Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041) User Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, Model 562041. This device is designed for enterprise networks requiring efficient and scalable routing solutions with high-powered Power over Ethernet (PoE) capabilities.

2. Información de seguridade

Observe the following safety precautions to prevent damage to the device and injury to personnel:

Asegurar a correcta conexión a terra do dispositivo.
Do not expose the switch to water or excessive humidity.
Opere o dispositivo dentro dos rangos de temperatura e humidade especificados.
Use only the power cable provided or a compatible replacement.
Do not open the switch casing; encomende o servizo técnico a persoal cualificado.
Asegúrese de que haxa unha ventilación axeitada arredor do interruptor para evitar o sobrequecemento.

3. Contido do paquete

Verifica que todos os elementos estean presentes no paquete:

Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041)
Cable de alimentación
19" rackmount brackets
Pés de goma
Instrucións (este manual)

4. Produto rematadoview

The Intellinet 562041 is a robust Layer 3 managed switch featuring 48 Gigabit PoE+ ports and six 10G SFP+ uplink slots. It supports a total power budget of 850 watts for PoE devices.

4.1 Panel frontal

**Figura 4.1:** Fronte view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the 48 Gigabit Ethernet ports, six SFP+ slots, and LED indicators on the front panel.

O panel frontal inclúe:

48 x 10/100/1000 Mbps RJ45 Ports: These ports support Power over Ethernet Plus (PoE+) for connecting compatible devices.
6 x 10 Gigabit SFP+ Slots: For high-speed uplink connections to other network devices.
Indicadores LED: Provide status information for power, system, link activity, and PoE status.
Porto da consola: For local management and configuration.

Close-up of SFP+ and Console ports on the Intellinet switch — **Figura 4.2:** Primeiro plano view of the SFP+ uplink ports and the console port on the right side of the switch's front panel. The SYS and PWR LEDs are also visible.

Close-up of LED indicators on the Intellinet switch — **Figura 4.3:** Primeiro plano view of the LED indicators (LED MODE, LINK, PoE) located on the left side of the switch's front panel, above the RJ45 ports.

4.2 Panel posterior

**Figura 4.4:** Traseira view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the power input and cooling fans.

The rear panel typically includes the AC power input and cooling fans for heat dissipation.

Traseira view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch with warning label — **Figura 4.5:** Traseira view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, highlighting the power input, cooling fans, and a warning label regarding proper grounding.

5. Configuración

5.1 Instalación física

O conmutador pódese instalar nun rack de equipos estándar de 19 polgadas ou colocarse nun escritorio.

Instalación en rack: Attach the provided rackmount brackets to the sides of the switch using the included screws. Secure the switch into a standard 19-inch rack.
Instalación de escritorio: Attach the provided rubber feet to the bottom of the switch to prevent scratching and ensure stability. Place the switch on a flat, stable surface.

5.2 Conexión de alimentación

Connect the provided power cable to the AC power input on the rear panel of the switch and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting the power cable.

5.3 Conexións de rede

Dispositivos PoE: Connect PoE-compatible devices (e.g., IP cameras, VoIP phones, wireless access points) to any of the 48 Gigabit RJ45 ports. The switch will automatically detect and provide power to these devices.
Conexións de enlace ascendente: Insert compatible SFP+ transceivers into the 10 Gigabit SFP+ slots and connect them to your core network or other high-speed devices using appropriate fiber optic cables.
Conexión de consola: For initial configuration or direct management, connect a console cable from your computer to the console port on the switch.

5.4 Configuración inicial

Refer to the separate software configuration guide for detailed instructions on accessing the switch's management interface (web-based GUI or command-line interface via console port) and performing initial setup, including IP address assignment, user accounts, and basic network settings.

6. Instrucións de funcionamento

6.1 Layer 3 Routing

This switch offers dynamic Layer 3 IP routing capabilities, including OSPF (Open Shortest Path First), RIP (Routing Information Protocol), and VRRP (Virtual Router Redundancy Protocol). These protocols enable efficient and scalable routing within complex network environments.

Diagram illustrating Layer 3 features like OSPF, RIP, VRRP, 6x10G SFP+, and 850W PoE — **Figura 6.1:** Acabadoview of the switch's Layer 3 capabilities, including OSPF, RIP, VRRP, 6x10G SFP+ uplinks, and an 850W PoE budget.

6.2 Alimentación por Ethernet (PoE+)

The switch provides up to 30 watts of power per port across its 48 PoE+ ports, with a total power budget of 850 watts. This allows for seamless integration of various PoE devices without the need for separate power adapters.

Diagram showing power consumption examples for various PoE devices — **Figura 6.2:** Examples of power consumption for various PoE devices, categorized by 802.3af (15W), 802.3at (30W), and 802.3bt (60W, 90W) standards.

6.3 PoE Scheduling

The switch supports PoE scheduling, allowing administrators to define specific times for powering on, powering off, or rebooting connected PoE devices. This feature can optimize power consumption and enhance network security.

Diagram illustrating PoE scheduling for various devices — **Figura 6.3:** Illustration of PoE scheduling, showing how power can be scheduled to turn off, reboot, or turn on for different devices on specific days and times.

PoE scheduling timeline example — **Figura 6.4:** A timeline example demonstrating how PoE scheduling can save power by turning off devices during non-business hours.

6.4 Self-Healing Functionality (PDM)

The Powered Device Monitor (PDM) feature enables the switch to proactively monitor the status of connected PoE devices. If a device becomes unresponsive, the PDM can automatically restart the PoE port to restore functionality, minimizing downtime and maintaining network integrity.

6.5 Xestión da nube

The switch supports cloud management capabilities, allowing for remote configuration, monitoring, and troubleshooting of the device from a centralized platform. Refer to the cloud management documentation for setup and usage details.

7. Mantemento

7.1 Actualizacións de firmware

Regularly check the Intellinet Network Solutions website for the latest firmware updates. Applying firmware updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

7.2 Limpeza

To clean the switch, power it off and disconnect all cables. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.

7.3 Consideracións ambientais

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in direct sunlight, near heat sources, or in areas with high dust accumulation.

8 Solución de problemas

Esta sección aborda problemas comúns que podes atopar co conmutador.

8.1 Sen enerxía

Verify the power cable is securely connected to both the switch and a working electrical outlet.
Asegúrese de que o interruptor de alimentación do panel traseiro estea na posición de acendido.
Comprobe a toma de corrente con outro dispositivo para confirmar que funciona.

8.2 No Link on a Port

Comprobe a conexión do cable Ethernet en ambos extremos. Asegúrese de que estea ben conectado.
Verify the cable is not damaged. Try a different cable.
Asegúrate de que o dispositivo conectado estea acendido e funcione correctamente.
Check the port status in the switch's management interface.

8.3 O dispositivo PoE non recibe enerxía

Confirm the connected device is a PoE-compatible device.
Comprobe o LED de estado de PoE para o porto específico.
Verify the total PoE power budget (850W) is not exceeded by all connected devices.
Utilize the Powered Device Monitor (PDM) feature to automatically restart the port if the device is unresponsive.
Check PoE settings in the switch's management interface.

9. Especificacións

Característica	Especificación
Número de modelo	562041
Marca	SOLUCIÓNS DE REDE INTELLINET
Número de portos	54 (48 x Gigabit PoE+, 6 x 10G SFP+)
Tipo de interface	PoE, SFP
Potencia máxima (orzamento PoE)	850 vatios
Taxa de transferencia de datos	10 Gigabits Per Second (SFP+ uplinks)
Peso do elemento	6.2 quilogramos (13.64 libras)
Dimensións do produto (L x W x H)	13.78 x 17.32 x 1.73 polgadas
Clasificación de temperatura superior	104 graos Fahrenheit (40 °C)
Clasificación de temperatura máis baixa	32 graos Fahrenheit (0 °C)
Dispositivos compatibles	Desktop, Router, PoE devices (IP cameras, VoIP phones, WAPs)
Compoñentes incluídos	19" rackmount brackets, Instructions, Rubber feet, power cable
UPC	766623562041

10. Garantía e soporte

10.1 Información da garantía

This Intellinet Network Solutions product is covered by a Garantía do fabricante de 3 anosConserva o comprobante de compra para reclamacións de garantía. A garantía cobre defectos de materiais e fabricación en condicións normais de uso.

10.2 Soporte técnico

For technical assistance, product documentation, or to register your product, please visit the official Intellinet Network Solutions websitio web ou póñase en contacto co servizo de atención ao cliente. A información de contacto adoita atoparse na páxina web do fabricante websitio ou na embalaxe do produto.

INTELLINET NETWORK SOLUTIONS 562041