Olafus 180W Motion Sensor Outdoor Light (Model: 5-LBG180MJ) Instruction Manual

Introdución

Thank you for choosing the Olafus 180W Motion Sensor Outdoor Light. This product is designed to provide powerful and efficient outdoor illumination with advanced motion detection and dusk-to-dawn capabilities. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your device.

Image: The Olafus 180W Motion Sensor Outdoor Light, featuring five adjustable LED heads and a motion sensor, designed for outdoor security and illumination.

Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• Olafus 180W Motion Sensor Outdoor Light (with integrated power cord)
• Tornillos de montaxe (3x)
• Expansion Rubber Plugs (3x)
• Manual de instrucións (este documento)

Image: Diagram showing the dimensions of the Olafus 180W Motion Sensor Outdoor Light and the included mounting hardware: machine screws and expansion rubber plugs.

Información de seguridade

• Desconecte sempre a alimentación antes da instalación ou do mantemento.
• Asegúrese de que a fonte de enerxía voltage coincide cos requisitos do produto (120 V).
• Non intente modificar o produto. Calquera modificación pode anular a garantía e supoñer riscos para a seguridade.
• Avoid looking directly into the light source when illuminated to prevent eye strain.
• Install the light in a location where it is protected from direct impact.
• This product is rated IP65 waterproof for outdoor use; however, ensure the plug connection is secure and protected from direct water exposure if not using a waterproof outlet cover.

Configuración e instalación

The Olafus 180W Motion Sensor Outdoor Light features a plug-and-play design for easy installation. No complex wiring is required.

1. Escolla un lugar de montaxe: Select a suitable outdoor location such as a wall, eave, garage, or backyard area. Ensure the location allows for optimal motion sensor coverage and light distribution.
2. Marcar os puntos de perforación: Hold the light fixture in the desired position and mark the locations for the mounting screws.
3. Perforación: Drill pilot holes at the marked points. If mounting on masonry or concrete, insert the expansion rubber plugs into the drilled holes.
4. Asegure o accesorio: Align the mounting holes on the fixture with the drilled holes and secure the light using the provided screws. Ensure the fixture is firmly attached.
5. Axustar os cabezales das luces: Loosen the adjustment screws on each light head and the motion sensor. Position the five light heads to achieve the desired illumination area. The heads are adjustable up to 360° horizontally and 90° vertically. Tighten the screws once adjusted.
6. Conectar: Connect the power cord to a standard 120V outdoor electrical outlet. It is recommended to use a GFCI-protected outlet and a weatherproof outlet cover for added safety. The power cord length is approximately 4.92 feet (1.5 meters).

Image: Visual guide demonstrating the two main steps for easy installation: securing the light fixture to a pole or wall and plugging it into an electrical outlet.

Image: The flood light mounted on a wall, showing the power cord connected to an outdoor outlet.

Image: The flood light mounted under an eave, illustrating another common installation method.

Instrucións de funcionamento

The motion sensor has three adjustable dials: MODE, TIME, and DIST (Distance).

Image: Diagram illustrating the 180° sensing angle and maximum 72-foot detection range of the motion sensor.

Imaxe: Unha detallada view of the motion sensor and the adjustable light heads.

Configuración do modo:

• Modo de PROBA: Used for initial setup and testing the motion sensor's range and sensitivity. The light will turn on for a short period (typically a few seconds) when motion is detected, regardless of ambient light.
• Modo AUTO (Sensor de movemento): The light will only activate when motion is detected in low-light conditions. The duration the light stays on is determined by the TIME setting.
• D2D (Dusk-to-Dawn) Mode: The light will automatically turn on at 30% brightness at dusk and remain on until dawn. When motion is detected, it will switch to 100% brightness for the duration set by the TIME dial, then return to 30% brightness.

Image: Visual representation of the Motion Sensor Mode (light activates upon motion) and Dusk-to-Dawn Mode (light stays at 30% brightness at night, increasing to 100% with motion, then turning off at dawn).

Configuración HORA:

This dial controls how long the light remains at full brightness after motion is detected. Options typically include 1 minute, 3 minutes, and 10 minutes. Adjust to your preference.

DIST (Distance) Setting:

This dial adjusts the sensitivity and detection range of the motion sensor. Settings typically include Low (L), Medium (M), and High (H).

• L (baixo): Approximately 13-26 feet detection range.
• M (medio): Approximately 26-49 feet detection range.
• H (Alto): Approximately 49-72 feet detection range.

Mantemento

The Olafus 180W Motion Sensor Outdoor Light is designed for durability and minimal maintenance.

• Limpeza: Limpe periodicamente a luminaria e a lente do sensor de movemento cun pano suave eamp un pano para eliminar o po, a sucidade ou os residuos. Non empregue produtos de limpeza abrasivos nin disolventes.
• Inspección: Regularly inspect the power cord for any signs of damage or wear. Ensure all mounting screws remain tight.
• Resistencia á intemperie: The light is IP65 waterproof, meaning it is protected against dust and low-pressure water jets. It is suitable for use in rain and snow.

Image: The flood light operating in rainy conditions, demonstrating its IP65 waterproof rating and suitability for various weather conditions including snow, rain, and wind.

Imaxe: Primeiro plano view of the light fixture's multiple cooling fins, designed for efficient heat dissipation to ensure a long lifespan.

Resolución de problemas

Especificacións

Información da garantía

The Olafus 180W Motion Sensor Outdoor Light (Model: 5-LBG180MJ) comes with a 2 anos de garantía do fabricante. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

Atención ao cliente

If you have any questions, require technical assistance, or need to make a warranty claim, please contact Olafus customer support through the retailer where you purchased the product or visit the official Olafus websitio para información de contacto.

Para máis información, podes visitar o Tenda Olafus en Amazon.