1. Introdución
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Información de seguridade
ADVERTENCIA: Risco de descarga eléctrica. Desconecte a alimentación no fusible ou no disyuntor antes da instalación ou do mantemento.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Installation should be performed by a qualified electrician or a person with electrical knowledge.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Do not install near flammable materials or in areas with explosive atmospheres.
- Do not look directly into the LED light source when illuminated, as it may cause eye damage.
- Asegúrate de que a superficie de montaxe poida soportar o peso da luminaria.
3. Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- LED Security Light Fixture (Model BDB100G-3)
- Ferraxes de montaxe (parafusos, porcas para cables)
- Manual de instrucións
4. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | BDB100G-3 |
| Wattage | 100 W |
| Brillo | 9000 lúmenes |
| Temperatura da cor | 6000K (Branco de luz do día) |
| Voltage | 120 voltios |
| Ángulo do sensor de movemento | 180° |
| Rango de detección de movemento | 5 m - 22 m |
| Axuste do tempo de iluminación | 10 segundos - 7 minutos |
| Clasificación de resistencia á auga | IP65 |
| Material | Die-cast Aluminum, Plastic |
| Dimensións (L x W x H) | 15.3" x 8.2" x 4.7" (38.8 cm x 20.8 cm x 11.9 cm) |
| Peso | 4.4 libras (2 kg) |
| Tipo de montaxe | Soporte de parede e soporte de sofito |
| Ideal Mounting Height | 3 m - 5 m |
5. Configuración e instalación
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Compoñentes anterioresview
Imaxe 5.1: Explosión view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Montaxe do aparello
- Prepare a superficie de montaxe: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view da área de detección desexada.
- Fixar o soporte de montaxe: Secure the provided mounting bracket to the junction box using the included screws.
- Conexións de cableado: Connect the household wiring to the fixture's wires. Typically, this involves:
- Negro (En directo) a Negro (En directo)
- Branco (Neutro) a Branco (Neutro)
- Green/Bare Copper (Ground) to Green (Ground)
- Asegure o accesorio: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Axuste das cabezas de luz e do sensor
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Instrucións de funcionamento
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Configuración do sensor de movemento
O sensor de movemento ten tres diales axustables:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCIA (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- HORA: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Determines the ambient light level at which the sensor becomes active.
- Modo de día (icona do sol): Motion detection works during both day and night.
- Modo nocturno (icona da lúa): A detección de movemento só funciona pola noite ou en condicións de pouca luz.
6.2 Rendemento óptimo
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Mantemento
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Limpeza
- Asegúrese de que a alimentación estea apagada antes de limpar.
- Limpe a luminaria cun pano suave eamp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
- Manteña a lente do sensor de movemento limpa e libre de obstrucións (por exemplo, sucidade, arañaswebs) para garantir o seu correcto funcionamento.
7.2 Resistencia ás inclemencias meteorolóxicas
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
8 Solución de problemas
If you experience issues with your security light, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | Sen fonte de alimentación. LUX setting is too low (Night Mode during daytime). Sensor de movemento obstruído ou avariado. | Comprobe o disxuntor e as conexións do cableado. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| A luz permanece acesa continuamente. | Movemento continuo na área de detección. O axuste de TIME é demasiado longo. Mal funcionamento do sensor. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Axuste o dial TIME a unha duración máis curta. Se o problema persiste, póñase en contacto co servizo de atención ao cliente. |
| Light turns on too frequently or not enough. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| A saída de luz é tenue ou inconsistente. | Flutuación de potencia. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Montaxe solta. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Garantía
This Onforu product is covered by a 2 ano de garantía limitada desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal. Non cobre danos resultantes dunha instalación incorrecta, accidentes, mal uso, abuso ou modificacións non autorizadas.
Conserve o comprobante de compra para reclamacións de garantía.
10. Atención ao cliente
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu websitio para información de contacto.
Soporte en liña: Visita a tenda Onforu en Amazon
