Stelpro SIBT2W Built-in Double Pole Mechanical Thermostat Instruction Manual

1. Introdución

The Stelpro SIBT2W is a built-in double-pole mechanical thermostat designed for precise temperature control in a wide range of electric heating applications. Compatible with systems operating between 120V and 600V, this thermostat is compatible with Stelpro's Brava electric baseboards and other similar heating systems. Its simple mechanical dial allows for easy and accurate adjustments, ensuring optimal comfort in both residential and commercial spaces. Constructed from durable materials, this thermostat is built to last, offering reliable performance and ease of use.

2. Información de seguridade

• AVISO: Risk of electric shock. Disconnect power at the main service panel before installing or servicing this product.
• A instalación debe ser realizada por un electricista cualificado de acordo coas normas eléctricas locais e nacionais.
• Do not use this thermostat with heating systems other than electric baseboard heaters.
• Asegúrese de que todas as conexións de cableado estean seguras e debidamente illadas.
• Manteña o termostato seco e lonxe de fontes de auga.

3. Produto rematadoview

The Stelpro SIBT2W thermostat offers the following key features:

• Ancho VoltagRango: Operates across 120V to 600V systems, providing flexibility for various heating applications.
• Double Pole Disconnect: Fully disconnects power to the heater when turned off, enhancing safety and energy savings in colder climates.
• Compatibilidade: Specifically designed for use with electric baseboards, particularly the Stelpro Brava series.
• Simple and Reliable: Mechanical dial allows for straightforward temperature adjustments, ensuring consistent comfort.
• Fácil instalación: Designed for quick and seamless integration into your heating system, suitable for residential and commercial use.

Figura 1: Fronte view of the Stelpro SIBT2W thermostat module. This image displays the front of the Stelpro SIBT2W thermostat module, highlighting the mechanical dial for temperature adjustment and the attached electrical wires for connection.

4. Instalación

The Stelpro SIBT2W thermostat is designed for built-in installation within compatible electric baseboard heaters. Follow these general steps for installation. For detailed wiring diagrams and specific instructions, always refer to the manual included with your product and consult a qualified electrician.

1. Desconectar a enerxía: Before beginning any installation, turn off the power to the heating circuit at the main electrical panel. Verify that the power is off using a voltagprobador.
2. Access Heater Wiring: Open the wiring compartment of your electric baseboard heater.
3. Identificar o cableado: Determina o voltage of your heater. Typically, if the wires are black and white, your heater is likely 120V. If the wires are black and red (sometimes two black or two red), your heater is likely 240V or higher. For the safest results, consider consulting a qualified electrician if you're unsure.
4. Conectar o termostato: Connect the heater's load wires to the LOAD terminals on the thermostat. Connect the power supply wires to the POWER terminals on the thermostat. Ensure all connections are tight and secure.
5. Termostato de montaxe: Secure the thermostat module within the baseboard heater's designated compartment using the provided screws.
6. Pechar o compartimento: Replace the cover of the wiring compartment.
7. Restaurar enerxía: Turn the power back on at the main electrical panel.

Figura 2: Lado view of the Stelpro SIBT2W thermostat with dimensions. A side view of the Stelpro SIBT2W thermostat, including its approximate dimensions (2-3/8 inches / 61 mm height, 2-1/4 inches / 58 mm width), illustrating its compact design for built-in installation.

Figura 3: Traseira view of the Stelpro SIBT2W thermostat. The back of the Stelpro SIBT2W thermostat is shown, detailing the L1, L2, and load terminals for electrical connections. This view is crucial for proper installation.

5. Funcionamento

The Stelpro SIBT2W thermostat features a straightforward mechanical dial for easy temperature control.

1. Axuste da temperatura: Rotate the dial clockwise to increase the desired temperature and counter-clockwise to decrease it.
2. Posición Off: Turn the dial completely to the 'OFF' position to fully disconnect power to the baseboard heater. This is a double-pole disconnect, ensuring complete power cut-off for enhanced safety and energy savings.
3. Rango de temperatura: The thermostat allows for temperature adjustments within a comfortable range, typically indicated on the dial.

Figura 4: Stelpro SIBT2W thermostat installed on a baseboard heater. This image demonstrates the Stelpro SIBT2W thermostat seamlessly integrated into a white Stelpro Brava electric baseboard heater, showcasing its discreet and functional appearance once installed.

6. Mantemento

To ensure optimal performance and longevity of your Stelpro SIBT2W thermostat and connected baseboard heater, regular maintenance is recommended.

• Limpeza: At least every 6 months, or as required, turn off power to the heater at the main disconnect panel. Wait for the element to cool. Gently clean the thermostat and the heater's grill with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Inspección: Periodically inspect the thermostat and wiring for any signs of damage, wear, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
• Non lubricar: Do not lubricate the thermostat's mechanical components or the heater's motor.

7 Solución de problemas

If you experience issues with your Stelpro SIBT2W thermostat, consider the following common troubleshooting steps:

• Sen calor: Ensure the thermostat dial is set to a temperature above the current room temperature. Check that the power to the heater is on at the main electrical panel. Verify all wiring connections are secure.
• Calefacción inconsistente: Ensure the thermostat is not obstructed by furniture or curtains, which can affect temperature readings. The thermostat should be located in an area with good air circulation.
• High-Temperature Safety Shutoff: All Stelpro heaters come with a built-in high-temperature safety shutoff that stops electricity flow if the heater gets too hot. If this occurs, turn off power, allow the heater to cool, and then restore power. If the issue persists, consult a qualified electrician.
• Consulte a un electricista: For any persistent electrical issues or if you are unsure about wiring or repairs, always consult a qualified electrician.

8. Especificacións

9. Garantía e soporte

For warranty information, technical support, or further assistance, please visit the official Stelpro website or contact their customer service. Stelpro is known for its comprehensive web presence and support resources.