1. Introdución
This manual provides essential information for the safe and efficient operation of your LEESKY 2000 Watt Pure Sine Wave Power Inverter. This device converts 12V DC battery power into stable 120V AC power, suitable for a wide range of applications including RVs, solar systems, emergency backup, and off-grid power needs. Please read this manual thoroughly before installation and use.
Image 1.1: The LEESKY 2000 Watt Pure Sine Wave Power Inverter shown with its remote controller, battery cables, and grounding wire.
2. Información de seguridade
Always prioritize safety when working with electrical equipment. Failure to follow these instructions may result in electric shock, fire, or damage to the inverter or connected devices.
- Garantir unha ventilación adecuada ao redor do inversor para evitar o sobreenriquecido.
- Connect the inverter only to a 12V DC power source. Verify battery voltage antes da conexión.
- Always connect the grounding wire to a proper earth ground.
- Non expoña o inversor á auga, á choiva ou a humidade excesiva.
- Avoid operating the inverter in the presence of flammable fumes or gases.
- Non abra o inversor casing. Non hai pezas que o usuario poida reparar no interior.
- Asegurar o wat totaltagA potencia dos electrodomésticos conectados non supera a potencia nominal de saída continua do inversor (2000 W).
Image 2.1: The inverter incorporates seven major protection features: high temperature, short circuit, low/over voltage, overload, reverse polarity, high input voltage, and isolated input/output design.
3. Características do produto
The LEESKY 2000 Watt Pure Sine Wave Power Inverter is designed for reliable and efficient power conversion.
- Potencia de saída continua: Provides 2000W of continuous pure sine wave power, with a peak overload capacity of 2200W.
- Vol. De saídatage: Converts 12V DC to stable 110V/120V AC at 60Hz.
- Múltiples puntos de venda: Equipped with three 15A AC outlets and one 2.4A USB port for versatile device charging.
- Onda sinusoidal pura: Delivers clean power with less than 3% Total Harmonic Distortion (THD), ensuring compatibility with sensitive electronics like laptops, medical equipment, and audio systems without buzzing.
- UL-Certified Components: Constructed with UL-certified circuit boards and transformers for enhanced safety and reliability.
- Protección integral: Features seven major protections including low-input voltage, high-input voltage, overload, short circuit, overheat, reverse polarity, and isolated input/output design.
- Sistema de refrixeración: Advanced dual intelligent cooling fans reduce machine temperature, prevent overheating, and operate quietly.
- Control remoto: Includes a 15ft remote controller for convenient power management from a distance.
Image 3.1: The inverter can power a variety of household and electronic devices, such as coffee makers, mini-fridges, microwaves, televisions, drones, and mobile phones. Ensure total wattage non supera os 2000W.
Image 3.2: Pure Sine Wave inverters are compatible with a wider range of sensitive electronics compared to modified sine wave inverters, providing stable and clean power.
4. Contido do paquete
Verifica que todos os elementos estean presentes no paquete ao desembalar:
- LEESKY 2000 Watt Pure Sine Wave Power Inverter
- 15ft Remote Controller
- 2ft Battery Cables (1x black, 1x red, 5AWG)
- 3ft Earth Cable (14AWG)
- 4x Shockproof Pads
- Manual de instrucións (este documento)
Image 4.1: The package includes the inverter unit, a remote controller with a 15ft cable, 2ft 5AWG battery cables (red and black), a 3ft 14AWG earth cable, and four shockproof pads.
5. Configuración e instalación
Follow these steps for safe and correct installation of your power inverter.
- Montaxe: Choose a dry, well-ventilated location for the inverter. Ensure there is sufficient space around the unit for airflow. Use the provided shockproof pads if desired.
- Conexión da batería:
- Ensure the inverter is turned off.
- Connect the red battery cable to the positive (+) terminal of your 12V battery and the positive (+) terminal on the inverter.
- Connect the black battery cable to the negative (-) terminal of your 12V battery and the negative (-) terminal on the inverter.
- Tighten all connections securely to prevent loose contacts and arcing.
- Conexión a terra: Connect the green/yellow earth cable to the grounding terminal on the inverter and to a reliable earth ground point (e.g., vehicle chassis, ground rod). This is crucial for safety.
Image 5.1: Proper connection of the grounding terminal is essential for electrical safety.
- Remote Controller Connection: Plug the 15ft remote controller cable into the designated port on the inverter. This allows you to power the inverter on/off and monitor battery status from a convenient location.
Image 5.2: The remote controller provides convenient access to power and battery status.
The inverter is compatible with various 12V battery types, including GEL, SLA, LI (Lithium), FLD, AGM, and CLA. Ensure your battery is fully charged before use.
Image 5.3: The inverter is designed to work with a range of 12V battery chemistries.
6. Instrucións de funcionamento
Once properly installed, operating the inverter is straightforward.
- Encendido: Press the power button on the inverter or the remote controller. The LED power indicator will illuminate green, indicating the inverter is active.
Image 6.1: The LED indicators provide visual feedback on the inverter's status.
- Conectar dispositivos: Plug your AC appliances into the 120V AC outlets and USB devices into the 2.4A USB port. Ensure the total power consumption does not exceed 2000W.
- Estado do monitor: The remote controller displays battery status. The inverter's digital display (if applicable) shows input voltage and power usage.
- Apagado: Press the power button again to turn off the inverter when not in use. This conserves battery power.
7. Mantemento
Un mantemento regular garante un rendemento óptimo e unha maior duración do inversor.
- Limpeza: Manteña o inversor limpo e libre de po e residuos. Use un pano seco para limpar o exterior. Non empregue produtos de limpeza líquidos.
- Ventilación: Periodically check that the cooling fan vents are clear and unobstructed.
- Conexións: Regularly inspect battery and grounding cable connections for tightness and corrosion. Clean any corrosion with a wire brush.
- Almacenamento: Se vai gardar o inversor durante un período prolongado, desconécteo da batería e gárdeo nun lugar fresco e seco.
8 Solución de problemas
Esta sección aborda problemas comúns cos que podes atoparte.
| Problema | Causa posible | Solución |
|---|---|---|
| Sen saída de enerxía | Inverter off; loose battery connections; low battery voltage; blown fuse | Turn on inverter; check and tighten battery cables; charge battery; inspect and replace internal fuses (professional service recommended). |
| Overload alarm/shutdown | Connected appliance wattage exceeds 2000W | Reduce a carga desconectando algúns electrodomésticos. Reinicia o inversor. |
| Overheat alarm/shutdown | Poor ventilation; blocked cooling fans; excessive ambient temperature | Ensure clear airflow around the inverter; clean fan vents; move inverter to a cooler environment. Allow unit to cool before restarting. |
| Baixo voltage alarma/apagada | Batería voltage moi baixo | Recarga ou substitúe a batería de 12 V. |
| Vol. Altotage alarma/apagada | Vol. De entradatage moi alto | Verifique o vol de entradatage from the battery is within the specified range (typically 10.5V-15V for 12V systems). |
Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente.
9. Especificacións
| Especificación | Valor |
|---|---|
| Nome do modelo | 2000W 12V Pure Sine Wave Power Inverter (LS-2000YAR-OR) |
| Potencia Continua | 2000 vatios |
| Potencia máxima | 2200 Watts (Overload) |
| Vol. De entradatage | 12V DC |
| Vol. De saídatage | 110 V-120 V CA |
| Frecuencia de saída | 60 Hz |
| Forma de onda de saída | Pure Sine Wave (<3% THD) |
| Saídas AC | 3 (15A each) |
| Porto USB | 1 (2.4A) |
| Eficiencia de conversión | Ata o 90% |
| Dimensións do produto | 15 x 7.9 x 3.8 polgadas |
| Peso do elemento | 11.86 libras |
| Fabricante | Leesky |
10. Garantía e soporte
Your LEESKY 2000 Watt Pure Sine Wave Power Inverter comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable operation under normal use conditions.
For technical assistance, troubleshooting, or warranty claims, please contact LEESKY customer support. Have your model number (LS-2000YAR-OR) and purchase information ready when contacting support.
Image 10.1: LEESKY offers a 12-month warranty and dedicated customer support, backed by reliable UL components and product liability insurance.
