1. Introdución
Thank you for choosing the Hollis Wall Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read it thoroughly before installation and keep it for future reference.

Figura 1: Fronte view of the Hollis Wall Mirror.
2. Información de seguridade
Observe as seguintes precaucións de seguridade para evitar lesións ou danos ao produto:
- Always handle the mirror with care, as it is made of glass and can break.
- Ensure the wall surface is suitable and strong enough to support the mirror's weight (approximately 12 pounds).
- Use appropriate mounting hardware for your specific wall type (e.g., drywall anchors, stud screws).
- Manteña os nenos e as mascotas lonxe da zona de instalación.
- Do not hang the mirror in areas where it may be subject to excessive vibration or impact.
- Clean the mirror only with recommended cleaning agents to avoid damage to the glass or frame.
3. Contido do paquete
Verifique que todos os compoñentes estean presentes e estean intactos ao abrir o envase:
- 1 x Hollis Wall Mirror (24"L x 32"H)
- Mounting Hardware (typically includes screws and wall anchors, specific types may vary)
Se falta algún elemento ou está danado, póñase en contacto co servizo de atención ao cliente.
4. Configuración e instalación
Tools you may need (not included): Pencil, Measuring Tape, Level, Drill, Screwdriver.
- Escolla localización: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Medir e marcar: Measure the distance between the hanging points on the back of the mirror. Mark the corresponding points on the wall using a pencil and level to ensure the mirror hangs straight.
- Install Anchors/Screws: Drill pilot holes at the marked locations. Insert wall anchors if necessary, then screw in the mounting screws, leaving them protruding slightly to allow the mirror's hanging brackets to engage.
- Espello colgado: Carefully lift the mirror and align the hanging brackets on the back with the screws on the wall. Gently lower the mirror until it is securely seated.
- Verificar a estabilidade: Tira lixeiramente do espello para asegurarte de que estea firmemente suxeito á parede e que non se mova.

Figure 2: Back of the mirror with mounting hardware.

Figura 3: Pro lateralfile of the mirror, illustrating its depth.
5. Operating (Daily Use)
The Hollis Wall Mirror is designed for static display and reflection. No active operation is required. If your mirror features an anti-fog coating, it is designed to remain clear in steamy environments without manual intervention or running under water.
6. Mantemento e coidados
To keep your mirror in pristine condition:
- Limpeza: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges.
- Evite produtos químicos agresivos: Do not use abrasive cleaners, ammonia-based products, or scouring pads, as these can damage the mirror surface or frame finish.
- Desempolvado: Regularly dust the frame with a dry, soft cloth.
- Inspección: Periodically check the mounting hardware to ensure the mirror remains securely fastened to the wall.
7 Solución de problemas
Problemas comúns e as súas solucións:
- Mirror appears wobbly after installation:
- Ensure screws are fully tightened and properly engaged with the hanging brackets.
- Verify that appropriate wall anchors were used for your wall type.
- Re-evaluate the wall's structural integrity.
- Mirror surface is streaky after cleaning:
- Use a clean, lint-free microfiber cloth.
- Ensure the glass cleaner is streak-free and applied sparingly to the cloth.
- Wipe in one direction, then buff with a dry section of the cloth.
- Anti-fog coating not working (if applicable):
- Ensure the bathroom is adequately ventilated.
- The anti-fog coating is designed for typical shower steam; extreme humidity might still cause some condensation.
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Xenérico |
| Número de modelo | shower-mirrors |
| Dimensións do produto | 24"L x 1.8"W (Note: The product title states 24" x 32", while dimensions state 24"L x 1.8"W. Assuming 24"L x 32"H for overall size and 1.8"W for depth.) |
| Tipo de habitación | Baño |
| Forma | Rectangular |
| Material do marco | Vidro |
| Estilo | Moderno |
| Tipo de montaxe | Soporte de parede |
| Tipo de acabado | Vidro |
| Característica especial | Inastillable |
| Cor | Gris |
| Número de pezas | 1 |
| Material | Vidro |
| Tipo de cadro | Enmarcado |
| Requírese montaxe | Non |
| Peso do elemento | 12 libras |
9. Información da garantía
Specific warranty details for the Hollis Wall Mirror are not provided in this manual. Please refer to the product listing on the retailer's website or contact the seller directly for warranty terms and conditions.
10. Atención ao cliente
For technical assistance, missing parts, or any inquiries regarding your Hollis Wall Mirror, please contact the seller or manufacturer through the platform where the product was purchased. Contact information is typically available on the product page or your order details.