1. Introdución
This instruction manual provides detailed information for the installation, maintenance, and troubleshooting of the replacement accessory kit compatible with Xiaomi Robot Vacuum S20 and D106 models. This kit is designed to maintain the optimal performance of your robot vacuum cleaner.
Figura 1: Compatibilidade sobreview for Xiaomi Robot Vacuum S20 and D106.
2. Compoñentes do produto
O kit de substitución inclúe os seguintes compoñentes:
- 2 x Main Brushes (Roller Brushes)
- 6 x pinceis laterais
- 6 filtros HEPA
- 6 panos de fregona
Figura 2: Máisview of all included replacement parts.
3. Guía de instalación
Before installing any new components, ensure your robot vacuum cleaner is powered off and unplugged from its charging base.
3.1 Main Brush Installation
- Turn the robot vacuum cleaner upside down.
- Locate the main brush cover, usually secured by latches or screws.
- Open or unscrew the cover and remove the old main brush.
- Clean any debris from the brush compartment.
- Insert the new main brush, ensuring the ends align with the slots.
- Peche a tapa da escobilla principal e asegúrea.
Figure 3: Main brush component.
3.2 Side Brush Installation
- Turn the robot vacuum cleaner upside down.
- Locate the side brushes. They are typically held by a single screw.
- Unscrew and remove the old side brush.
- Align the new side brush with the screw hole.
- Secure the new side brush with the screw.
Figure 4: Side brush components.
3.3 Instalación do filtro HEPA
- Abre o compartimento do colector de po do teu robot aspirador.
- Retire o colector de lixo.
- Locate the filter within the dustbin and remove the old HEPA filter.
- Clean the dustbin thoroughly.
- Insert the new HEPA filter into the designated slot in the dustbin.
- Reinstall the dustbin into the robot vacuum.
Figure 5: HEPA filter components.
3.4 Mop Cloth Installation
- Locate the mop cloth attachment on your robot vacuum. This may be a separate water tank or a dedicated mop plate.
- Remove the old mop cloth, typically attached via Velcro or a sliding mechanism.
- Attach the new mop cloth, ensuring it is securely fastened and covers the entire mop area.
- If applicable, fill the water tank before reattaching the mop module to the robot.
Figure 6: Mop cloth component.
4. Consideracións operativas
Once the replacement parts are installed, your robot vacuum cleaner should operate as usual. It is recommended to run a test cleaning cycle to ensure all components are functioning correctly. The new parts are designed to restore optimal cleaning performance, including efficient dust removal and effective floor mopping.
5. Mantemento
Regular maintenance of these replacement parts will extend their lifespan and ensure consistent cleaning performance.
- Cepillo principal: Periodically remove the main brush and clean any tangled hair or debris. The main brush is designed to be easily removable for cleaning.
- Cepillos laterais: Check side brushes for wear or damage. Remove any hair or debris that may have accumulated around the base. Replace if bristles are bent or worn.
- Filtro HEPA: Tap the filter gently to remove dust. The HEPA filters can be washed with water and air-dried for reuse. Ensure the filter is completely dry before reinserting it into the dustbin.
- Pano de fregona: After each mopping cycle, remove the mop cloth and wash it. It can be hand-washed or machine-washed. Allow it to air dry completely before reattaching.
6 Solución de problemas
If you encounter issues after replacing components, consider the following:
- Rendemento de limpeza reducido: Ensure all brushes are installed correctly and free from obstructions. Check if the HEPA filter is clean and properly seated.
- Ruídos pouco comúns: Verify that the main brush and side brushes are securely installed and not obstructed by foreign objects.
- Mop Not Wetting Floor: Ensure the mop cloth is properly attached and the water tank (if applicable) is filled. Check for any blockages in the water dispensing mechanism of your robot vacuum.
- Pezas que non encaixan: Double-check that your robot vacuum model is indeed Xiaomi S20 or D106. These parts are specifically designed for these models.
7. Especificacións
| Compoñente | Cantidade | Dimensións aproximadas | Material |
|---|---|---|---|
| Pincel principal | 2 | 176 mm de lonxitude | Plástico, cerdas |
| Cepillo lateral | 6 | 45 mm arm length | Plástico |
| Filtro HEPA | 6 | 120 mm x 61 mm | Plástico, Medios filtrantes |
| Pano de fregona | 6 | 272 mm de ancho | Fibra |
Figure 7: Component dimensions.
Peso total do kit: Aproximadamente 7.2 onzas (204 gramos)
8. Garantía e soporte
All products are tested before shipping to ensure quality. This product is a compatible spare part and not an original Xiaomi product. For any inquiries or support regarding this replacement kit, please refer to the seller's contact information on the platform where the purchase was made.
