1. Introdución
The wolfcraft PRO Miter Box and Angle Finder 6956000 is a versatile 2-in-1 tool designed for precise measurement and cutting of miter joints, particularly for skirting boards. This manual provides essential information for the safe and effective use of your tool, ensuring optimal results for your projects. It is ideal for skirting boards up to 120 mm in height.
Figure 1: wolfcraft PRO Miter Box and Angle Finder with removable trestles and guide pins.
2. Instrucións de seguridade
- Always wear appropriate personal protective equipment, including safety glasses and gloves, when operating the tool.
- Ensure the workpiece (skirting board) is securely clamped or held in place before cutting to prevent movement and ensure accuracy.
- Use a sharp hand saw appropriate for the material being cut. Dull blades can cause kickback or imprecise cuts.
- Keep hands and fingers clear of the saw blade's path at all times.
- Do not force the saw; let the blade do the work.
- Manter a zona de traballo limpa e ben iluminada.
- Store the tool in a dry, safe place out of reach of children.
3 Compoñentes
The wolfcraft PRO Miter Box and Angle Finder consists of the following main components:
- Corpo principal: The central unit housing the angle measurement arms and cutting guides.
- Brazos flexibles: Two movable arms for measuring internal and external angles (85° to 275°).
- Locking Screws: Two screws to secure the measured angle.
- Sliding Stops: Adjustable stops to hold skirting boards up to 40 mm thick.
- Guide Pins: Four integrated 140 mm guide pins for hand saw guidance.
- Plastic Protections: Covers around the guide pins to prevent saw jamming and protect the blade.
- Removable Trestles: Two trestles for stabilizing longer skirting boards during cutting.
- Anti-slip Pads: For secure placement during use.
Figure 2: Detail of lockable sliding stops and angle measurement locking screw.
Figure 3: Integrated guide pins with plastic protection for precise saw cuts.
4. Configuración
The tool is supplied partially disassembled. Follow these steps for initial setup:
- Desembalaxe: Retire coidadosamente todos os compoñentes da embalaxe.
- Assemble Guide Pins: If not already assembled, insert the guide pins into their designated slots on the main body. Ensure they are securely fastened.
- Attach Trestles (Optional): For longer skirting boards, attach the two removable trestles to the sides of the miter box to provide additional support.
- Colocación: Place the miter box on a stable, flat, and clean surface. The anti-slip pads on the base will help secure it during use.
Figure 4: The tool's flexible arms allow angle measurement from 85° to 275°.
5. Instrucións de funcionamento
5.1 Measuring Angles
The tool can measure both internal and external angles directly from the wall.
- Posicionamento: Place the miter box directly against the corner where the skirting board will be installed.
- Axustar brazos: Adjust the two flexible arms to align perfectly with the walls of the corner. The metal arms are designed to reach into narrow areas.
- Ángulo de bloqueo: Once the arms are aligned, tighten the two locking screws to secure the measured angle. The tool automatically bisects the angle, setting the correct cutting angle for your miter joint.
Figure 5: Measuring an internal corner angle with the flexible arms.
Figure 6: Metal arms allow angle measurement even in tight spaces.
5.2 Realización de cortes a inglete
After measuring the angle, proceed with cutting:
- Position Skirting Board: Place the skirting board (up to 120 mm high and 40 mm thick) into the miter box. Ensure it is flush against the back and bottom surfaces.
- Secure Skirting Board: Adjust the sliding stops to firmly hold the skirting board in place. For longer boards, use the removable trestles for additional stability.
- Align Saw: Position your hand saw between the integrated guide pins. The plastic protections will help guide the saw and prevent it from binding or damaging the blade.
- Corte: Carefully saw through the skirting board, maintaining a steady and even stroke. The guide pins will ensure a precise miter cut.
- Repetir: For the opposing piece of skirting board, the tool can be used in the opposite direction to achieve the complementary angle.
Figure 7: Step-by-step process for angle measurement and miter cutting.
Figure 8: Securing the skirting board with lockable sliding stops.
Figure 9: Making a precise miter cut with a hand saw.
Figura 10: Example of a precisely fitted skirting board corner.
6. Mantemento
- Limpeza: After each use, remove sawdust and debris from the miter box using a brush or compressed air. Ensure the guide pins and sliding mechanisms are free of obstructions.
- Inspección: Regularly inspect the tool for any signs of wear or damage, especially to the guide pins, flexible arms, and locking mechanisms.
- Almacenamento: Store the tool in a clean, dry environment to prevent corrosion and damage.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Inaccurate angle measurement | Arms not flush against the wall; locking screws not tightened. | Ensure arms are pressed firmly against the wall. Tighten locking screws securely after measurement. |
| Saw binds or gets stuck | Dull saw blade; excessive force; sawdust buildup in guides. | Use a sharp saw. Apply steady, moderate pressure. Clean guide pins and channels regularly. |
| Skirting board moves during cutting | Sliding stops not tight enough; board not supported. | Ensure sliding stops are firmly secured. Use trestles for long boards. |
| Cortes ásperos ou astillados | Dull saw blade; incorrect saw type for material; too much pressure. | Use a sharp, fine-toothed saw. Reduce cutting pressure. |
8. Especificacións
- Número de modelo: 6956000
- Marca: wolfcraft
- Dimensións do produto (L x W x H): 57.5 x 19.8 x 6.7 cm
- Peso do artigo: 2.43 quilogramos
- Material (Handle): Lightweight and durable plastic or synthetic material
- Material (Blade): Carbon steel (for compatible saws, not included)
- Cor: Gris
- Fonte de enerxía: Manual
- Característica especial: Lixeiro
- Compoñentes incluídos: 1 PRO Miter Box and Angle Finder, 2 Trestles
- Max Skirting Board Height: 120 mm
- Max Skirting Board Thickness: 40 mm
- Rango de ángulos: 85 a 275 graos
- Guide Pin Length: 140 mm
- País de orixe: Eslovaquia
9. Garantía e soporte
The wolfcraft PRO Miter Box and Angle Finder 6956000 comes with a 10-year wolfcraft warranty, reflecting its robust, durable, and high-quality "Made in Europe" construction.
For warranty claims, technical support, or spare parts availability, please contact wolfcraft customer service directly or visit their official website. Please refer to your purchase receipt for proof of purchase.
Figure 11: Quality assurance: Made in Europe with a 10-year guarantee.