TechniSat DIGICLOCK 3 FM Projection Radio Alarm Clock User Manual

Introdución

The TechniSat DIGICLOCK 3 is an FM projection radio alarm clock designed to display time clearly on its LED screen and project it onto a wall or ceiling. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance.

Imaxe: Fronte view of the TechniSat DIGICLOCK 3, showing the digital time display and the time projected from the top.

1. Configuración

1.1 Conexión de alimentación

Connect the integrated power adapter to a standard electrical outlet. For backup power during outages, insert optional batteries (not included) into the battery compartment. This ensures time and alarm settings are retained.

1.2 Conexión de antena

Extend the integrated FM wire antenna for optimal radio reception. Position the antenna away from other electronic devices to minimize interference.

1.3 Axuste da hora inicial

Upon first power-up or after a complete power loss without battery backup, the time may need to be set manually. Refer to the "Setting Time and Date" section under Operating Instructions for details.

2. Instrucións de funcionamento

2.1 Controisview

Imaxe: Arriba view of the alarm clock, highlighting the various control buttons for time, alarm, radio, and projection functions.

The top panel of the DIGICLOCK 3 features several buttons for controlling its functions:

• TIME SET / PRESET: Used to set the time and save/recall radio presets.
• ALARMA: Activates/deactivates alarms.
• PROJECTION ON/OFF / 180° FLIP: Controls the projection feature and flips the projected image.
• SORME / SORME: Activates snooze during an alarm or sets the sleep timer for radio playback.
• AL VOL+ / AL VOL-: Adjusts alarm volume.
• MIN/TUNE+ / HOUR/TUNE-: Adjusts minutes/hours and tunes radio frequencies.

2.2 Axuste da hora e da data

1. Manteña premido o HORARIO botón. A pantalla da hora parpadeará.
2. Usa o HOUR/TUNE- e MIN/TUNE+ botóns para axustar a hora.
3. Preme HORARIO again. The minute display will flash.
4. Usa o HOUR/TUNE- e MIN/TUNE+ botóns para axustar os minutos.
5. Preme HORARIO para confirmar e saír do modo de axuste da hora.

2.3 Funcións de alarma

The DIGICLOCK 3 supports two independent alarms (Alarm 1 and Alarm 2).

Configurar unha alarma:

1. Manteña premido o ALARMA button. "AL1" or "AL2" will flash.
2. Preme ALARMA repeatedly to select Alarm 1 or Alarm 2.
3. Use HOUR/TUNE- e MIN/TUNE+ para configurar a hora da alarma desexada.
4. Preme ALARMA para confirmar a hora.
5. Select the alarm source (FM radio or buzzer) using HOUR/TUNE- e MIN/TUNE+.
6. Preme ALARMA to confirm and activate the alarm. An alarm icon will appear on the display.

Función de Snooze:

Cando soe unha alarma, prema o botón AMORTAR botón para silenciala temporalmente. A alarma volverá soar despois de aproximadamente 9 minutos.

Deter unha alarma:

To stop an alarm completely, press the ALARMA button. The alarm will reset for the next day. To deactivate an alarm, press the ALARMA botón ata que a icona da alarma desapareza da pantalla.

2.4 Funcionamento da radio FM

Tuning Radio Stations:

Preme o RADIO ON/OFF button to turn on the FM radio. Use the HOUR/TUNE- e MIN/TUNE+ buttons to manually tune to a desired frequency. Press and hold these buttons for automatic scanning.

Storing and Recalling Presets:

The device can store up to 10 FM radio stations.

1. Sintonice a emisora ​​desexada.
2. Manteña premido o PRESET button until a preset number flashes.
3. Use HOUR/TUNE- e MIN/TUNE+ to select a preset number (P01-P10).
4. Preme PRESET again to save the station.
5. Para recuperar unha predefinición, prema brevemente o botón PRESET botón e despois use HOUR/TUNE- e MIN/TUNE+ para seleccionar a configuración predefinida desexada.

Temporizador de sono:

Mentres soa a radio, prema o botón DURMIR button repeatedly to set a sleep timer (e.g., 90, 60, 30, 15 minutes). The radio will automatically turn off after the set time.

2.5 Proxección temporal

Imaxe: Lateral view of the alarm clock, focusing on the projector lens which can be rotated to adjust the projection angle.

The DIGICLOCK 3 features an integrated projector to display the time on a wall or ceiling.

• Activating/Deactivating Projection: Prema o botón PROXECCIÓN ON / OFF botón para activar ou desactivar a proxección.
• Axuste do ángulo de proxección: Rotate the projector lens on top of the unit to adjust the angle of the projected time up to 180 degrees.
• Flipping Projected Image: If the projected time appears upside down, press the VOLACIÓN DE 180° button (often combined with PROJECTION ON/OFF) to rotate the image 180 degrees.
• Axuste do foco: A small ring around the projector lens can be rotated to adjust the focus of the projected image for clarity.

Note: The clarity and visibility of the projected time may vary depending on ambient light conditions and projection distance. Optimal projection distance is typically within 1 to 1.5 meters.

2.6 Brillo da pantalla

The 1.2-inch LED display offers two brightness levels. Briefly press the AMORTAR button (when no alarm is active) to cycle between the brighter and dimmer display settings.

3. Mantemento

3.1 Limpeza

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface. Ensure no liquids enter the device.

3.2 Substitución da batería

If using optional backup batteries, replace them periodically (e.g., annually) or when the display shows signs of power loss during an outage. Use the specified battery type and dispose of old batteries responsibly.

4 Solución de problemas

5. Especificacións

6. Garantía e soporte

Spare parts availability for this product is indicated for 1 year from the date of purchase. For further support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official TechniSat websitio.