Introdución
This manual provides essential information for the safe and efficient operation of your Wisdomlit 400W 2-in-1 Fog Bubble Machine. Please read these instructions thoroughly before first use and retain for future reference.
The Wisdomlit Fog Bubble Machine is designed to produce both traditional colorful bubbles and unique fog-filled bubbles, enhancing various indoor and outdoor events.
Información de seguridade
PRECAUCIÓN: Bubble solution and fog fluid are NON included with the Wisdomlit Fog Bubble Machine. These liquids must be purchased separately.
AVISO: To prevent damage and ensure longevity, do NON leave bubble liquid and fog juice in the liquid tanks when the machine is not in use. Always drain the tanks after each use.
- Asegúrese de colocar a máquina nunha superficie estable e nivelada.
- Keep the machine away from heat sources and open flames.
- Do not operate the machine in wet conditions or expose it to rain.
- Manter fóra do alcance dos nenos e animais durante a operación.
- Use only recommended bubble solution and fog fluid.
- Desconecte a máquina da toma de corrente antes de limpala ou realizala mantemento.
O que hai na caixa
Ao desembalar, comproba que se inclúen todos os seguintes elementos:
- 1 x Wisdomlit Fog Bubble Machine
- 1 x Replacement Fuse (125V, 5A)
- 1 x Measuring Cup (3.4 Fl Oz / 100ml)
- 1 x Manual de usuario
- "Try Me" Concentrated Liquid (Note: This is a sample; full solutions must be purchased separately.)

Produto rematadoview
The Wisdomlit Fog Bubble Machine is a versatile device capable of producing over 5000 bubbles per minute. It features two separate liquid tanks for bubble solution and fog fluid, allowing for both colorful bubbles and unique fog-filled bubbles.



Instrucións de configuración
- Colocación: Position the fog bubble machine on a stable, flat surface in the desired operating area. Ensure adequate ventilation around the unit.
- Fill Bubble Liquid Tank: Open the cap of the bubble liquid tank (14.2 Fl Oz / 420 mL capacity). Carefully pour bubble solution into the tank. Do not overfill.
- Fill Fog Liquid Tank: Open the cap of the fog liquid tank (8.5 Fl Oz / 250 mL capacity). Carefully pour fog fluid into the tank. Do not overfill.
- Conexión de alimentación: Conecte o cable de alimentación a unha toma de parede estándar.

Instrucións de funcionamento
- Encendido: After connecting to power, turn on the machine using the main power switch.
- Warm-up (for Fog Mode): If operating in fog bubble mode, allow approximately 3 to 7 minutes for the machine to warm up. The red light indicates heating, and the green light indicates it is ready for operation.
- Seleccionar modo: Use the mode switch to select your desired output:
- Modo burbulla: Produces colorful, traditional bubbles.
- Modo Smoky Bubble: Produces fog-filled bubbles.
- Operación: The machine will begin producing bubbles or fog bubbles according to the selected mode. The large capacity tanks allow for approximately one hour of continuous use.
- Apagado: When finished, switch off the machine and unplug it from the power outlet.

Mantemento
Regular maintenance ensures optimal performance and extends the lifespan of your machine.
- Drain Tanks: After each use, it is crucial to drain any residual bubble solution and fog fluid from their respective tanks. The machine features individual drainage outlets for this purpose.
- Limpeza: Limpa o exterior da máquina cun pano suave eamp pano. Non mergulle a máquina na auga.
- Almacenamento: Store the machine in a dry, cool place away from direct sunlight and extreme temperatures. Ensure tanks are empty before storage.

Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A máquina non se acende. | No power, faulty power cord, blown fuse. | Check power connection. Ensure outlet is functional. Replace fuse if blown (use provided replacement fuse). |
| No bubbles/fog bubbles produced. | Tanks empty, incorrect liquid, clogged nozzle, machine not warmed up (fog mode). | Refill tanks with appropriate liquid. Ensure correct mode is selected. Allow sufficient warm-up time for fog mode. Clean nozzle if clogged. |
| Weak bubble/fog output. | Low liquid level, diluted solution, partial clog. | Check liquid levels and refill. Ensure correct concentration of solution/fluid. Clean nozzle. |
Especificacións
| Número de modelo | QB-809A |
| Marca | Wisdomlit |
| Poder | 400 W |
| Capacidade do tanque de líquido de burbullas | 14.2 Fl Oz / 420 mL |
| Capacidade do tanque de líquido para néboa | 8.5 Fl Oz / 250 mL |
| Dimensións (L x W x H) | 10.7 x 9.8 x 6.3 polgadas (27.2 x 24.8 x 15.9 cm) |
| Peso do elemento | 6.09 libras |
| Tipo de material | Plástico |
| Fonte de enerxía | Eléctrico con cable |
Garantía e Soporte
Specific warranty details are not provided in the product information. For warranty claims, technical support, or further assistance, please contact Wisdomlit customer service through the retailer where the product was purchased or refer to the contact information provided on the product packaging or official Wisdomlit websitio.
Nota importante sobre os vídeos
No official seller videos with verifiable source information were provided in the product data. Therefore, no videos have been embedded in this manual.