Introdución
Thank you for choosing SOLPEX Solar Lights. These outdoor lights are designed to provide efficient and versatile illumination for various outdoor spaces such as fences, decks, steps, porches, and gardens. Featuring dual color temperature options, three lighting modes, and an IP65 waterproof rating, these lights offer reliable performance and enhanced ambiance.
O que hai na caixa
O paquete inclúe os seguintes elementos:
- Solar Lights (12 units)
- Ferraxes de montaxe (parafusos e ancoraxes de parede)
- Manual de usuario
Características
- Temperatura de cor dual: Offers Cool White, Warm White, and Neutral Light options, selectable via a single button press.
- Bright and Spacious Lighting: Equipped with convex lenses to enhance brightness by up to 50%, covering an area of approximately 160 sq. ft.
- Operación automática: Lights automatically activate at dusk and turn off at dawn.
- Construción duradeira: Made from high-quality ABS material with an IP65 waterproof rating, ensuring resistance to rain, snow, and extreme temperatures (-4℉ to 140℉).
- Carga eficiente: Features a monocrystalline solar panel and a 600mAh rechargeable battery, achieving full charge in 6-8 hours of direct sunlight with 25% conversion efficiency. Provides extended nighttime illumination.

Image: The SOLPEX solar light is designed to be all-weather resistant, featuring IP65 waterproofing, and resistance to cold, heat, and rust.

Image: Explains the convex lens technology, which provides brighter, more focused illumination over 160 sq. ft., enhancing color uniformity and reducing glare.
Configuración e instalación
Before installation, ensure the solar panel is exposed to direct sunlight for 6-8 hours to achieve an initial full charge. It is recommended to cover the solar panel and press the switch to test if the lights are working properly before permanent installation.
- Escolla localización: Selecciona unha localización que reciba ample direct sunlight throughout the day for optimal charging. The lights can be installed on fences, railings, steps, walls, or decks.
- Marcar puntos de perforación: Use the provided template or measure the distance between the two screw holes on the back of the light (approximately 34mm or 1.34 inches). Mark these points on your desired mounting surface.
- Perforación: Drill pilot holes at the marked points. Insert the plastic expansion screws (wall anchors) into the holes if mounting on masonry or drywall.
- Parafusos seguros: Drive the screws into the wall anchors or directly into wood, leaving a small portion of the screw head exposed.
- Luz do Monte: Align the keyhole slots on the back of the solar light with the exposed screw heads and slide the light downwards to secure it.
- Alternative Mounting (Adhesive): For surfaces where drilling is not preferred, use the provided 3M adhesive pads. Ensure the surface is clean and dry before applying the adhesive. Press firmly for secure attachment.

Image: Installation steps for SOLPEX Solar Lights, showing how to mark holes, secure screws, and mount the light. Adhesive pads are also an option.

Image: A single SOLPEX solar light mounted on a wooden fence post, showcasing its compact design and solar panel.
Instrucións de funcionamento
The SOLPEX Solar Lights are designed for simple, automatic operation.
- On/Off automático: The lights feature a built-in light sensor. They will automatically turn on at dusk and turn off at dawn, conserving energy.
- Cambio de modos de iluminación: Each light has a small button (ON/OFF/MODE SWITCH). Press this button to cycle through the three available lighting modes:
- Branco frío
- Branco Cálido
- Luz neutra

Image: Demonstrates the three color temperature options (Cool White, Warm White, Neutral Light) and highlights the mode switch button on the light unit.

Image: Explains the automatic illumination cycle: 6-8 hours of daytime charging provides over 16 hours of light at night, with a 25% solar conversion rate.
Mantemento
To ensure optimal performance and longevity of your SOLPEX Solar Lights, follow these maintenance guidelines:
- Limpar os paneis solares: Regularly wipe the solar panels with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Eliminar obstáculos: Ensure no trees, bushes, or other objects are shading the solar panels, especially during peak sunlight hours.
- Substitución da batería: While the rechargeable battery is designed for long-term use, its lifespan can vary. If you notice a significant decrease in lighting duration, the battery may need replacement. Refer to the manufacturer for compatible replacement batteries.
- Inspeccionar por danos: Periodically check the lights for any physical damage, such as cracks in the casing or loose components. Despite the IP65 rating, severe damage can compromise waterproofing.
Resolución de problemas
If your SOLPEX Solar Lights are not functioning as expected, consider the following:
- A luz non se acende pola noite:
- Carga insuficiente: Ensure the solar panel receives 6-8 hours of direct sunlight daily. Relocate the light if necessary.
- Posición do interruptor: Verify that the ON/OFF/MODE switch is in the "ON" position and not "OFF".
- Luz ambiental: The light sensor may be detecting other light sources (e.g., streetlights, house lights), preventing the solar light from activating. Relocate the light or eliminate competing light sources.
- Duración de iluminación curta:
- Inadequate Sunlight: The solar panel might not be receiving enough direct sunlight for a full charge. Clean the panel and ensure no obstructions.
- Battery Degradation: Over time, rechargeable batteries can lose capacity. Consider replacing the battery if the issue persists after ensuring proper charging.
- Water Inside the Light:
- Integridade do selo: While IP65 rated, extreme conditions or physical damage can compromise seals. Inspect the unit for cracks or gaps. If water ingress is observed, contact customer service.
Especificacións
| Marca | SOLPEX |
| Número de modelo | 10047 |
| Cor | Negro |
| Material | Acrilonitrilo Butadieno Estireno (ABS) |
| Fonte de luz | LED |
| Opcións de cor clara | Warm, Natural, White (3CCT) |
| Brillo | 800 lúmenes |
| Fonte de enerxía | Energía solar |
| Capacidade da batería | Batería recargable de 600 mAh |
| Eficiencia do panel solar | 25 % de eficiencia de conversión |
| Tempo de carga | 6-8 horas (luz solar directa) |
| Duración da iluminación | >16 hours (after full charge) |
| Nivel de resistencia á auga | IP65 |
| Temperatura de funcionamento | -4℉ a 140℉ |
| Dimensións (L x W x H) | 3.5 cm de longo x 2.2 cm de ancho x 3.5 cm de alto |
| Tipo de montaxe | Soporte de parede |
Garantía e Soporte
SOLPEX provides a 12-month worry-free assurance for this product. The manufacturer warranty description states 6 months. For any issues or assistance, please contact SOLPEX customer service.
For customer service inquiries, please refer to the contact information provided with your product packaging or visit the official SOLPEX store on Amazon: SOLPEX Store.