FormulaMod 12VHPWR Extension Cable Instruction Manual

1. Introdución

This manual provides instructions for the proper installation, operation, and maintenance of the FormulaMod 12VHPWR Extension Cable. This cable is designed to connect a 16-pin (12+4) PCIe 5.0 GPU to a power supply unit (PSU) using four 8-pin PCIe connectors.

2. Produto rematadoview

2.1 Características

• Tipo de conector: 16-pin (12+4) Male to 4x 8-pin Female.
• Calibre de cable: 16AWG for stable power delivery.
• Lonxitude: 30cm (12-inch).
• Deseño: Sleeved power cord with pre-installed cable combs for neat cable management.
• Material: Ultra-soft, high-density nylon braid with tinned copper conductors.
• Compatibilidade: Designed for PCIe 5.0 GPUs such as RTX 4090, RTX 4080, and RTX 3090 Ti.

2.2 Especificacións

3. Instrucións de configuración

Follow these steps to properly install your FormulaMod 12VHPWR Extension Cable:

1. Prepara o teu sistema: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the graphics card and power supply unit.
2. Identificar conectores: Locate the 16-pin (12+4) power input on your PCIe 5.0 graphics card. Identify four available 8-pin PCIe power output connectors on your power supply unit.
3. Connect to GPU: Carefully insert the 16-pin male connector of the extension cable into the corresponding 16-pin port on your graphics card. Ensure it is fully seated and latched.
4. Conectar á fonte de alimentación: Connect each of the four 8-pin female connectors from the extension cable to four independente 8-pin PCIe power cables from your power supply. It is crucial to use separate cables from the PSU for each 8-pin connector on the extension cable to ensure stable power delivery and prevent overloading.

4. Instrucións de funcionamento

Once the FormulaMod 12VHPWR Extension Cable is securely connected to both your graphics card and power supply, no further operational steps are required for the cable itself. The cable acts as a passive conduit for power. Ensure all connections are firm before powering on your system.

After installation, close your computer case, plug in the power cord, and power on your system. Verify that your graphics card receives power and functions correctly.

5. Mantemento

The FormulaMod 12VHPWR Extension Cable requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:

• Inspección periódica: Periodically check the cable and its connectors for any signs of wear, damage, or discoloration.
• Limpeza: Keep the cable free from dust and debris. Use compressed air or a soft, dry cloth to gently clean the cable and connectors.
• Evitar o estrés: Do not bend the cable sharply or apply excessive force to the connectors. The cable features a pre-bent design for easier routing, but extreme angles can damage the internal wiring.
• Conexións seguras: Ensure all connections remain firmly seated. Loose connections can lead to power instability or component damage.

6 Solución de problemas

If you encounter issues after installing the FormulaMod 12VHPWR Extension Cable, consider the following troubleshooting steps:

• No Power to GPU:
  • Ensure the 16-pin connector is fully seated into the graphics card. A click should be heard or felt.
  • Verify that all four 8-pin connectors are securely plugged into independent PCIe power cables from your PSU.
  • Check that your PSU is adequately powered and functioning correctly.
• Inestabilidade ou fallos do sistema:
  • Confirm that your power supply unit meets the minimum wattage requirements for your graphics card and entire system.
  • Re-check all cable connections to ensure they are firm and not loose.
  • Ensure you are using four separate 8-pin PCIe cables from the PSU, not split cables, as shown in the setup diagram.
• Danos físicos: If the cable appears damaged, bent, or discolored, discontinue use immediately and replace it.

7. Garantía e soporte

For warranty information or technical support, please refer to the official Formulamod websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para calquera reclamación de garantía.

Fabricante: Formulamod