Milex 2 Burner Gas Braai

Introdución

Thank you for choosing the Milex 2 Burner Gas Braai. This manual provides essential information for the safe assembly, operation, and maintenance of your new gas braai. Please read these instructions thoroughly before use and retain them for future reference.

The Milex 2 Burner Gas Braai features powerful burners for precise heat control, a sleek design, and high-quality materials for durability. It includes convenient features such as a warming rack, automatic ignition, and a gas bottle hook.

Información importante de seguridade

• Só para uso exterior: This appliance is designed for outdoor use only. Do not operate indoors.
• Ventilación: Ensure adequate ventilation. Do not operate in an enclosed area.
• Cilindro de gas: Store gas cylinders in a well-ventilated area, away from heat sources.
• Materiais inflamables: Keep flammable materials, liquids, or aerosols away from the appliance.
• Proba de fugas: Always perform a leak test on all gas connections before first use and after any gas cylinder change.
• Nenos e animais: Keep children and pets away from the hot appliance.
• Supervisión: Nunca deixe o aparello sen vixilancia mentres estea en uso.
• Ler as instrucións: Always read and follow all instructions in this booklet before operating the appliance.

Configuración e montaxe

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included assembly diagram for detailed steps.

1. Montar o corpo principal: Follow the instructions to connect the base and main grill housing.
2. Attach Side Shelves: Secure the side shelves to the main body using the provided hardware. These shelves offer convenient space for utensils and platters.
3. Instalar rodas: Attach the wheels to the designated locations on the base for easy mobility.
4. Place Cooking Grills and Warming Rack: Position the black matte enamel cast iron cooking grill and the iron wire warming rack inside the braai.
5. Connect Gas Regulator and Hose: The braai comes with a ZA regulator and 60cm PVC hose. Connect the hose to the braai's gas inlet and the regulator to your gas bottle. Ensure all connections are tight.
6. Realizar unha proba de fugas: Before first use, apply a soapy water solution to all gas connections. Bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not use the braai if a leak is detected.

Figura 1: Fronte view of the Milex 2 Burner Gas Braai, illustrating its compact design and side shelves.

Instrucións de funcionamento

Acendendo os queimadores:

1. Tapa aberta: Always open the braai lid before lighting.
2. Turn on Gas Supply: Ensure the gas bottle valve is fully open.
3. Ignite First Burner: Push and turn the control knob for the left burner to the "HIGH" position. Immediately push and hold the ignitor button for 3-5 seconds. You should hear a click and see the burner ignite.
4. Ignite Second Burner: Once the left burner is lit, turn its control knob to "HIGH". The right burner will automatically ignite from the flame of the left burner.
5. Axustar a calor: Once both burners are lit, adjust the control knobs to your desired heat level (LOW to HIGH).
6. Troubleshooting Ignition: If a burner does not light within 5 seconds, turn off the gas supply, wait 5 minutes, and repeat the lighting procedure. If ignition issues persist, refer to the Troubleshooting section.

Cooking with Your Braai:

• Prequecemento: Close the lid and allow the braai to preheat for 10-15 minutes on medium heat before placing food on the grill.
• Control de temperatura: Use the control knobs to adjust the flame intensity for different cooking requirements. The integrated thermometer in the hood allows for accurate temperature monitoring.
• Estante de quecemento: Utilize the warming rack to keep cooked food warm or to gently toast buns.
• Cociña uniforme: The black matte enamel cast iron cooking grill ensures even heat distribution for consistent results.

Figure 2: The Milex 2 Burner Gas Braai in use, demonstrating the cooking surface and side shelves.

Mantemento e coidados

• Limpeza das reixas da grella: After each use, once the braai has cooled, clean the black matte enamel cast iron cooking grill. The product care instructions specify "Hand Wash Only" for these components. Use a grill brush to remove food residue.
• Limpeza exterior: Wipe down the steel hood and front panel with a damp pano e deterxente suave. Evite produtos de limpeza abrasivos que poidan danar o acabado.
• Mantemento do queimador: Periodically check burner ports for blockages (e.g., from food debris or insects). Clean with a wire brush if necessary.
• Almacenamento: When not in use for extended periods, store the braai in a dry, protected area. Disconnect the gas bottle.

Resolución de problemas

Especificacións do produto

• Marca: Milex
• Modelo: 2 Burner Gas Braai
• Cor: Negro
• Material: Stainless Steel (Burner, Thermometer, Handle), Steel (Hood & Front Panel), Cast Iron (Cooking Grill), Iron Wire (Warming Rack)
• Dimensións do paquete: 79 x 58 x 44 cm
• Peso do artigo: 13 kg
• Queimadores: 2, #409 Stainless Steel
• Ignición: Encendido Automático
• Compoñentes incluídos: Gas Braai, ZA Regulator, 60cm PVC Hose
• Uso recomendado: Outdoor Home Use

Garantía e Soporte

For warranty information or technical support, please contact Milex customer service. Spare part information is not available or provided directly in this manual. Please refer to the official Milex website or your retailer for further assistance.

You can visit the official Milex store for more products and information: Milex Store on Amazon.co.za