1. Introdución
Thank you for choosing the Tresda LED Rechargeable Work Light with Clamp. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
This work light is designed to provide versatile and bright illumination for various tasks, featuring a powerful COB LED, multiple light modes, adjustable angles, and a rechargeable battery with power bank functionality.
2. Instrucións de seguridade
- Always ensure the work light is fully charged before initial use to optimize battery life.
- Non mire directamente á luz LED cando estea acesa, xa que pode causar fatiga ou danos oculares.
- Manteña o dispositivo lonxe de temperaturas extremas, luz solar directa e líquidos corrosivos.
- Do not attempt to disassemble or modify the work light. This may void the warranty and pose safety risks.
- Ensure the charging port cover is securely closed when not charging to maintain IPX5 water resistance.
- Emprega só o cable de carga incluído ou un equivalente certificado.
- Manter fóra do alcance dos nenos.
3. Contido do paquete
Verifique que todos os elementos estean presentes e en bo estado ao abrir o paquete:
- Tresda LED Rechargeable Work Light with Clamp (x2)
- Cable de carga USB (x2)
- Manual de usuario (este documento)
4. Produto rematadoview
The Tresda LED Rechargeable Work Light is designed for versatility and durability. Familiarize yourself with its key components:
Figura 4.1: Detallado view of the Tresda LED Rechargeable Work Light, highlighting its components including the COB LED panel, 270° rotation mechanism, power switch, built-in 2600mAh rechargeable battery, USB charging port, USB output port, magnetic base, and large clamp.
- Panel LED COB: Provides 2100 lumens of bright 6000K daylight.
- Interruptor de alimentación: Controls power and cycles through light modes.
- Mecanismo de rotación: Allows 180-degree forward/backward adjustment and 270-degree swivel for precise light positioning.
- Porto de carga USB: Para recargar a batería interna.
- Porto de saída USB: Funciona como unha batería externa para cargar dispositivos externos.
- Base magnética: Provides a secure hold on metal surfaces.
- Clamp: Attaches to surfaces up to 2 inches thick.
- Indicador de potencia: Mostra a carga restante da batería.
5. Configuración
5.1 Carga inicial
Before first use, fully charge the work light. Connect the provided USB charging cable to the work light's charging port and to a standard USB power adapter (not included). The power indicator lights will show charging progress. A full charge typically takes several hours.
5.2 Opcións de montaxe
Figura 5.1: Illustration of the three primary usage methods for the work light: clamping onto a surface, attaching via the magnetic base, and handheld portable use.
- Clamp Uso: Abre o clamp and attach it securely to any surface up to 2 inches thick. Ensure the clamp has a firm grip before releasina luz.
- Uso magnético: The base of the work light contains strong magnets. Attach the light directly to any ferrous metal surface for hands-free operation.
- Uso portátil: The ergonomic handle allows for comfortable handheld use, making it easy to carry and direct light where needed.
6. Instrucións de funcionamento
6.1 Acendido/apagado e modos de luz
Figura 6.1: Visual representation of the three available light modes: High Light Mode for maximum brightness, Low Light Mode for extended battery life, and Strobe Light Mode for signaling or emergencies.
- Press the power switch once to turn on the light in Modo de luz alta.
- Press the power switch a second time to switch to Modo de pouca luz.
- Press the power switch a third time to activate Strobe Light Mode.
- Press the power switch a fourth time to turn off the light.
6.2 Adjusting Light Angle
Figura 6.2: Diagram illustrating the adjustable head of the work light, capable of 180-degree forward/backward tilt and 270-degree swivel rotation for optimal light direction.
The light head can be manually adjusted to direct illumination precisely where needed. It offers 180 degrees of forward and backward tilt and 270 degrees of swivel rotation. Gently pivot and rotate the light head to achieve the desired angle.
6.3 Uso como batería externa
To charge external devices, open the protective cover on the side of the work light to reveal the USB output port. Connect your device's charging cable to this port. The work light will begin charging your device. Note that using the power bank feature will reduce the work light's operational time.
7. Charging the Work Light
When the power indicator lights show low battery, it is time to recharge the work light. Open the protective cover and connect the provided USB charging cable to the micro-USB input port. Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port, power bank). The indicator lights will illuminate to show charging status and turn solid when fully charged. Ensure the protective cover is sealed after charging to maintain water resistance.
8. Mantemento
- Limpeza: Wipe the work light with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Almacenamento: Store the work light in a cool, dry place away from direct sunlight when not in use. For long-term storage, charge the battery to approximately 50% every 3-6 months to preserve battery health.
- Resistencia á auga: The work light is IPX5 rated, meaning it is protected against low-pressure water jets from any direction. Do not submerge the light in water. Always ensure the charging port cover is sealed.
9 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | A batería está esgotada. | Cargue a luz de traballo completamente. |
| A luz é débil. | Low battery or in Low Light Mode. | Recharge the battery or cycle to High Light Mode. |
| Device not charging from work light. | Work light battery is low or cable is faulty. | Ensure work light is sufficiently charged. Try a different USB cable. |
| Ingreso de auga. | Charging port cover not sealed. | Ensure the charging port cover is always securely closed when not in use. Do not submerge. |
10. Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | ST24-2P |
| Fonte de luz | LED COB |
| Brillo | 2100 lúmenes (modo alto) |
| Temperatura da cor | 6000K de luz do día |
| Modos de luz | Alto, Baixo, Estroboscópico |
| Tipo de batería | Lithium Ion (2600mAh built-in) |
| Tempo de execución (modo baixo) | Ata 7 horas |
| Ángulos de rotación | 180° (forward/backward), 270° (swivel) |
| Resistencia á auga | IPX5 |
| Dimensións | 17.53 x 22.86 x 12.19 cm (aprox.) |
| Peso | 0.9 kg (aprox.) |
| Fonte de enerxía | Alimentado por batería (recargable mediante USB) |
11. Garantía e soporte
Tresda products are manufactured to high-quality standards. For warranty information or technical support, please refer to the purchase platform or contact Tresda customer service directly. Please have your model number (ST24-2P) and purchase details ready when contacting support.
Nota: Os termos específicos da garantía poden variar segundo a rexión e o vendedor.