meter. Insert the two AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Set Up Lancing Device:
   • Desenrosque a tapa do dispositivo de punción.
   • Insira firmemente unha lanceta nova no soporte da lanceta.
   • Twist off the protective cap of the lancet.
   • Volva colocar a tapa do dispositivo de lanceta.
   • Adjust the penetration depth by rotating the cap (refer to the markings on the device for appropriate depth).
   • Tire do control de amartillaxe ata que faga clic, o que indica que está listo para usar.
3. Preparar a tira de proba: Remove one test strip from the vial. Immediately close the vial cap tightly to protect remaining strips from moisture.

5. Instrucións de funcionamento

Siga estes pasos para realizar unha proba de glicosa no sangue:

1. Inserir tira de proba: With the meter off, insert the test strip into the strip port. The meter will automatically turn on and display a blood drop symbol, indicating it is ready for a blood sample.
2. Obter sangue SampLe:
   • Lava ben as mans con auga morna e xabón e logo sécaas completamente.
   • Choose a clean fingertip.
   • Place the lancing device firmly against the chosen fingertip and press the release button.
   • Gently squeeze the finger to obtain a small drop of blood. The meter requires only 0.6 µL of blood sample.
3. Aplicar sangue SampLe: Touch the tip of the test strip to the blood drop. The strip will draw the blood into the reaction area automatically. Do not apply blood to the top of the strip.
4. Ler resultados: The meter will begin a countdown. Your blood glucose result will appear on the display in approximately 10 seconds. The meter has a wide test range from 20 to 600 mg/dL.
5. Interpretar os resultados: The RGB Safe Accu 2 features a result indicator with green and red lights.
   • Luz verde: Indicates a normal blood glucose level.
   • Luz vermella: Indicates a low or high blood glucose level, requiring attention.
   The meter also stores up to 200 test results and provides average readings for 7, 14, and 28 days.
6. Tira de expulsión: Use the strip ejector button to safely remove the used test strip without touching it. Dispose of the strip and lancet in a suitable sharps container.

Image: The RGB Safe Accu 2 meter displaying a reading, alongside a blood glucose indicator card showing ranges for low, normal, borderline, high, and dangerous levels. The display also shows memory for 7, 14, and 28-day results.

Image: Detailed specifications for the test strips, highlighting the FAD-GDH System, the minimal 0.6 µL blood sample requirement, the 20-600 mg/dL test range, and the swift 10-second test time.

6. Mantemento

• Limpeza: Limpe o exterior do medidor cun pano suave eamp pano. Non mergulle o medidor en auga nin empregue produtos de limpeza agresivos.
• Almacenamento: Store the meter and test strips in the provided carry case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the test strip vial is tightly capped after each use.
• Substitución da batería: Substitúa as pilas cando apareza o indicador de pila baixa na pantalla.
• Eliminación: Dispose of used batteries, test strips, and lancets according to local regulations.

7 Solución de problemas

8. Especificacións

9. Garantía e soporte

O monitor de glicosa en sangue RGB Sinocare Safe Accu 2 inclúe... garantía de por vida for the meter, ensuring long-term reliability and support. The test strips have a shelf life of 2 years, and the monitor itself has a 5-year shelf life.

For any queries, technical assistance, or warranty claims, please contact: