GKUTW Car Jump Starter User Manual

Introdución

This user manual provides essential information for the safe and effective operation of your GKUTW Car Jump Starter. Please read this manual thoroughly before using the product and retain it for future reference.

The GKUTW Car Jump Starter, a portable device designed to jump-start vehicles and serve as a power bank and flashlight.

Información de seguridade

Observe sempre as seguintes precaucións de seguridade para evitar lesións ou danos ao produto e ao vehículo:

• Non intente arrancar con axuda unha batería conxelada.
• Asegúrate de conectar a polaridade correcta (vermello a positivo, negro a negativo) para evitar faíscas e danos.
• Non conecte o cl positivo e negativoamps xuntos.
• Manteña o arrancador de baterías fóra do alcance dos nenos.
• Non expoña o produto a temperaturas ou humidade extremas.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
• Ensure the jump starter is charged above 70% before attempting to jump-start a vehicle.

The jump starter features multiple safety protections including over-charger, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, over-voltage, high-low temperature, and reverse-charge protection.

Contido do paquete

Verifica que todos os elementos estean presentes no teu paquete:

• 1 x GKUTW Car Jump Starter (Model: HX160J7)
• 1 x cables de puente intelixentes
• 1 x cable de carga USB-C
• 1 x Manual de usuario
• 1 x Portable EVA Hard Carrying Case

All components included in the GKUTW Car Jump Starter package.

Produto rematadoview

The GKUTW Car Jump Starter is a versatile device designed for emergency vehicle starting and portable power needs. It features a high peak current for quick starts, smart clamps for safety, and multiple charging outputs.

Características principais:

• Corrente máxima de 6000 A: Capable of jump-starting 10.0L gas and 8.0L diesel engines.
• Intelixente Clamps: Upgraded reinforced clamps with spark-proof technology and reverse polarity protection.
• Pantalla LCD: Shows operational status and battery level.
• Banco de enerxía de 26800 mAh: Features 5V/2.4A USB-A output and 5V/3A Type-C input for charging mobile devices.
• Ultra-Bright LED Flashlight: Includes Light, Strobe, and SOS modes for emergency situations.

The jump starter's powerful 6000A peak current is suitable for a wide range of 12V vehicles.

Compatibility with various 12V vehicles, from passenger cars to trucks.

Configuración

Carga inicial:

Before first use, fully charge the jump starter. It is recommended to use a 5V/2.1A adapter or above for optimal charging speed.

1. Connect the provided USB-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a suitable USB wall adapter (not included).
3. The LCD display will show the charging progress. Charge until it indicates 100%.

For best performance, ensure the jump starter is at least 70% charged before attempting to jump-start a vehicle.

Instrucións de funcionamento

Arrancar un vehículo:

1. Ensure the jump starter is sufficiently charged (above 70%).
2. Insert the blue plug of the smart jumper cables into the jump starter's 12V output port.
3. Conecta o cl vermelloamp to the positive (+) terminal of the vehicle's dead battery.
4. Conecta o cl negroamp to the negative (-) terminal of the vehicle's dead battery.
5. Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump-start. If it flashes green and red, or is solid red, refer to the troubleshooting section.
6. Arranca o motor do teu vehículo.
7. Once the engine starts, immediately remove the black clamp from the vehicle battery, then the red clamp.
8. Finally, disconnect the smart jumper cables from the jump starter.

Step-by-step guide for jump-starting your vehicle.

Usando a linterna LED:

The jump starter features an integrated LED flashlight with multiple modes:

1. Press and hold the power button on the side of the jump starter for 3 seconds to turn on the flashlight (steady light mode).
2. Press the power button again to switch to SOS mode (slow flashing).
3. Press the power button a third time to switch to Strobe mode (fast flashing).
4. Press and hold the power button again for 3 seconds to turn off the flashlight.

The ultra-bright LED flashlight provides illumination and emergency signaling.

Usando como banco de enerxía:

The 26800mAh capacity allows you to charge various electronic devices:

• Connect your device's USB charging cable to the 5V/2.4A USB-A output port on the jump starter.
• O arrancador comezará a cargar o dispositivo automaticamente.

The jump starter functions as a portable power bank for your electronic devices.

Mantemento

• Almacenamento: Store the jump starter in its portable EVA hard carrying case in a cool, dry place when not in use.
• Recargando: If the jump starter is not used for a long period, it is recommended to charge it every 2-3 months to maintain battery health and ensure it is ready for use.
• Limpeza: Limpe a unidade cun pano seco e suave. Non empregue produtos químicos agresivos nin materiais abrasivos.

The compact design and included case make storage and transport convenient.

Resolución de problemas

Especificacións

Garantía e Soporte

GKUTW offers a 3-YEAR FREE Warranty for this Car Jump Starter. We also provide Lifetime Technical Support and 24/7 Customer Services.

For any questions, technical assistance, or warranty claims, please contact GKUTW customer support through the retailer's platform or visit our official website (if available, specific contact details are not provided in the input data).

Conserve o comprobante de compra para efectos da garantía.