WOOXGEHM T6125 Digital Insulation Resistance Tester User Manual

1. Introdución

This manual provides detailed instructions for the safe and effective operation of the WOOXGEHM T6125 Digital Insulation Resistance Tester. The T6125 is a robust, shockproof, and dustproof instrument designed for measuring insulation resistance, absorption ratio (DAR), polarization index (PI), AC voltage, and low resistance. It features a wide measurement range, multiple output voltage levels, a large LCD with backlight, and strong anti-interference capabilities, making it suitable for various electrical equipment testing applications.

Figure 1: WOOXGEHM T6125 Digital Insulation Resistance Tester.

2. Información de seguridade

To ensure safe operation and prevent damage to the instrument or injury to personnel, please read and understand all safety instructions before use.

• Always observe local and national safety codes.
• Do not operate the tester if it appears damaged or is not functioning properly.
• Ensure the circuit under test is de-energized and discharged before connecting test leads for resistance measurements.
• Use only the provided test leads and accessories.
• Avoid touching the test leads or the circuit under test during measurement, especially when high voltages están presentes.
• Do not use the instrument in wet environments or explosive atmospheres.
• Substitúa as pilas canto antes apareza o indicador de pila baixa.

3. Contido do paquete

Verifique que todos os elementos que se indican a continuación estean presentes no seu paquete:

• 1 x WOOXGEHM T6125 Digital Insulation Resistance Tester
• 1 x par de cables de proba
• 1 x External Power Plug (5.5mm)
• 2 pinzas de cocodrilo
• 1 x bolsa de tela
• 1 Manual de usuario (inglés)

4. Produto rematadoview

The T6125 insulation tester is designed for comprehensive electrical insulation testing. Key features include:

• Medición de resistencia de illamento: Measures insulation opposition, absorption ratio, and polarization index.
• Vol. ACtage Medición: Capable of measuring AC voltage.
• Low Resistance Measurement: For continuity checks.
• Multiple Test Voltages: Offers 100V, 250V, 500V, 1000V, and 2500V test voltage opcións.
• Automatic Discharge Function: Ensures safety after high voltage probas.
• Retención de datos: Freezes the displayed measurement for easy recording.
• Over-range Alarm: Alerts the user when measurements exceed the selected range.
• Apagado automático: Apágase despois de 30 minutos de inactividade para aforrar batería.
• Gran pantalla LCD retroiluminada: Provides clear readings in various lighting conditions.
• Deseño duradeiro: Shockproof, dustproof, and dampness-proof construction.

Figure 2: Front panel layout and key components of the T6125.

• Alto Voltage Output Black Negative Jack: Connects the negative test lead for high voltage probas.
• Alto Voltage Output Red Positive Jack: Connects the positive test lead for high voltage probas.
• Resistor Red Positive Jack: Connects the positive test lead for resistance measurements.
• Resistive Black Negative Jack: Connects the negative test lead for resistance measurements.
• 12V Power Input Jack: Para fonte de alimentación externa.
• Pantalla LCD: Shows measurement readings and status.
• Botón de proba: Initiates a measurement.
• Botón de retención de datos: Freezes the current display.
• Botón de retroiluminación: Activates/deactivates the LCD backlight.
• DAR (Absorption Ratio) / PI (Polarization Index) Button: Selects DAR or PI measurement mode.
• Gear Rotary Switch: Selects measurement function and test voltage.

Figure 3: The T6125 features an automatic shutdown function after 30 minutes of inactivity to conserve battery life.

5. Configuración

5.1 Instalación da batería

The T6125 requires 8 x 1.5V AA batteries (not included).

1. Localice o compartimento da batería na parte traseira da unidade.
2. Abra a tapa do compartimento da batería.
3. Insira 8 pilas AA, asegurándose de polaridade correcta (+/-).
4. Pecha a tapa do compartimento da batería de forma segura.

5.2 Conexión dos cables de proba

Connect the test leads to the appropriate jacks on the front panel based on the measurement type. For insulation resistance tests, use the High Voltage Output jacks. For low resistance, use the Resistor jacks.

6. Instrucións de funcionamento

6.1 Encendido/apagado

Rotate the Gear Rotary Switch from the "OFF" position to any measurement function to power on the device. Rotate back to "OFF" to power off. The device will automatically shut down after 30 minutes of inactivity.

6.2 Medición da resistencia de illamento

This function measures the insulation resistance of electrical equipment.

1. Asegúrese de que o circuíto baixo proba estea desenergizado e descargado de forma segura.
2. Connect the test leads to the High Voltage Output jacks (red to positive, black to negative).
3. Connect the other ends of the test leads to the insulation points of the equipment to be tested.
4. Rotate the Gear Rotary Switch to the desired insulation test voltage (e.g., 100V, 250V, 500V, 1000V, 2500V).
5. Manteña premido o PROBA button. The measurement will begin, and the resistance value will be displayed on the LCD.
6. Soltar o PROBA button to stop the measurement. The instrument will automatically discharge the circuit.
7. To hold the reading, press the ATENCIÓN button during or after a measurement. Press again to release.

Figure 4: The T6125 offers a wide insulation test measurement range up to 2500V and 200.0GΩ.

6.3 Absorption Ratio (DAR) and Polarization Index (PI) Measurement

DAR and PI are used to assess the quality of insulation over time.

1. Follow steps 1-3 for Insulation Resistance Measurement.
2. Rotate the Gear Rotary Switch to the desired insulation test voltage.
3. Preme o DAR/PI button to select the desired mode. The display will indicate "DAR" or "PI".
4. Manteña premido o PROBA button. The instrument will automatically perform the timed measurements and display the DAR or PI value.
5. Soltar o PROBA botón.

6.4 AC Voltage Medición

Para medir AC voltage:

1. Rotate the Gear Rotary Switch to the "ACV" position.
2. Connect the test leads to the circuit where AC voltagÉ preciso medir e.
3. O AC voltage aparecerá na pantalla LCD.

6.5 Low Resistance Measurement

For continuity or low resistance checks:

1. Rotate the Gear Rotary Switch to the "Ω" (low resistance) position.
2. Connect the test leads to the Resistor jacks.
3. Connect the other ends of the test leads to the component or circuit to be measured.
4. The resistance value will be displayed on the LCD.

7. Mantemento

7.1 Limpeza

Limpar o instrumento co anuncioamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the instrument is completely dry before storage or next use.

7.2 Almacenamento

When not in use for extended periods, remove the batteries to prevent leakage. Store the instrument in the provided cloth bag in a cool, dry place, away from direct sunlight and extreme temperatures.

• Temperatura de almacenamento: de -20 ℃ a 60 ℃
• Working Conditions: 0℃ to 40℃
• Humidade relativa: 40% a 75%

8 Solución de problemas

If you encounter issues with your WOOXGEHM T6125, refer to the following common problems and solutions:

• Sen enerxía:
  • Comprobe se as baterías están instaladas correctamente e teñen a carga suficiente. Substitúaas se é necesario.
  • Ensure the Gear Rotary Switch is not in the "OFF" position.
• Lecturas inexactas:
  • Verify test leads are securely connected and not damaged.
  • Ensure the correct measurement function and test voltage son seleccionados.
  • Clean the test points on the equipment being measured.
  • Comprobe se hai fontes de interferencia externas.
• "OL" or Over-range Display:
  • The measured value exceeds the selected range. Try a higher test voltage or a different range if applicable.
  • Asegúrate de que a conexión ao circuíto sexa axeitada.

Se o problema persiste, póñase en contacto co servizo de atención ao cliente.

9. Especificacións

Insulation Test Accuracy (T-6125)

Figure 5: Detailed insulation test accuracy specifications for the T6125 model.

Figure 6: Physical dimensions of the WOOXGEHM T6125.

10. Garantía e soporte

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WOOXGEHM websitio. Garde o recibo da compra como xustificante da mesma.