AMPBANK AB2000 2000A Portable Jump Starter User Manual

1. Produto rematadoview

O AMPBANK AB2000 is a powerful and portable jump starter designed to start 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines. It also functions as a portable power bank and features an ultra-bright LED flashlight for emergency situations.

Imaxe: A AMPBANK AB2000 Portable Jump Starter, highlighting its 2000A peak current, compatibility with 12V vehicles, and capacity for up to 8.0L gas and 6.0L diesel engines.

2. Información de seguridade

Always read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Keep the jump starter power above 50% for optimal starting efficiency.
• Non empregue o arrancador se os cables ou o clamps están danadas.
• Asegúrese de conectar a polaridade correcta (clavija vermella)amp a positivo, negro clamp a negativo).
• Evitar curtocircuítos no clamps.
• Do not expose the device to water, rain, or extreme temperatures.
• Manter fóra do alcance dos nenos.
• O AMPBANK jump starter incorporates 8 safety protections: anti-spark, anti-overcharge, anti-short circuit, anti-reverse connection, anti-surge, reverse polarity protection, over-discharge protection, and over-voltage protección.

Imaxe: Representación visual do AMPBANK AB2000's 8 built-in safety protections, ensuring safe operation.

3. Que hai na caixa

Desembala coidadosamente todos os artigos e asegúrate de ter recibido o seguinte:

• AMPBANK AB2000 Car Jump Starter (x1)
• Cable de arranque con Smart Clamps (x1)
• Cable de carga USB tipo C (x1)
• Manual de usuario (x1)
• EVA Carrying Case (x1)

Image: All components included in the AMPBANK AB2000 package, neatly arranged.

4. Características e compoñentes do produto

Familiarize yourself with the key features and ports of your AMPBANK AB2000 jump starter:

• Power Button/Battery Indicator: Displays current battery level and turns the device on/off.
• Porto de arranque auxiliar: Connects to the smart jumper cables.
• USB Type-C Input/Output (PD18W): For charging the jump starter and charging other devices.
• USB-A Output (5V/3A): For charging mobile phones, tablets, and other USB-powered devices.
• DC Output (12-16.8V/10A): Para alimentar dispositivos de 12 V CC.
• Linterna LED: Provides illumination with multiple modes (stable, strobe, SOS).

Imaxe: A AMPBANK AB2000 unit, showcasing its design and interface elements.

5. Carga do arrancador de baterías

Before first use, fully charge the AMPBANK AB2000. It is recommended to recharge the jump starter once every three months if not used for a long time to maintain battery health.

1. Connect the provided USB Type-C charging cable to the Type-C input/output port on the jump starter.
2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
3. The battery indicator lights will illuminate and flash during charging. All four lights will be solid when fully charged.

6. Instrucións de funcionamento: Arranque auxiliar dun vehículo

Asegúrate de que o arrancador teña polo menos un 50 % de carga antes de tentar arrincar un vehículo con axuda de baterías.

1. Conectar os cables de arranque: Insert the blue plug of the smart jumper cables into the jump start port on the AMPBANK AB2000. Ensure it is fully seated.
2. Conectar á batería:
   • Adxunta o vermello positivo (+) clamp ao terminal positivo (+) da batería do vehículo.
   • Adxunta o negro cl negativo (-)amp ao terminal negativo (-) da batería do vehículo.

   O intelixente clamp indicator light will show the connection status. A solid green light indicates a correct and ready connection.

3. Arrancar o vehículo: Go into your vehicle and start the engine.
4. Eliminar cables: Unha vez que o vehículo arranque, retire inmediatamente o borne negro negativo (-).amp from the vehicle battery, then remove the red positive (+) clamp. Finally, disconnect the smart jumper cables from the jump starter.

Using "BOOST" Mode for Completely Dead Batteries

If the vehicle battery is completely dead or has very low voltage, the standard jump start procedure might not work. In such cases, use the "BOOST" function:

1. Follow steps 1 and 2 above to connect the jumper cables to the jump starter and the vehicle battery.
2. Manteña premido o botón "BOOST" no reloj intelixenteamp for 3 seconds. The indicator light will turn solid green, indicating "BOOST" mode is active.
3. Immediately start the vehicle within 30 seconds. If the car does not start, the "BOOST" mode will exit, and you will need to repeat the process.
4. Unha vez que o vehículo arranque, retire inmediatamente o borne negro negativo (-).amp, then the red positive (+) clamp, and finally disconnect the smart jumper cables from the jump starter.

Imaxe: A AMPBANK AB2000 connected to a car battery, illustrating the "BOOST" mode button on the smart clamp for starting completely dead batteries.

7. Outras funcións

Banco de enerxía portátil 7.1

The AB2000 can charge various electronic devices:

• USB Type-C (PD18W) & USB-A (5V/3A): Connect your mobile phone, tablet, or other USB-powered devices using their respective charging cables to the appropriate output ports.
• DC Output (12-16.8V/10A): Use this port to power 12V DC devices, such as car vacuum cleaners or tire inflators (ensure compatibility).

Imaxe: A AMPBANK AB2000 functioning as a portable power bank, charging a smartphone and a tablet simultaneously.

7.2 Ultra-Bright LED Light

A lanterna LED incorporada ofrece tres modos para diversas situacións:

1. Para activar/desactivar: Press and hold the flashlight button for 3 seconds.
2. Para cambiar de modo: Short press the flashlight button to cycle through modes: Stable Light → Strobe Light → SOS Signal.

Imaxe: A AMPBANK AB2000's high-power LED flashlight in use, demonstrating its utility for illumination and emergency signaling.

8. Mantemento

• Recargando: If the jump starter is not used for a long time, it is recommended to recharge it once every three months to prolong battery life.
• Limpeza: Usa un pano suave e seco para limpar o dispositivo. Non empregues produtos químicos agresivos nin materiais abrasivos.
• Almacenamento: Store the jump starter in its EVA carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

9 Solución de problemas

10. Especificacións

11. Garantía e soporte

O AMPBANK AB2000 comes with a 1-year quality assurance warranty and a 30-day free refund period. Lifetime free technical support is also provided.

For any questions or support needs, please contact AMPBANK customer service.