Maxxima Horizontal LED Step Light Instruction Manual

1. Produto rematadoview

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, damp, ou lugares secos.

Figura 1: Fronte view of the Maxxima Horizontal LED Step Light in black finish.

2. Información de seguridade

• AVISO: Risco de descarga eléctrica. Desconecte a alimentación no fusible ou no disyuntor antes da instalación ou do mantemento.
• Este produto debe ser instalado de acordo co código de instalación aplicable por unha persoa familiarizada coa construción e o funcionamento do produto e os perigos implicados.
• Asegúrese de que todas as conexións eléctricas estean seguras e cumpran cos códigos e as ordenanzas locais.
• Non instale este accesorio con mans molladas nin mentres estea parado sobre superficies húmidas ou secas.amp superficies.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• Do not modify the fixture or use it for purposes other than its intended use.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• Ferraxes de montaxe (parafusos, porcas para cables)
• Manual de instrucións (este documento)

Figura 2: Explotado view showing the step light components, including the faceplate and internal module.

4. Especificacións

5. Instrucións de instalación

Antes de comezar: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. Preparar a caixa de conexións: Ensure you have a standard one-gang junction box installed in the desired location.
2. Conectar cableado:
   • Conecta o negro cable desde o aparello ata o quente (black) wire from the junction box.
   • Conecta o branco cable desde o aparello ata o neutro (white) wire from the junction box.
   • Conecta o verde cable desde o aparello ata o chan (green or bare copper) wire from the junction box.
   Secure all connections with the provided wire nuts.
3. Seleccionar a temperatura da cor (CCT): Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Attach the Faceplate: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. Restaurar enerxía: Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

Video guía de instalación

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. Instrucións de funcionamento

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. Mantemento

The LED step light requires minimal maintenance. To clean the fixture:

• Ensure power is OFF before cleaning.
• Limpar a superficie exterior cun pano suave eamp pano.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

8 Solución de problemas

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• A luz non se acende:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Ensure the fixture is receiving the correct voltage (120 V CA).
• Light flickers or dims:
  • Comprobe as conexións de cables soltas.
  • Ensure the fixture is not connected to a dimmer switch unless explicitly rated for dimming (this model is not specified as dimmable).
  • Verificar unha subministración de enerxía estable.
• Incorrect color temperature:
  • Apague o dispositivo.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. Garantía e soporte

This Maxxima Horizontal LED Step Light is covered by a 3 ano de garantía desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

Información de contacto: Refer to the Maxxima websitio web ou na documentación da súa compra para obter os datos de contacto máis actuais.