Manual do usuario do destilador de alcohol VEVOR

1. Introdución

This manual provides detailed instructions for the safe and efficient operation of your VEVOR Alcohol Still. This 3-gallon stainless steel distiller is designed for home brewing and refining various spirits and essential oils. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.

Imaxe 1.1: Acabadoview of the VEVOR Alcohol Still and its components.

2. Instrucións de seguridade

Siga sempre as seguintes pautas de seguridade para evitar lesións ou danos no equipo:

• Ensure all connections are securely tightened before operation to prevent steam leakage. Use a wrench for firm connections.
• Operate the distiller in a well-ventilated area to avoid accumulation of vapors.
• Do not touch hot surfaces during or immediately after operation. Allow the unit to cool completely before handling.
• Manteña os nenos e as mascotas lonxe da unidade de funcionamento.
• Always monitor the temperature during distillation using the built-in thermometer.
• Do not overfill the fermentation barrel.
• Ensure the one-way exhaust valve is properly installed and functioning during fermentation to release gases.
• Use appropriate heating methods and ensure stable placement of the unit on the heat source.
• The kit is made from food-grade materials; however, always clean components thoroughly before and after each use.

Image 2.1: Illustration of the leak-proof plug, built-in sealing ring, and sturdy sealing buckle, crucial for safe operation.

3. Lista de compoñentes e pezas

Your VEVOR Alcohol Still kit includes the following components:

• Fermentation Barrel (3 Gal / 11.4 L capacity)
• Barrel Lid with integrated Dual Display Thermometer
• Cooling Pot with Stainless Steel Corrugated Coils
• Water Pump (8W)
• Válvula de escape unidireccional
• Tubo de saída de bebidas alcohólicas
• Silicone Tubes (various sizes for connections)
• SUS304 Corrugated Tubes
• Leak-proof Plugs and Sealing Rings
• Manual de usuario

Image 3.1: Detailed diagram showing the main components and their dimensions.

Image 3.2: Visual representation of the cooling pot and distillation barrel setup with water pump.

4. Instrucións de configuración

Siga estes pasos para montar o seu alambique de alcohol VEVOR:

1. Desempaquetar compoñentes: Retire con coidado todas as pezas da embalaxe e verifique coa lista de compoñentes.
2. Assemble Fermentation Barrel: Place the barrel lid onto the fermentation barrel. Ensure the built-in seals are properly seated for a secure fit. Fasten the four fixed sealing latches firmly.
3. Instalar termómetro: The dual display thermometer is integrated into the lid. Ensure it is securely in place.
4. Attach One-way Exhaust Valve: Insert the one-way exhaust valve into its designated opening on the barrel lid. This is crucial for gas release during fermentation.
5. Connect Cooling Pot: Position the cooling pot on top of the fermentation barrel.
6. Conectar tubos:
   • Connect the flexible stainless steel pipe from the fermentation barrel to the inlet of the cooling pot.
   • Attach the copper steam outlet pipe from the cooling pot to the liquor outlet tube.
   • Connect the silicone tubes for water circulation between the cooling pot and the water pump. Ensure the water pump's outlet connects to the cooling pot's inlet and the cooling pot's outlet connects back to the water reservoir.
7. Conexións seguras: Apply silicone leak-proof plugs at all corrugated pipe joints and use a wrench to securely tighten all connections. This prevents steam leakage and ensures safety.
8. Prepare Water Pump: Place the water pump in a separate bucket or container filled with cold water and ice for efficient cooling.

Image 4.1: Diagram illustrating the assembly and water circulation path for the cooling system.

5. Instrucións de funcionamento

5.1. Fermentation Process (Optional)

If you are fermenting your mash directly in the barrel:

1. Prepare your ingredients (e.g., fruit, grain, barley, rice) and mash according to your recipe.
2. Fill the fermentation barrel, ensuring not to exceed the recommended fill level.
3. Ensure the one-way exhaust valve is properly installed. This valve will release excess gas produced during fermentation, maintaining stable air pressure.
4. For optimal fermentation, add half of the water to the exhaust valve before use.
5. Allow the fermentation process to complete as per your recipe's requirements.

Image 5.1: Close-up of the fermentation barrel lid showing the one-way exhaust valve and dual display thermometer.

5.2. Distillation Process

1. Prepare for Distillation: If not already done, ensure the fermentation barrel contains the liquid to be distilled. Secure the lid and all connections as per the setup instructions.
2. Calefacción: Place the fermentation barrel on a suitable heat source. The thickened stainless steel bottom is compatible with various heating methods, including wood fire, gas stoves, and ceramic/electric coil stoves.
3. Monitor de temperatura: Continuously monitor the temperature using the dual display thermometer on the lid. The thermometer displays temperatures in both Celsius (0°C to 200°C) and Fahrenheit (50°F to 400°F). Maintain the desired temperature range for your distillation process.
4. Activate Cooling System: Ensure the water pump is submerged in a bucket of cold water, preferably with plenty of ice. Turn on the water pump to initiate water circulation through the cooling pot's stainless steel corrugated coils. This facilitates effective condensation of steam.
5. Recollida de destilado: As steam condenses in the cooling coils, the distilled liquid will exit through the liquor outlet tube. Collect the distillate in a clean container.
6. Eficiencia de refrixeración: For faster cooling rates and to avoid frequent water changes, it is highly recommended to use a large capacity bucket for the cooling water and to add ample ice.
7. Finalización: Continue distillation until the desired volume or purity is achieved. Turn off the heat source and water pump.

Image 5.2: Diagram showing the internal stainless steel coil and the condensate circulation system with controllable flow.

Imaxe 5.3: Ex.ample of the distiller in an outdoor setting, demonstrating the cooling water setup.

6. Mantemento

Proper maintenance ensures the longevity and hygiene of your distiller:

• Limpeza despois do uso: After each distillation, allow the unit to cool completely. Disassemble the components and thoroughly clean all parts that came into contact with the liquid or steam. Use warm soapy water and a soft brush. Rinse thoroughly with clean water.
• Secado: Ensure all components are completely dry before reassembly or storage to prevent water spots or corrosion.
• Almacenamento: Store the distiller in a clean, dry place, away from direct sunlight and extreme temperatures.
• Inspect Seals and Tubes: Periodically inspect silicone seals and tubes for any signs of wear, cracks, or damage. Replace them if necessary to maintain a leak-proof system.

7 Solución de problemas

Aquí tes algúns problemas comúns e as súas posibles solucións:

8. Especificacións

9. Garantía e soporte

Para obter información sobre a garantía, asistencia técnica do produto ou para mercar pezas de reposto, consulte a páxina oficial de VEVOR. websitio web ou póñase en contacto directamente co servizo de atención ao cliente de VEVOR. Garde o recibo de compra para reclamacións de garantía.

VEVOR Oficial Websitio: www.vevor.com