Aigo Q2507 Mini-Tower PC Case Instruction Manual

Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your Aigo Q2507 Mini-Tower PC Case. Please read this manual thoroughly before beginning any installation to ensure proper assembly and safe usage. This PC case is designed to house standard desktop components, supporting M-ATX and ITX motherboards.

Información de seguridade

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Use unha pulseira antiestática para evitar danos por descarga electrostática (ESD) en compoñentes sensibles.
• Handle components carefully. Avoid touching pins or circuit boards directly.
• Ensure all cables are routed properly and do not obstruct airflow or moving parts.
• Keep the case away from sources of heat, direct sunlight, and moisture.
• Do not attempt to modify the case structure, as this may void your warranty and pose safety risks.

Contido do paquete

Verifique que todos os elementos estean presentes no seu paquete:

• Aigo Q2507 Mini-Tower PC Case
• Accessory kit (screws, standoffs, cable ties)
• Manual de usuario (este documento)

Configuración

1. Preparación do caso

Before installation, remove both side panels of the case. Typically, these are secured with thumbscrews at the rear of the case.

Imaxe: En ángulo view of the Aigo Q2507 Mini-Tower PC Case, showing the front panel and the side panel removed, revealing the internal structure.

2. Instalación da placa base

1. Install the necessary motherboard standoffs onto the motherboard tray. The Q2507 supports M-ATX and ITX motherboards.
2. Coloca con coidado a placa base sobre os separadores, aliñando os orificios dos parafusos.
3. Fixa a placa base cos parafusos fornecidos. Non os apertes demasiado.

Imaxe: Interna view of the Aigo Q2507 PC Case, highlighting the motherboard tray area with pre-drilled holes for standoffs.

3. Instalación da unidade de almacenamento

The case supports 1 x SSD and 1 x HDD.

1. Locate the drive bays. SSDs typically mount on the motherboard tray or dedicated brackets, while HDDs use a cage.
2. Secure your SSD(s) and HDD(s) using the appropriate screws from the accessory kit.

Imaxe: Interna view of the Aigo Q2507 PC Case, showing the designated areas for installing storage drives (SSD and HDD).

4. Expansion Card Installation (VGA)

A caixa inclúe 4 ranuras de expansión.

1. Remove the necessary slot covers from the rear of the case.
2. Insert your graphics card (VGA) or other expansion cards into the corresponding PCIe slots on your motherboard.
3. Secure the card(s) with screws. The maximum VGA length supported is 250 mm.

Image: Rear internal view of the Aigo Q2507 PC Case, showing the four expansion slots and the rear fan mount.

5. Cooling Fan Installation

The case supports one 120 mm fan on the side and one 80 mm fan on the rear.

1. Mount the fans to their designated positions using fan screws.
2. Connect the fan power cables to your motherboard or power supply.

Image: Angled front-side view of the Aigo Q2507 PC Case, with an internal fan visible through the side panel vent.

6. Conexións do panel frontal

Connect the front panel cables (USB 2.0, Audio, Microphone, Power button, Reset button, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.

Imaxe: Primeiro plano frontal view of the Aigo Q2507 PC Case, showing the front I/O panel with USB 2.0 ports, audio jacks, and power/reset buttons.

7. Xestión de cables

Route all cables neatly behind the motherboard tray or through designated cutouts to improve airflow and aesthetics. Use cable ties if necessary.

8. Pechamento do caso

Once all components are installed and cables are managed, reattach the side panels and secure them with the thumbscrews.

En funcionamento

After completing the setup, connect your monitor, keyboard, mouse, and power cable to your assembled PC. Press the power button on the front panel to start your system. Ensure all peripherals are functioning correctly.

Mantemento

• Limpeza: Regularly clean dust from the case interior and fan filters using compressed air or a soft brush. Dust buildup can impede airflow and lead to overheating.
• Fluxo de aire: Ensure the case has adequate ventilation. Do not block the air intake or exhaust vents.
• Xestión de cables Periodically check cable routing to ensure no cables are interfering with fans or obstructing airflow.

Resolución de problemas

• O sistema non se acende: Check all power connections, including the power supply to the wall, motherboard 24-pin, and CPU 8-pin connectors. Ensure front panel power switch cable is correctly connected to the motherboard.
• Sobrequecemento: Verify that all fans are spinning correctly and are not obstructed. Clean any dust buildup. Ensure proper thermal paste application on the CPU cooler.
• Sen visualización: Confirm that your graphics card is properly seated in its PCIe slot and that the monitor cable is securely connected to the graphics card.
• Os portos USB non funcionan: Check the front panel USB cable connection to the motherboard header.

Especificacións

Image: Diagram illustrating the dimensions of the Aigo Q2507 Mini-Tower PC Case: 26.5 cm (depth) x 16.5 cm (width) x 34 cm (height).

Garantía

This Aigo Q2507 Mini-Tower PC Case comes with a 12 meses de garantía from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.

Apoio

For technical assistance, warranty claims, or further inquiries, please contact your retailer or visit the official Aigo website for support resources. When contacting support, please have your product model (Q2507) and proof of purchase readily available.

Recursos en liña: www.aigo.com (Exampa ligazón, por favor, verifica a oficial websitio)