1. Introdución
Thank you for choosing the VOLT Stemless Directional Brass Path Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new low voltage landscape lighting fixture. This path light is designed for outdoor use, providing widespread illumination for pathways, walkways, gardens, driveways, and patios.
Image: The VOLT Stemless Directional Brass Path Light installed along a pathway, providing warm illumination.
2. Información de seguridade
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- This product is intended for use with a 12V low voltage landscape lighting system. A low voltage transformer (not included) is required for operation.
- Do not connect directly to 120V household current.
- Ensure power is disconnected at the transformer before installing or servicing the fixture.
- All electrical connections must comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.
- Do not operate the fixture with a damaged cord or if the lens is cracked.
- Manteña os nenos e as mascotas lonxe da zona de instalación.
- This fixture is designed for outdoor use and is water-resistant. However, avoid submerging the fixture in water.
3. Que hai na caixa
O paquete inclúe os seguintes compoñentes:
- VOLT Stemless Directional Brass Path Light
- 9-inch Ground Stake
- Mounting Hardware (for surface mounting)
Nota: A G4 LED bi-pin bulb and a low voltage transformer are sold separately and are required for full functionality.
4. Características
- Baixo Profile Deseño: Standing 1.96 inches tall with a 2.71-inch diameter, this light minimizes obstruction and risk of damage.
- Professional Grade Construction: Made from solid cast brass with a bronze finish and a heavy frosted acrylic lens for durability.
- Lamp Listo: Designed for use with a G4 LED bi-pin bulb (not included) rated up to 20W, providing 140 degrees of light output.
- Montaxe versátil: Includes a 9-inch ground stake for landscape installation and hardware for surface mounting.
- Resistencia á corrosión: Features a beryllium copper socket for enhanced corrosion resistance.
- Moisture-Tightness: Machine-threaded body screws onto an O-ring for a secure, moisture-tight seal.
- Listado UL/cUL: Garante o cumprimento das normas de seguridade.
5. Especificacións
| Atributo | Detalle |
|---|---|
| Marca | VOLT |
| Nome do modelo | VOLT Stemless Directional Brass Path Light |
| Número de modelo | BDL-VPL-1053-4-BBZ-ZON |
| Cor | Bronce |
| Material | Latón, Metal |
| Dimensións do produto | 2.71 cm de longo x 1.96 cm de ancho x 2.71 cm de alto |
| Forma de luminaria | Camiño |
| Fonte de enerxía | Corded Electric (Low Voltage) |
| Voltage | 12 voltios (CA) |
| Tipo de fonte de luz | LED (G4 Bi-pin bulb, not included) |
| Base de bulbo | G4 |
| Max Wattage | 20W (for G4 LED bi-pin bulb) |
| Tipo de instalación | Surface Mount, Ground Stake |
| Uso interior/exterior | Ao aire libre |
| Nivel de resistencia á auga | Resistente á auga |
| Certificacións | Listado UL / cUL |
6. Instalación
Before beginning installation, ensure the power to your low voltage transformer is turned OFF.
6.1. Instalación da lámpada
- Carefully remove the top cap of the path light by unscrewing it.
- Insert a G4 LED bi-pin bulb (sold separately) into the beryllium copper socket. Ensure the pins are fully seated.
- Replace the top cap, screwing it firmly to ensure a moisture-tight seal.
Imaxe: Primeiro plano view of the VOLT Stemless Directional Brass Path Light, showing its compact design.
6.2. Opcións de montaxe
The VOLT Stemless Directional Brass Path Light offers two primary mounting methods:
6.2.1. Ground Stake Installation
- Thread the path light onto the included 9-inch PVC ground stake.
- Select a desired location in your landscape. Ensure the location allows for proper drainage and is clear of underground utilities.
- Push the ground stake firmly into the soil until the path light is at the desired height and stable. For hard soil, pre-dig a small pilot hole.
- Ruta o baixo voltage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.2.2. Surface Mounting
- Identify the desired surface for mounting (e.g., deck, patio edge).
- Use the provided mounting hardware to secure the base of the path light to the surface. Pre-drill pilot holes if necessary.
- Ensure the fixture is securely fastened and stable.
- Ruta o baixo voltage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.3. Wiring to Transformer
- Conecta o baixo voltage wire from the path light to the common and 12V terminals on your low voltage transformador.
- Asegúrese de que todas as conexións estean firmes e seguras.
- Once all fixtures are installed and wired, turn on the power at the transformer.
Vídeo: Este vídeo ofrece unha visión xeralview of the VOLT Stemless Brass Bronze Directional Path Light, highlighting its features and demonstrating mounting options. It shows how to attach the light to a ground stake and how to prepare it for surface mounting.
7. Instrucións de funcionamento
The VOLT Stemless Directional Brass Path Light operates as part of a low voltage landscape lighting system controlled by a transformer. There are no direct controls on the fixture itself.
- Once properly installed and connected to a low voltage transformer, the light will turn on and off according to the transformer's settings (e.g., timer, photocell).
- Ensure the transformer is set to the desired operating schedule.
8. Mantemento
Regular maintenance will help ensure the longevity and optimal performance of your path light.
- Limpeza: Limpe periodicamente a luminaria e a lente cun pano suave eamp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners.
- Substitución da lámpada: If the bulb burns out, ensure the power to the transformer is off before replacing the G4 LED bi-pin bulb. Follow the bulb installation steps in Section 6.1.
- Inspección de cableado: Annually inspect wiring for any signs of damage, fraying, or loose connections. Repair or replace as needed.
- Estabilidade do dispositivo: Check that the fixture remains securely mounted, whether on a ground stake or surface. Re-secure if loose.
9 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | No power to transformer Conexión de cableado solta Bombilla defectuosa Transformer timer/photocell setting | Check power supply to transformer Inspect and tighten all wire connections Substitúe a lámpada Adjust transformer settings |
| Luz parpadea | Bombilla solta Conexión de cableado solta Bombilla incompatible | Ensure bulb is fully seated Inspect and tighten all wire connections Ensure G4 LED bi-pin bulb is compatible with 12V AC systems |
| A luz é débil | Baixo voltage do transformador Lente sucia Bombilla wattage moi baixo | Check transformer output voltage Limpar a lente Substitúeo por unha potencia máis altatage G4 LED bi-pin bulb (up to 20W) |
10. Garantía e soporte
The VOLT Stemless Directional Brass Path Light is backed by a Garantía de por vida. Esta garantía cobre os defectos nos materiais e na fabricación no uso normal.
For warranty claims, technical assistance, or any questions regarding your product, please contact VOLT Lighting customer support. Refer to the official VOLT Lighting websitio web ou a documentación da súa compra para obter información de contacto actualizada.
Fabricante: VOLT Lighting
UPC: 842032134007