ONEVAN Cordless Brushless Impact Wrench (Model sku006213) User Manual

Introdución

Thank you for choosing the ONEVAN Cordless Brushless Impact Wrench. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

Instrucións xerais de seguridade

AVISO: Lea todas as advertencias de seguridade, instrucións, ilustracións e especificacións proporcionadas con esta ferramenta eléctrica. O incumprimento de todas as instrucións que se indican a continuación pode producir descargas eléctricas, incendios e/ou lesións graves.

Seguridade da zona de traballo

• Manter a zona de traballo limpa e ben iluminada. As zonas desordenadas ou escuras invitan a accidentes.
• Non utilice ferramentas eléctricas en atmosferas explosivas, como en presenza de líquidos, gases ou po inflamables. As ferramentas eléctricas crean faíscas que poden acender o po ou os fumes.
• Manteña os nenos e os espectadores afastados mentres manexa unha ferramenta eléctrica. As distraccións poden facer que perdas o control.

Seguridade Eléctrica

• Os enchufes das ferramentas eléctricas deben coincidir coa toma de corrente. Nunca modifique o enchufe de ningún xeito.
• Evite o contacto corporal con superficies conectadas a terra, como tubos, radiadores, cociñas e frigoríficos. Hai un maior risco de descarga eléctrica se o seu corpo está conectado a terra ou a terra.
• Non expoña as ferramentas eléctricas á choiva ou a condicións de humidade. A auga que entra nunha ferramenta eléctrica aumentará o risco de descarga eléctrica.

Seguridade persoal

• Always wear eye protection. Use appropriate safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection when necessary.
• Mantéñase alerta, observa o que está a facer e use o sentido común ao manexar unha ferramenta eléctrica.
• Evitar o arranque involuntario. Asegúrese de que o interruptor estea na posición de apagado antes de conectar a batería, coller ou transportar a ferramenta.

Contido do paquete

Ao desembalar, comprobe que todos os elementos enumerados a continuación estean presentes e non estean danados:

• 1x ONEVAN Cordless Brushless Impact Wrench
• 2x 3.0Ah Lithium-ion Batteries
• 1 x cargador de batería
• 6x Sockets (14mm, 17mm, 18mm, 19mm, 21mm, 22mm)
• Additional accessories (e.g., drill chuck, screwdriver bit adapter, retaining ring, pin)

Image: ONEVAN Cordless Impact Wrench with included accessories, including two batteries, a charger, and a set of six sockets (14mm, 17mm, 18mm, 19mm, 21mm, 22mm), along with a drill chuck and screwdriver bit adapter.

Características do produto

• Motor sen escobillas de alto rendemento: The ONEVAN impact wrench is equipped with an advanced brushless motor, offering higher efficiency (20-30% higher than traditional brush motors), reduced wear, longer lifespan, and stable power output without smoke or sparks. This design minimizes maintenance costs and enhances durability.

Image: Internal diagram of the brushless motor, emphasizing its benefits such as high power, low energy loss, extended lifespan, and superior efficiency compared to brushed motors.
• Powerful Torque and Variable Speed: Delivers a maximum tightening torque of 280 N.m and a maximum loosening torque of 300 N.m. The tool features 2 adjustable speed levels for both forward and reverse rotation, allowing precise control by varying pressure on the trigger.
• Long-Lasting 3.0Ah Batteries: Comes with two high-capacity 3000 mAh Lithium-ion batteries, providing ample power for extended outdoor use. Integrated battery chip technology ensures reduced power loss and faster charging. A built-in battery indicator keeps you informed of the charge level.


Imaxe: Detallada view of the ONEVAN Li-ion battery, illustrating its internal structure and multiple protection mechanisms including overcurrent, voltage, short circuit, chip, charging, temperature regulation, and over-discharge protection, ensuring long-term work capability.

• Forward/Reverse with Auto-Stop Function: Equipped with a locking system and distinct forward and reverse modes. In reverse mode, the auto-stop function activates once a nut or bolt is loosened, reducing speed and torque to prevent the fastener from falling off completely.


Image: Visual guide to the forward/reverse button positions and the automatic stop function in reverse, which prevents fasteners from completely detaching once loosened.

• Luz LED incorporada: An integrated LED light illuminates the work area, improving visibility in dark or confined spaces.

Image: The impact wrench operating in a dimly lit environment, demonstrating how the built-in LED light effectively illuminates the working area for enhanced visibility.
• Uso multifuncional: Suitable for various applications including car tire removal, household appliance maintenance, heavy equipment assembly, and general fastening tasks. Can function as an impact wrench, impact drill (with appropriate adapter), or screwdriver.


Image: An annotated diagram of the ONEVAN impact wrench, highlighting its key components such as the 1/2-inch square drive, LED light, variable speed switch, ergonomic handle, forward/reverse button, and the 3.0Ah Li-ion battery pack.

Configuración

1. Cargando a batería

1. Asegúrese de que a batería estea completamente cargada antes do primeiro uso.
2. Conecta o cargador a unha toma de corrente estándar.
3. Deslice a batería no cargador ata que encaixe no seu lugar.
4. The charger indicator light will show the charging status. Refer to the charger manual for specific light indications.
5. Unha vez cargada completamente, desconecte a batería do cargador e desconecte o cargador da toma de corrente.

2. Instalación da batería

1. Align the battery pack with the receptacle at the base of the impact wrench handle.
2. Deslice a batería na asa ata que quede ben encaixada no seu lugar. Asegúrese de que estea firmemente asentada para evitar que se desprenda accidentalmente durante o funcionamento.
3. To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.

3. Attaching Sockets/Accessories

1. Asegúrese de que a ferramenta estea apagada e de que a batería estea retirada antes de colocar ou retirar accesorios.
2. Align the square drive of the socket with the 1/2-inch square drive anvil on the impact wrench.
3. Push the socket firmly onto the anvil until it clicks into place. Some sockets may require aligning with a detent pin or friction ring.
4. To remove, pull the socket off the anvil. For stubborn sockets, a slight twisting motion may help.

Instrucións de funcionamento

1. Acendido/apagado e control de velocidade

• To turn on the tool, press the variable speed trigger switch. The tool speed increases with increased trigger pressure.
• Para apagar a ferramenta, solte o interruptor de disparo.
• The tool features 2 speed settings. Use the speed selector button (if present, typically near the trigger) to cycle between low and high speeds.

2. Rotación cara adiante/cara atrás

• The forward/reverse button (typically a lever above the trigger) controls the direction of rotation.
• Push the button to the left for forward rotation (tightening).
• Push the button to the right for reverse rotation (loosening).
• When the button is in the center position, the trigger is locked, preventing accidental startup. Always engage the lock when not in use or when changing accessories.

3. Using the Auto-Stop Function (Reverse Mode)

• When loosening fasteners, select reverse rotation.
• As the fastener becomes loose, the tool's auto-stop function will reduce speed and torque. This helps prevent the nut or bolt from spinning off completely and falling.
• Monitor the fastener and manually stop the tool when the desired looseness is achieved.

4. Luz de traballo LED

• The built-in LED light activates automatically when the trigger is pressed, illuminating the work area.
• It will turn off shortly after the trigger is released.

Mantemento

Regular maintenance ensures the longevity and optimal performance of your ONEVAN impact wrench.

Limpeza

• Desconecte sempre a batería antes de realizar calquera limpeza ou mantemento.
• Use un suave, damp pano para limpar o exterior da ferramenta. Non empregue produtos químicos agresivos nin produtos de limpeza abrasivos.
• Manteña as aberturas de ventilación libres de po e residuos para evitar o sobrequecemento. Use aire comprimido se é necesario.

Coidado da batería

• Almacene as baterías nun lugar fresco e seco lonxe da luz solar directa e de temperaturas extremas.
• Non garde as baterías descargadas durante períodos prolongados. Cárgueas periodicamente se non as está a usar.
• Evite deixar caer as baterías ou someterlas a impactos.

Inspección Xeral

• Periodically inspect the tool for any signs of damage, loose screws, or worn parts.
• Ensure the square drive anvil is free from excessive wear or damage.
• If any damage is found, do not operate the tool. Contact customer support for assistance.

Resolución de problemas

Especificacións

Garantía e Soporte

Información da garantía

ONEVAN products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ONEVAN websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.

Atención ao cliente

If you have any questions, require technical assistance, or need to report a problem with your ONEVAN Cordless Brushless Impact Wrench, please contact our customer support team. Contact details can typically be found on the product packaging, the official ONEVAN websitio web ou a través do seu vendedor.

When contacting support, please have your model number (sku006213) and purchase date ready.